Abstract:The microstructural evolution and tensile performance of a meta-stable β-type biomedical Ti−10Mo−6Zr−4Sn−3Nb (Ti-B12) alloy subjected to one-stage aging (OSA) and two-stage aging (TSA) are investigated in this work. The OSA treatment is performed at 510°C for 8 h. The TSA treatments are composed of low-temperature aging and high-temperature aging. In the first step, low-temperature aging is conducted at 325°C for 2 h. In the second step, the aging temperature is the same as that in the OSA. The result of the microstructure evolution shows that the precipitated secondary phase after aging is mainly influenced by the process of phase transition. There is a marked difference in the microstructure of the Ti-B12 alloy subjected to the OSA and TSA treatments. The needle-shaped α phases are precipitated in the parent β phase after the OSA treatment. Conversely, the short shuttle-like α phases precipitated after the TSA treatment are formed in the β matrix with the aid of the role of the isothermal ω transitional phase-assisted phase transition. The electron backscattered diffraction results indicate that the crystallographic orientation relationship of the α phases precipitated during the TSA treatment is basically analogous to those in the OSA treatment. The relatively higher tensile strength of 1,275 MPa is achieved by strengthening the effect of the short shuttle-like α precipitation with a size of 0.123 μm in length during the TSA treatment, associating with a suitable elongation of 12% at room temperature simultaneously. The fracture surfaces of the samples after the OSA and TSA treatments indicate that preventing the coarsening of the α layers in the grain boundaries is favorable for the enhancement of strength of Ti-B12 at room temperature. MTT test was carried out to evaluate the acute cytotoxicity and biocompatibility of the implanted material using L929 cells. The relative proliferation rates of cytotoxicity levels 0, 1, 2, 3, and 4 are ≥100, 80–99, 50–79, 30–49, and 0–29%, respectively. The cytotoxicity of the Ti-B12 alloy is slightly better than that of the Ti−6Al−4V alloy, which can meet the requirements of medical materials for biomedical materials.

Mechanical Properties and Corrosion Behavior of a Beta Titanium Alloy

Bio-Corrosion Behaviors and Bio-Compatibilities of Tinbzrta and Tinbzrtamo High Entropy Alloys

Corrosion Behaviour and Biocompatibility Evaluation of Low Modulus Ti–16Nb Shape Memory Alloy As Potential Biomaterial

Effects of Zirconium on mechanical and electrochemical properties of Ti-15mo alloy for biomedical applications

Effects of Cold Rolling Deformation and Solution Treatment on Microstructural, Mechanical, and Corrosion Properties of a Biocompatible Ti-Nb-Ta-Zr Alloy

Corrosion resistance and in vitro response of a novel Ti35Nb2Ta3Zr alloy with a low Young's modulus

Influence of heat treatment on the microstructure, wettability, and corrosion resistance of a Ti–30Nb–7Zr alloy used in biomedical applications

Impact of scandium on mechanical properties, corrosion behavior, friction and wear performance, and cytotoxicity of a β-type Ti–24Nb–38Zr–2Mo alloy for orthopedic applications

CORROSION RESISTANCE OF β-PHASE TITANIUM ALLOYS UNDER SIMULATED INFLAMMATORY CONDITIONS: EXPLORING THE RELEVANCE OF BIOCOMPATIBLE ALLOYING ELEMENTS

Corrosion resistance and cytocompatibility of Ti–19Zr–11Nb–4Ta shape memory alloy for biomedical applications

Optimizing Suitable Mechanical Properties for a Biocompatible Beta-Titanium Alloy by Combining Plastic Deformation with Solution Treatment

Electrochemical and biological characterization of Ti–Nb–Zr–Si alloy for orthopedic applications

Effect of Anodic Oxidation on Antibacterial Properties and Biocompatibility of Ti‐13Nb‐13Zr‐3Cu for Biomedical Application

Microstructure, mechanical properties and corrosion behavior of Ti-Mo-Al shape memory alloy

Effect of Molybdenum on the Mechanical and Corrosion Properties of Ti-xMo-2Fe Beta Alloys

Preparation and characterization of metastable β-type titanium alloys with favorable properties for orthopedic applications

Corrosion Properties of Ti-Nb-Sn Alloys Prepared by Mechanical Alloying

Improvement of the Corrosion Resistance and Potential for Metal Ion Release of Titanium Alloy Ti-6Al-4V ELI in Hanks Balanced Salt Solution (HBSS) after Thermomechanical

Influence of Isothermal ω Transitional Phase-Assisted Phase Transition From β to α on Room-Temperature Mechanical Performance of a Meta-Stable β Titanium Alloy Ti−10Mo−6Zr−4Sn−3Nb (Ti-B12) for Medical Application

Phase Constitution, Mechanical Property and Corrosion Resistance of the Ti-Nb Alloys

Novel Bioactive Ti-Zn Alloys with High Strength and Low Modulus for Biomedical Applications