Abstract:Synthesis of WO3 nanostructures We have synthesized WO3 nanostructures such as nanowires, nanorods bundles and nanotubes bundles by a facile hydrhtermal method described as follows: First, two kinds of acid solutions were prepared, one was hydrochloric acid solution (2M) by adding concentrated hydrochloric acid (12M) to de-ionized water with the volume ratio of 1:5, another was citric acid solution (2M) by dissolving citric acid power (12.61 g) into 30 ml de-ionized water. Then sodium tungstate power (0.66 g) was dissolved in 20 ml de-ionized water under vigorous magnetic stirring and then ammonium sulfate (0.53 g) was dissolved in the Na2WO4 solution (a compared experiment was also conducted without (NH4)2SO4), after stirring for 30 min, 2M HCl solution was slowly dropped into the mixed solution under magnetic stirring until the pH value of the solution reached 0.5-2 and then the solution was transferred into a Teflon-lined 50 ml capacity autoclave, and maintained at 180 C for 4 h. After reaction, the autoclave cooled down naturally to room temperature and the precipitate was centrifuged and washed with de-ionized water and absolute ethanol for 2-3 times to remove ions that possibly remained at the final products, then dried at 60 C for 12 h. Meanwhile, another experiment was carried out with 2M citric acid solution as the acidification agent instead of 2M HCl solution to adjust the pH value of solution in the presence of ammonium sulfate while keeping other conditions unchanged.

Synthesis and Application to Gasochromics of WO3 Nanostructures Based on Sol-Gel Method and Hydrothermal Process

Preparation of Nano Structured WO3 Thin Films and Gasochromic Properties

Preparation of Nano Structured WO3-SiO2 Composite Films and Gasochromic Properties

Gasochromic Properties of WO3-MoO3 Composite Films Prepared by Sol-Gel Process

Synthesis of monoclinic WO3 nanosphere hydrogen gasochromic film via a sol–gel approach using PS-b-PAA diblock copolymer as template

Nano WO3 gasochromic materials prepared by sol-gel process

Synthesis and Applications of Γ-Tungsten Oxide Hierarchical Nanostructures

Preparation of Porous Wo3 Films by Sol-Gel Process Using Amphiphilic Copolymer As Template and Their Hydrogen Gasochromic Properties

Synthesis and Characterization of Wo3 Nano-Powder Based on Micro-Reactor in Microemulsion System

A Study on Nano Structured Pd Doped WO3 Film and Gasochromic Property

Mechanism of Annealing Treatment Effect on the Gasochromic Properties of WO3 Bulks and Films

Effects of Water on the Gasochromc Properties of WO3 Thin Films

Structural study of WO3 and MoO3 compound films in H2 gasochromism

Influence of MoO 3 Addition on the Gasochromism of WO 3 Thin Films

Preparation And Characterization Of Wo3 Nano-Powder With Microemulsion Method

A low cost preparation of WO3 nanospheres film with improved thermal stability of gasochromic and its application in smart windows

Supporting Information Available : Synthesis of WO 3 nanostructures and their ultraviolet photoresponse property

Controllable synthesis of hexagonal WO<sub>3</sub> nanorod-cluster films with high electrochromic performance in NIR range

Preparation of Pd Doped WO 3 Films Via Sol-Gel Method and Their Gasochromic Properties

Structure Design and Performance Research of WO3 Hydrogen Gasochromic Film Prepared by Solvothermal Synthesis Assisted with Electrodeposition of Seed Layer