Abstract:Two compositions Ce0.50Zr0.39La0.04Y0.07O2−δ and Ce0.25Zr0.65La0.04Y0.06O2−δ based on ceria-zirconia solid solutions were prepared as nanopowders using a continuous hydrothermal flow synthesis reactor, followed by either freeze-drying or hotplate-drying of the slurry. Each dried nanopowder was then subjected to 10h heat-treatment at 1000°C, 1100°C or 1200°C in air (to simulate accelerated ageing). The reducibility and hydrogen consumption of the oxidised samples were measured using temperature programmed reduction (TPR) up to 1000°C. The effects of composition, drying method and heat-treatment temperature were evaluated on the TPR profiles of the materials. The powders were further investigated using a range of analytical methods including UV/Vis spectroscopy (which yielded colour data), Raman spectroscopy, powder X-ray diffraction, BET surface area measurements and X-ray photoelectron spectroscopy (XPS). Chemometric methods were used to investigate relationships between the spectroscopic and total oxygen storage capacity (OSC) data. Principal component analysis (PCA) was used to provide a simple interpretation of the effects of various synthesis and treatment parameters on Raman spectra. Principal component regression (PCR) was used to build regression models relating the Raman spectra and the temperature of hydrogen consumption peak at several set temperatures in the TPR. The total hydrogen consumption of the materials was generally high, while the drying and heat-treatment conditions appeared to have a significant effect on the final properties of the resulting powders, such as the surface area and total oxygen storage capacity.

Structure and Performance of KH570/A171 Modified Silica Sol Film on Zirconium Hydride Surface

Preparation of Zirconia/Organosilicone Thin Film by Sol-Gel Method

Organize modification of silica sol and its application in adhesives

Organic-Inorganic Hybrid Film Modified with Silica and Alumina Sols by Sol-Gel Method

Preparation and Tribological Behaviors of an Amide-Containing Stratified Self-Assembled Monolayers on Silicon Surface

Organosilanes Surface Modification of Zirconium Diboride Composite Engineering Ceramics and Its Effect on the Tribological Performance of Epoxy Composites

Synthesis and Characterization of Doped Nano-Sized Ceria–zirconia Solid Solutions

Investigations on the Impact of a Series of Alkoxysilane Precursors on the Structure, Morphology and Wettability of an Established Zirconium-Modified Hybrid Anticorrosion Sol–Gel Coating

Synthesis and characterization of hydrophobic glass-ceramic thin film derived from colloidal silica, zirconium(IV) propoxide and methyltrimethoxysilane via sol–gel method

Sol-gel Preparation of a Silica Antireflective Coating with Enhanced Hydrophobicity and Optical Stability in Vacuum

Dispersion and Functionalization of Nonaqueous Synthesized Zirconia Nanocrystals Via Attachment of Silane Coupling Agents

Direct Fabrication and Characterization of Zirconia Thick Coatings on Zirconium Hydride as a Hydrogen Permeation Barrier

Ordered mesoporous sulfated silica-zirconia materials with high zirconium contents in the structure

Solvent-free Zirconia Nanofluids/silica Single-Layer Multifunctional Hybrid Coatings

Tuning the Hydrophobicity of ZSM-5 Zeolites by Surface Silanization Using Alkyltrichlorosilane

THE ABRASION-RESISTANT FILM OF METHYLSILICONE MODIFIED BY BOEHMITE AND SILICA SOL

Preparation of KH570-SiO2 and their modification on the MF/PVA composite membrane

The amino acid sequence of cytochrome c from Spinacea oleracea L. (spinach).

Preparation and Thermal Stability of Polyorganosiloxane Superhydrophobic Film by Sol-Gel Method

Formation mechanism of composite secondary phase particles in a solution-treated Si-modified Zircaloy-4

Using in-situ conversed nano SiC to bond UHTC particles and construct anti-ablation coating