Abstract:The modification on the titanium (Ti) implant surface is an effective method to improve the bioactivity of Ti. In this study, a hydroxyapatite (HA)-deposited nanotubular Ti surface was prepared by anodization coupled with an alternative immersion method (AIM). Surface physicochemical characteristics including morphology, microstructure, composition, roughness were evaluated by field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), Fourier-transformed infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Preosteoblast cell (MC3T3-E1) behavior on the HA-deposited nanotube surface, including cell morphology, proliferation, alkaline phosphatase (ALP) activity, osteocalcin secretion, and mineralization, were also investigated. The untreated nanotube surface and bare Ti were used as controls. The results showed that synthetic HA crystals could be efficiently grown on/inside the nanotubes after AIM treatment in saturated Ca(OH)(2) and 0.02M (NH(4))(2) HPO(4). The amount of synthetic HA on nanotube layer was dependent on the number of dipping cycles. Significant increases in ALP activity and osteocalcin production on day 7 and 14 and calcium deposition on day 21 (P < 0.05) were observed for HA-deposited nanotubular Ti surface when compared with untreated nanotube layer and bare Ti. However, the cell proliferation rate on HA-deposited nanotube surfaces was slowed down significantly (P < 0.05). All these results indicated that this HA-deposited nanotube surface might have the potential benefit to enhance implant osseointegration. The synthetic HA TiO(2) nanotube loading might be a highly promising path to improve the bioactivity of Ti-based implants.

Surface treatment of hydroxyapatite for strengthening the bioactivity of biomaterials

A Comparative Study of in Vitro Apatite Deposition on Heat-, H(2)O(2)-, and NaOH-treated Titanium Surfaces.

Hydrothermal treatment of Ti surface to enhance the formation of low crystalline hydroxyl carbonate apatite

Biomimetic Deposition of Hydroxyapatite by Mixed Acid Treatment of Titanium Surfaces

Preparation of Hierarchical Porous Structure on Ti Surface and Bioactivity

[Fast Formation of Biomimetic Apatite Coatings on Pure Porous Titanium Implant's Surface].

Bioactive Performances of Surface Modification of Ti–6Al–4V Jointly Using Ultrasonic‐Assisted Microarc Oxidation and Hydrothermal Treatment

Osteoblast Responses to Thin Nanohydroxyapatite Coated on Roughened Titanium Surfaces Deposited by an Electrochemical Process.

Longer-Term Mechanical And Biological Evaluation Of Titanium Alloy Coated With Apatite Layer

BIOCERAMIC COATINGS ON TITANIUM SURFACES

Surface modification of titanium implant by microarc oxidation and hydrothermal treatment.

In vitro bioactive behavior of hydroxylapatite-coated porous Al(2)O(3)

Effect of heat-treatment atmosphere on the bond strength of apatite layer on Ti substrate

One-step Modification of Nano-Hydroxyapatite Coating on Titanium Surface by Hydrothermal Method

Mechanism of apatite formation on pure titanium treated with alkaline solution

Sol–gel preparation of bioactive apatite films

Ion beam treatment of titanium surfaces for enhancing deposition of hydroxyapatite from solution

Tailoring the Nanostructured Surfaces of Hydroxyapatite Bioceramics to Promote Protein Adsorption, Osteoblast Growth, and Osteogenic Differentiation

TEM Analysis and in Vitro and in Vivo Biological Performance of the Hydroxyapatite Crystals Rapidly Formed on the Modified Microarc Oxidation Coating Using Microwave Hydrothermal Technique

Apatite Formation Ability of Four Kind of Implant Surfaces in Simulated Body Fluid

Characterization and Preosteoblastic Behavior of Hydroxyapatite-Deposited Nanotube Surface of Titanium Prepared by Anodization Coupled with Alternative Immersion Method.