Abstract:In this work, the hydrogen desorption properties of the novel Mg-Al-H hydrogen storage composites prepared by ball-milling the as-received magnesium hydride (MgH2) and the as-prepared aluminum hydride (AlH3) with different molar ratios (1:1, 1:0.5, and 1:0.25) are investigated systematically. Nonisothermal desorption measurements show that more than 7.51 wt % of hydrogen is released from the Mg-Al-H composites when they are heated from room temperature to 500 degrees C. Thermal analysis by differential scanning calorimeter (DSC) and hydrogen desorption spectrum by mass spectrometer (MS-H-2) are used synchronously to study the desorption process of the Mg-Al-H. The onset hydrogen desorption temperature of MgH2 in the MgH2 + AlH3 composite is dramatically reduced from 320 degrees C for the pure MgH2 to below 252 degrees C. The DSC/MS-H-2 and the X-ray diffraction (XRD) analyses show that the desorption of MgH2 in the Mg-Al-H composite is composed of two steps with the reaction between MgH2 and Al forming Mg17Al12 as the first step and the self-decomposition of the residual MgH2 as the second step. Isothermal desorptions show that the desorption kinetics of the MgH2 in the Mg-Al-H composite is significantly improved. The apparent activation energy for the desorption of MgH2 in the MgH2 + 0.25AlH(3) is reduced to 144.6 kJ/mol, which contributes to the improvement in the desorption kinetics of MgH2. The Johnson-Mehl-Avrami (JMA) kinetic studies indicate that the desorption kinetic model of MgH2 in the Mg-Al-H composite is different from the pure MgH2. Concerning the reversibility, under the conditions of 300 degrees C and 5 MPa H-2, MgH2 in the Mg-Al-H composite is almost fully recovered after absorption for 5 h while it is partially recovered for the pure MgH2. Among the samples studied, the MgH2 + 0.25AlH(3) composite exhibits the highest reversible hydrogen storage capacity of 6.10 wt % (H/M).

Effects of grain sizes of Mg-based hydrogen storage materials on hydrogen absorption and desorption kinetics

Reaction kinetics of hydrogen absorption for Mg-based hydrogen-storage materials

Size-dependent kinetic enhancement in hydrogen absorption and desorption of the Li-Mg-N-H system.

Numerical Simulation of Intrinsic Absorption and Desorption Kinetics for Mg-3Ni-2MnO_2 Hydrogen Storage Materials

The influence of grain size and catalytic doping on magnesium hydride nanocrystals for hydrogen storage

Shell and Shrinking Core Kinetics Model of Mg-Based Hydrogen Storage Alloys

The effect of particle size on phase transformation behaviors of Mg-3Ni-2MnO2 hydrogen storage materials during dehydrogenation process

The Study of Heat Transfer and Mass Transfer for the Large Capacity Mg-3Ni-2MnO<sub>2</sub> Hydrogen Storage Material

Size-dependent Mechanical Properties of Mg Nanoparticles Used for Hydrogen Storage

Excellent Catalysis of Mn3O4 Nanoparticles on the Hydrogen Storage Properties of MgH2: an Experimental and Theoretical Study

The hydrogen storage behavior of Mg3La and Mg3LaNi0.1

Hydrogen desorption properties of the MgH2-AlH3 composites

Grain Size Effect of Mgh2 on Dehydrogenation Kinetics of 2libh(4) +mgh2 System

The "burst effect" of hydrogen desorption in MgH2 dehydrogenation

In-situ Formation of Uniform Mg2Ni Catalyst and Hydrogen Storage Properties of Mg41Ni Alloys with Varied Grain Sizes and Morphologies

Thermodynamics and kinetics of hydriding and dehydriding reactions in Mg-based hydrogen storage materials

Effect of in-situ formed Mg2Ni/Mg2NiH4 compounds on hydrogen storage performance of MgH2

In-situ formation of uniform Mg 2 Ni catalyst and hydrogen storage properties of Mg 41Ni alloys with varied grain sizes and morphologies

Catalytic Effect of Ni Nanoparticles on the Desorption Kinetics of MgH2 Nanoparticles

Synergistic Effect of New ZrNi5/Nb2O5 Catalytic Agent on Storage Behavior of Nanocrystalline MgH2 Powders

Catalytic Effect of in Situ Formed Nano-Mg2ni and Mg2Cu on the Hydrogen Storage Properties of Mg-Y Hydride Composites