Abstract:Titanium alloys are used in the aerospace industries, chemical industries, biomedicine, marine ships and other fields because of their high strength-to-weight ratio, good corrosion resistance, and biocompatibility. However, titanium alloys have low hardness and poor wear resistance, which limit their applications, especially under sliding contact. Plasma nitriding (PN) is an effective method for improving titanium alloy's tribological properties. PN can produce a composite layer composed of TiN and Ti2N to improve the friction and wear properties of titanium alloy. However, the high temperature in the nitriding treatment results in a brittle "alpha-stabilized layer" (a continuous layer of alpha phase titanium enriched with interstitial nitrogen atoms) and unfavorable phase transformations in the substrate that can impair the fracture toughness, ductility, and fatigue properties. In this study, a low-temperature plasma-composite treatment, consisting of plasma oxidizing and oxynitriding, has been developed to improve the hardness and wear resistance of Ti-6Al-4V alloy. The effect of the preoxidation process on the surface microstructure, phase composition, and wear performance of titanium alloy was studied. The microstructure and phase composition of the plasma-composite layer were observed using SEM, TEM, XRD, and other methods. The results showed that the composite layer of titanium alloy treated using plasma-composite-treatment is composed of compound and diffusion layers, and the phase is TiO2 (rutile) and TiN0.26. Microhardness and wear-resistance properties of the composite layer were characterized using microhardness tester, nanoindentation, and reciprocating-friction tester. The plasma-composite treatment can increase infiltration depth of the diffusion layer, surface hardness, elastic modulus, and wear resistance of the titanium alloy more than the traditional nitriding process.

Properties of Surface Layers Produced on the Titanium by Thermal Plasma Jet Nitriding

Plasma Nitridation and Mechanical Properties of Pure Titanium Casts

Plasma Spray Deposition Enhancement of Titanium Nitride Layer Using Nitrogen-Contained Plasma Irradiation of Titanium Substrate as a Pre-spraying Method

Properties of Titanium Nitride Fabricated on Stainless Steel by Plasma-Based Ion Implantation/Deposition

Research on Technology of Laser Gas Nitriding on TA2 Pure Titanium Surface

ELEMENTAL AND PHASE COMPOSITIONS AND MECHANICAL PROPERTIES OF TITANIUM SURFACE LAYER ALLOYED BY Zr, Nb, AND Al UNDER THE ACTION OF COMPRESSION PLASMA FLOWS

In situ formation of TiN coating on TA2 pure titanium via laser surface nitriding

Effect of Pre-Oxidation on Microstructure and Wear Resistance of Titanium Alloy by Low Temperature Plasma Oxynitriding

Anisotropic Phase Transformation Mechanism on Coarse-Grained and Fine-Grained Pure Titanium at Low-Temperature Plasma Nitriding

Nitriding of Steel and Titanium Surface Layers under the Action of Compression Plasma Flows

Microstructures and wear resistance of titanium-assisted nitrided layers on aluminum substrate

Investigating the Impact of Plasma Nitriding on Ti6Al4V Surface, Structural, and Mechanical Properties and Their Simultaneous Evaluation Via Laser Opto-Ultrasonic Dual Detection (LOUD) Approach

Investigation on Surface Nitridation of Titanium by Pulsed Laser

Reactive nitrogen plasma spray coating of titanium nitride: plasma torch design and coating analysis

The plasma nitriding treatment of TiN/TiCN multilayer films

High Temperature Plasma Nitriding to Modify Ti Coated C17200 Cu Surface: Microstructure and Tribological Properties

Tribological Behavior of Titanium Alloy Treated by Nitriding and Surface Texturing Composite Technology

Plasma Surface Niobium Alloying On Pure Titanium And Ti6al4v Alloy

Modification mechanism of Ti-6Al-4V alloy with pre-coated Ti-Cu-Al multilayer film treated by ion nitriding: Experiments and first-principles calculations

Influence of plasma nitriding temperature on microstructures and mechanical properties of Ti-N/Ti-Al multilayer coatings on the surface of 5083 Al alloys

Attempt to achieve low temperature plasma nitriding on Ti-6Al-4V alloy by surface nanocrystallization