Abstract:Bicrystals serve as a simplified model system for studying the deformation behavior of polycrystalline materials. In this study, we fabricated graphene nanosheets (GNSs) reinforced copper (Cu) matrix laminated composites using electrophoretic deposition and subsequent vacuum hot-press sintering. Interestingly, the composite exhibited a bicrystal microstructure, with two types of adjacent crystals, i.e., denoted as crystal A (φ 1 = 222.06, Φ = 40.54, φ 2 = 82.5) and crystal B (φ 1 = 141.36, Φ = 43.76, φ 2 = 1.94), displaying a twin orientation relationship. To investigate the deformation behavior of the GNS/Cu composite, we conducted interrupted room temperature uniaxial tensile tests combined with Scanning Electron Microscope (SEM) Electron Backscatter Diffraction (EBSD) characterization. To identify the activated slip systems in the composites, we performed trace analysis, applied the Schmid Factor law, analyzed the deformation gradient tensor, and conducted intragranular misorientation axis (IGMA) analysis. The trace analysis revealed that slip systems with high Schmid Factor values were favored during tension. Moreover, the deformation gradient tensor elements of the primary slip systems in the two crystals confirmed the deformation features observed by SEM. However, crystal B exhibited a significant deviation in trace angle. Further IGMA investigation revealed that during tension, some slip systems, which were not favored by the Schmid Factor law, were also activated in crystal B. The activation of these slip systems in crystal B can be attributed to the large deviation in the trace angle. The findings in this work provide valuable insights for exploring the underlying deformation mechanisms in polycrystalline materials.

Schmid Factor Maps for Predicting Slip and Twinning Behaviors in Zirconium

An Investigation of Slip and Twinning Behavior of a Zirconium Alloy During Plastic Deformation Based on In-Situ SEM-EBSD

Evolution of in-plane strain fields onset of a plastically deforming crack in zirconium

Characterisation of slip and twinning in high rate deformed zirconium with electron backscatter diffraction

Quantitative characterization of short fatigue crack and grain boundary interaction behavior in zirconium

Investigation of the Evolution of Schmid Factors (SF) in 316 Stainless Steel during In Situ Plastic Deformation

Micro-scale mechanism for cyclic deformation behavior in Zirconium under low-cycle-fatigue loading

Understanding Orientation-Dependent Plasticity in Laser Beam Powder Bed Fusion Stainless Steel Through Crystal Plasticity Modelling

Understanding plasticity in zirconium using in-situ measurement of lattice rotations

MACRO- AND MICROSCOPIC APPROACHES TO PLANE STRAIN DEFORMATION STATES OF FACE-CENTERED CUBIC METALS UNDER WEDGE INDENTATION

〈a〉 Prismatic, 〈a〉 basal, and 〈c+a〉 slip strengths of commercially pure Zr by micro-cantilever tests

Phase transformation and incompatibility at grain boundaries in zirconia-based shape memory ceramics: a micromechanics-based simulation study

Critical Resolved Shear Stress and Work Hardening Determination in HCP Metals: Application to Zr Single Crystals

Incommensurate modulated structure in zirconium under three-point bending deformation

The Plastic Deformation Mechanisms of hcp Single Crystals with Different Orientations: Molecular Dynamics Simulations

Identification of Active Slip Mode and Calculation of Schmid Factors in Magnesium Alloy

Study on deformation mechanisms and stretch formability of zirconium alloys with different textures under biaxial tensile stress

Twinning induced by elastic anisotropy in FCC crystals

Secondary slip of screw dislocations in zirconium

Identification of active slip modes in twinned bicrystals of GNS/Cu composite through intragranular misorientation axes analysis

Interfacial-constraint-mediated pyramidal slip of hexagonal titanium at room temperature