Abstract:The technology of microarc oxidation of valve metals is one of the promising methods for engineering the working surface of friction units of modern technology. As a result of the versatility of the technology, it is possible to obtain composite ceramic coatings and materials of various types. Their properties are set by the electrical modes of material formation, the chemical composition of the electrolyte, and the possible further modification of the ceramic matrix with micro- and nanosized tribofillers. Based on the practical results of their research in the field of creating coatings of various types by microarc oxidation, an analysis is given of the main areas of application of microplasma electrolytic oxidation technology, their advantages over other methods of surface modification, structure and properties of the materials obtained. It is possible to distinguish the modification of the friction surface of a part by the method of microplasma electrolytic oxidation in order to increase its hardness and wear resistance. Good results were obtained in increasing the wear resistance of the hardened working surface of the spinning machine parts, the number of equipment repairs was reduced by more than 20 times. The use of microarc oxidation is promising for the preparation of composite coatings, which are a ceramic matrix in which solid lubricating dispersed particles are embedded. The technology of forming a matrix on aluminum, modified with dispersed magnetite, graphite and molybdenum disulfide, has been developed. According to the results of comparative tribotechnical tests, it was found that the intensity of linear wear of the material filled with MoS2 is 3 times, and Fe3O4 - 1.6 times lower than that of the coatings without filler. Based on the technology of microplasma electrolytic oxidation, an original technology has been developed for obtaining mineral-ceramic material, which is a matrix of aluminum oxide and dispersed diamond inclusions. Abrasive wheels made from this material have a consistently high volumetric cutting ability, 1.5-3.5 times higher than the traditional analogues and are characterized by high diamond retention. The possibilities of microplasma oxidation have not yet been fully explored, the most promising direction being the creation of nanostructured coatings for a specific technological task.

Research Progress on Tribological Properties of Micro Arc Oxidation Coatings on Aluminum, Magnesium and Titanium Based Materials

Review of micro-arc oxidation of titanium alloys: Mechanism, properties and applications

The research progress on micro-arc oxidation of aluminum alloy

Improvement of tribological performance by micro-arc oxidation treatment on selective laser melting Ti6Al4V alloy

Tribological Behavior of Microarc Oxidation Coatings Formed on Titanium Alloys Against Steel in Dry and Solid Lubrication Sliding

Reexamination of some reactions of 3-(D-galactosylidenehydrazino)-1,2,4-triazino[5,6-b]indole.

Effect of Several Inorganic Additives on Microstructure and Properties of Microarc Oxidation Coating on Aluminium Alloy

Study of Micro-arc Oxidation as a Method for Improving the Technical Characteristics of AA5086 Aluminum and VT6 Titanium Alloys

Preparation of Micro-Arc Oxidation Ceramic Coating on Aluminum Alloys

Research progress on thermal oxidation process and wear, corrosion resistance and bioactivity of biomedical grade titanium alloy

A Review of Research on Improving Wear Resistance of Titanium Alloys

Improved Wear and Corrosion Resistance of Microarc Oxidation Coatings on Ti–6Al–4V Alloy with Ultrasonic Assistance for Potential Biomedical Applications

Morphology And Wear Resistance Of Composite Coatings Formed On A Ta2 Substrate Using Hot-Dip Aluminising And Micro-Arc Oxidation Technologies

Research Status of Aluminum Base Coating on Titanium Alloy

Application features of microarc oxidation technology

Enhancing Tribological Performance of Micro-Arc Oxidation Coatings on 6061 Aluminum Alloy with h-BN Incorporation

Effects of Micro-arc Oxidation/Multi-arc Ion Plating Composite Treatment on Microstructure and Properties of TC4 Titanium Alloy

Processes and Properties of Self-Lubricating Coatings Fabricated on Light Alloys by Using Micro-Arc Oxidation: A Review

Microstructure, mechanical and tribological properties of high velocity oxy fuel thermal spray coating: A review

Micrographic Properties of Composite Coatings Prepared on TA2 Substrate by Hot-Dipping in Al–Si Alloy and Using Micro-Arc Oxidation Technologies (MAO)

Progress in Research on High Temperature Oxidation Resistance of TiAl Intermetallics