Abstract:Centrifugal spray deposition forming technology, which is used in the preparation process of near-net-forming billets, not only reduces the macroscopic segregation and refines the microstructures of billets but also has the characteristics of a rapid solidification structure. The trajectory, velocity, heat transfer and solidification of metal droplets granulated by the centrifugal force during flight will affect the shape, precision and microstructure of the billet. Therefore, it is necessary to study the dynamics and thermal history of droplets in flight. In this study, a single droplet is taken as the object. Considering the resistance of ambient gas, Newton's second law, classical nucleation theory, Newton's cooling law and the energy conservation equation were used to establish a dynamic model and heat transfer solidification model of liquid metal droplets during flight. The influence of the centrifugal disc speed on the diameter of granulated droplets was analyzed. The variation law of droplet flight trajectory and velocity was explored. The supercooling degree in metal droplet nucleation was quantified, and the influence of droplet diameter, superheat and other factors on heat transfer and solidification was revealed. The results show that the numerical calculation results are basically consistent with the previous research results. The trajectory of the droplet is parabolic during flight. The initial velocity of the droplet, the environmental gas resistance and the convective heat transfer coefficient are positively correlated with the rotating speed of the centrifugal disc; however, the droplet diameter is negatively correlated with the rotating speed of the centrifugal disc. The super cooling degree at the time of droplet nucleation and the flight time required for solidification are negatively correlated with the droplet diameter. Among them, the droplet diameter has a linear relationship with the solidification start time and a quadratic curve relationship with the solidification end time. The effect of superheat on the heat transfer and solidification of droplets is not obvious. The conclusions obtained can provide a theoretical basis for the determination of the preparation process parameters.

Microstructural Characteristics and Heat Transfer of Flattened Millimeter-size Nickel Droplet

Nucleation on Thermal History and Microstructural Evolution of Atomized Ti-48Al Nano and Micro-Powders

Studies of splat morphology and rapid solidification during thermal spraying

Study of splat particle temperature distribution in plasma spray forming

Thermal analysis and measurements for a molten metal drop impacting on a substrate: cooling, solidification and heat transfer coefficient

Effect of Substrate Temperature on the Microstructure and Interface Bonding Formation of Plasma Sprayed Ni20Cr Splat

A numerical study of thermal shrinkage influence on the impact dynamics of alumina droplets thermally sprayed on flat, grit-blasted and laser treated surfaces

Transient Contact Pressure During Flattening of Thermal Spray Droplet and Its Effect on Splat Formation

A Numerical Analysis on the Metal Droplets Impacting and Spreading out on the Substrate

Effect of Molten Particle Temperature on the Bonding Formation During Plasma Spraying of Metal Alloy Coatings

Simulation analysis of splat deposition in plasma spray forming

Flattening and Solidification Behavior of In-Flight Droplets in Plasma Spraying and Micro/macro-Bonding Mechanisms

Experimental Determination of the Interfacial Heat Transfer During Cooling and Solidification of Molten Metal Droplets Impacting on a Metallic Substrate: Effect of Roughness and Superheat

Investigation of Impact and Spreading of Molten Nanosized Gold Droplets on Solid Surfaces.

Numerical Investigation of Substrate Melting and Deformation During Thermal Spray Coating by SPH Method

Effects of Atomization Injection on Nanoparticle Processing in Suspension Plasma Spray

Numerical Investigation of YSZ Droplet Impact on a Heated Wall for Thermal Spray Application

Numerical simulation of nucleation, solidification, and microstructure formation in thermal spraying

Deformation and Solidification Characteristics and Microstructure of Arc Sprayed Ni-Al Composition Coatings

Study on Flight Dynamics and Heat Transfer Solidification of Metal Droplets during Centrifugal Spray Deposition Forming Process

Computational study of the effect of spray parameters on adhesion of splat on the stainless street substrate during the impact of molten zirconia droplet