Abstract:Transition metal carbides with NaCl-structure have long been in focus for the design of hydrogen embrittlement (HE) resistant high strength steels. While previous studies extensively investigated the pure transition metal precipitates, modern steels often contain multiple carbide forming elements at once, leading to the formation of mixed carbonitride precipitates. Since only little is known about the influence of precipitate chemistry on hydrogen trapping, we performed systematic density functional theory (DFT) calculations of disordered structures in order to investigate hydrogen trapping within the (TixV1-x)(CyN1-y) -precipitate system. Addressing possible trapping positions at bulk and interface non-metal vacancies, the coherent interface between (TixV1-x)(CyN1-y) and bcc iron, the strained iron lattice and misfit dislocations, we found that carbon vacancies in TiC, both at the interface and in the bulk, are the deepest hydrogen traps with segregation energies exceeding -1.1 eV. For all investigated positions, a dependence of the hydrogen trapping capability on the precipitate composition has been found, with non-metal vacancies being strongly affected, whereas misfit dislocations and the coherent interface exhibit comparably smaller changes to their hydrogen trapping behavior. With few exceptions, TiC offers the strongest hydrogen traps, while alloying with V or N decreases the hydrogen trapping capability of (TixV1-x)(CyN1-y) -precipitates. This study provides a detailed investigation of a wide range of hydrogen trapping sites related to mixed carbonitride precipitates within the (TixV1-x)(CyN1-y) -system. Our results extend the existing knowledge on hydrogen trapping at pure stoichiometric carbides and nitrides towards alloyed precipitates that help to improve current steel design strategies focusing on the hydrogen trap design.

Hydrogen Trapping and Desorption in a Martensitic Steel with Mixed (ti,mo)c Precipitates

The effect of undissolved and temper-induced (Ti,Mo)C precipitates on hydrogen embrittlement of quenched and tempered Cr-Mo steel

Effect Of Hydrogen On The Very High Cycle Fatigue Properties Of Quenched And Tempered Steels Containing (Ti,Mo)C Precipitates

Quantitative investigation on deep hydrogen trapping in tempered martensitic steel

The finding of hydrogen trapping at phase boundary in austenitic stainless steel by scanning Kelvin probe force microscopy

First-Principles Study of Helium Trapping in Carbide Precipitates (cr23c6) in Ferritic-Martensitic Steels

Microstructures and Hydrogen Storage Properties of Ti10V83-xFe6ZrMnx Alloys

Hydrogen trapping and embrittlement of titanium- and vanadium carbide-containing steels after high-temperature hydrogen charging

Hydrogen Storage Properties and Crystal Structure of Ti-Cr Based Alloys

Hydrogen Storage Properties of Mg+10% TiFe_(1-x)Cr_x(x=0,0.3) Multi-Phase Alloys

Hydrogen trapping in mixed carbonitrides

Studies of hydrogen storage properties and absorption-desorption mechanism of FeTi1.3(Mm)y alloy

Atomic-scale insights on hydrogen trapping and exclusion at incoherent interfaces of nanoprecipitates in martensitic steels

Effect of grain orientation and interface coherency on the hydrogen trapping ability of TiC precipitates in a ferritic steel

Precipitation Behavior and Strengthening Effect of (Ti,Mo)C Particles in a Martensitic Steel

Engineering metal-carbide hydrogen traps in steels

Phase Structures and Hydrogen Storage Properties of TiV1.35Cr1.35-xMnx Alloys(x=0～0.45)

Phase structures and hydrogen storage properties

Microstructure and hydrogen storage properties of Ti10+xV80-xFe6Zr4 (x=0~15) alloys

Hydrogen Storage Behaviors and Microstructure of MF3 (m=ti, Fe)-doped Magnesium Hydride

The Effect of Cr Content on the Structural and Hydrogen Storage Characteristics of Ti10V80−xFe6Zr4Crx (x = 0–14) Alloys