Sugar Dehydration to 5-Hydroxymethylfurfural in Mixtures of Water/[bmim]cl Catalyzed by Iron Sulfate

Xiangbo Song,Chenguang Wang,Lungang Chen,Qiying Liu,Jianguo Liu,Yuting Zhu,Jun Yue,Longlong Ma

DOI: https://doi.org/10.1039/d0nj03433a

IF: 3.3

2020-01-01

New Journal of Chemistry

Abstract:Stabilization effect of [Bmim]Cl on HMF is demonstrated, which can suppress the rehydration and polymerization side-reactions and enhance HMF yield.

What problem does this paper attempt to address?

Experiments and Kinetic Modeling of Fructose Dehydration to 5-Hydroxymethylfurfural with Hydrochloric Acid in Acetone-Water Solvent

Youdi Zhang,Haoxiang Zhu,Zefeng Ji,Youwei Cheng,Liping Zheng,Lijun Wang,Xi Li

DOI: https://doi.org/10.1021/acs.iecr.2c02934

2022-01-01

Industrial & Engineering Chemistry Research

Abstract:This work presents experimental and kinetic modeling studies on fructose dehydration to 5-hydroxymethylfurfural (HMF) in the solution of mixed acetone and water, catalyzed by hydrochloric acid (HCl). A reaction scheme that added an intermediate was proposed. A corresponding kinetic model that considered the parameters, including temperature (383-423 K), initial substrate concentration (10-100 g/L), and catalyst concentration (5-60 mmol/L), was established, and the influence of solvent ratio (3-19) was also studied. The maximum yield was 91% in the ideal plug flow reactor under the optimized condition (T = 383 K, C-F0 = 10 g/L, C-HCl = 10 mmol/L). The model can well support the delicate reactor design since an industrially accessible HMF production process was proposed in this work.
A novel route towards high yield 5-hydroxymethylfurfural from fructose catalyzed by a mixture of Lewis and Brönsted acids

yingxin liu,zhenbin li,yao yang,yaxin hou,zuojun wei

DOI: https://doi.org/10.1039/c4ra04906c

IF: 4.036

2014-01-01

RSC Advances

Abstract:We have developed an effective route for obtaining 5-hydroxymethylfurfural with a yield of 92.6 mol% from the dehydration of fructose in N,N-dimethylformamide using a mixture of AlCl3, H2SO4 and H3PO4 as catalyst. The NMR analysis showed the intermediate formed among fructose, AlCl3 and H3PO4 plays an important role in the novel result.
Novel Dehydration of Carbohydrates to 5-Hydroxymethylfurfural Catalyzed by Ir and Au Chlorides in Ionic Liquids

Zuojun Wei,Yan Li,Dilantha Thushara,Yingxin Liu,Qilong Ren

DOI: https://doi.org/10.1016/j.jtice.2010.10.004

IF: 5.477

2010-01-01

Journal of the Taiwan Institute of Chemical Engineers

Abstract:Catalytic dehydration of carbohydrates into 5-hydroxymethylfurfural (5-HMF) has been studied in the presence of ionic liquids, i.e., 1-butyl-3-methyl imidazolium chloride ([BMIM]Cl) and triethylamine sulphate ([Et3NH][HSO4]) using metal salts as catalysts. Novel metal chlorides IrCl3 and AuCl3·HCl as catalysts in ionic liquid showed remarkable activity and selectivity to 5-HMF for the reaction of fructose dehydration. The reaction conditions of fructose dehydration were optimized as follows: reaction temperature 120°C, reaction time 30min, IrCl3 content 7% (mol% based on fructose) in [BMIM]Cl, at which the conversion of fructose and the yield of 5-HMF reached 97.7% and 89.0%, respectively. By simply assuming the fructose simultaneously converts to 5-HMF and other by-products by the first-order reaction kinetics, the energies of activation are estimated to be 165kJ/mol for the formation of 5-HMF and 124kJ/mol for the formation of other by-products from 80 to 100°C, respectively. The existence of water in the media more than 0.5% (v/v) would significantly slow down the dehydration rate of fructose, while it seemed not necessary to further remove water during the reaction when the water was less than 0.5%. Compared with the dehydration of fructose, the dehydration of other carbohydrates such as glucose, sucrose and maltose was rather difficult.
Conversion of Glucose to 5-Hydroxymethylfurfural in Deep Eutectic Solvent of Choline Chloride–Chromium Chloride

Xusheng Guo,Haoxiang Zhu,Yuxi Si,Xilei Lyu,Youwei Cheng,Liping Zheng,Lijun Wang,Xi Li

DOI: https://doi.org/10.1021/acs.iecr.2c00278

2022-01-01

Industrial & Engineering Chemistry Research

Abstract:5-Hydroxymethylfurfural (HMF) is a crucial biobased compound for synthesizing chemicals and biofuels, but the direct conversion of glucose to HMF suffers low yield and purification problems. In this paper, a cheap and efficient deep eutectic solvent (DES) of choline chloride-chromium chloride (ChCl-CrCl(3)middot6H(2)O) was developed to convert glucose and other carbohydrates to HMF. High HMF yields of 70.2, 78.6, 72.6, and 71.7% were achieved from glucose, fructose, high fructose corn syrup, and sucrose, respectively. The DES ChCl-CrCl(3)middot6H(2)O could be reused nine times without a significant loss of catalytic activity. In addition, a method was developed to regenerate humins-polluted DES. Combined with ultraviolet and visible spectrum data and density functional theory calculation, [Cr(H2O)(2)Cl(3)Ch](+) was identified as the active species in DES ChCl-CrCl(3)middot6H(2)O. This paper proposed a new effective system to convert carbohydrates to HMF. The discovery of active species provides a base for future studies on dehydration mechanisms.
Ultra-Dilute SnCl4-Catalyzed Conversion of Concentrated Glucose to 5-Hydroxymethylfurfural in Aqueous Deep Eutectic Solvent.

Guo Xusheng,Qin Chuan,Si Yuxi,Lyu Xilei,Cheng Youwei

DOI: https://doi.org/10.1002/cssc.202401105

IF: 8.4

2024-01-01

ChemSusChem

Abstract:5-Hydroxymethylfurfural(HMF) is a versatile chemical synthesized from glucose dehydration catalyzed by metal chloride (MClx) in deep eutectic solvents (DESs). However, the low glucose concentration and high catalyst dosage hinder large-scale HMF production. Herein, we report an aqueous DES of tetraethylammonium bromide(TEAB)-glucose for converting concentrated glucose (40 wt %, relative to TEAB) using ultra-dilute SnCl4 (0.25 mol %), achieving a 62 % yield of HMF. Ultra-dilute MClx-catalyzed selective conversion of glucose is feasible only when combining SnCl4 with Br-based DES, which is elucidated by density functional theory and molecular dynamic calculations. Using SnCl4 is essential due to its higher glucose isomerization activity than AlCl3 and CrCl3, which can be attributed to its low-barrier coordination with glucose and its barrier-free separation from fructose. Halide anions in DESs strongly interact with glucose, hindering the MClx-glucose coordination and thereby reducing MClx's activity for glucose isomerization. Consequently, Br-based DESs facilitate higher activity of MClx than Cl-based DESs, due to the weaker interaction between halide anion and glucose. In addition, we elucidated the side reactions including condensation, polymerization, and isomerization, and proposed a reaction network. Our findings clarify the differential activity of MClx and the impact of halide anions in DESs on MClx's activity.
Insight into the dehydration of high-concentration fructose to 5-hydroxymethylfurfural in oxygen-containing polar aprotic solvents

Zuojun Wei,En Yao,Yuran Cheng,Jinbo Hu,Yingxin Liu

DOI: https://doi.org/10.1039/d2nj01339h

IF: 3.3

2022-01-01

New Journal of Chemistry

Abstract:In this study, 1,4-dioxane and tetrahydrofuran are found to be the most suitable solvents for the dehydration of fructose at high concentrations, in which 77.7% and 78.8% yields of 5-hydromethylfurfural (5-HMF) are obtained, respectively, from 20 wt% fructose in the presence of an acid catalyst (5 mol% HCl, 11 wt% water). The high proportion of fructofuranose formed in those polar aprotic solvents and the reversible dimerization to the protective difructose dianhydrides determined by C-13 NMR and HPLC-MS, which stop fructose from excess cross-polymerization into unwanted humins, are considered to be the key factors for the satisfactory 5-HMF yield. Further addition of strong electrophilic molecules such as 5 mol% maleic acid, which consumes 2,5-dioxo-6-hydroxy-hexanal and blocks its reaction with 5-HMF by Michael addition, enhances the yield of 5-HMF to 85.4%.
Insights into Pathways and Solvent Effects of Fructose Dehydration to 5-Hydroxymethylfurfural in Acetone–water Solvent

Haoxiang Zhu,Xusheng Guo,Yuxi Si,Qinrui Du,Youwei Cheng,Lijun Wang,Xi Li

DOI: https://doi.org/10.1016/j.ces.2022.118352

IF: 4.7

2023-01-01

Chemical Engineering Science

Abstract:Preparation of 5-hydroxymethylfurfural (HMF) from fructose is a typical liquid-phase biomass conver-sion reaction, strongly affected by solvent media and acid catalysts, including fructose reactivity and HMF selectivity. Most works on solvent selection were conducted experimentally, however, lack of the-oretical guidance. Herein, we applied experimental and theoretical techniques to investigate solvent effects of acetone-water solvent on HMF production. Factors including product distribution, key interme-diate and byproduct identification, reaction pathways, and solvation simulation of solutes were system-atically evaluated. The results indicate that water ensures high substrate concentration and assists intermolecular hydrogen transfer to accelerate reaction rate. Various HMF degradation reactions are introduced in the presence of water, however, are significantly inhibited by acetone. Moreover, acetone increases the population of high-reactive fructofuranose isomers, thus improving HMF yield. Therefore, water and acetone play a synergistic role in HMF preparation. Also, our findings provide theoretical insights for solvent selection and methodology for studying solvent effects. (c) 2022 Published by Elsevier Ltd.
Influence of inorganic acids on the dehydration of fructose to 5-hydroxymethylfurfural over AlCl3 catalyst

Zhenbin LI,Yunjiang GU,Wei WANG,Zuojun WEI,Yingxin LIU

DOI: https://doi.org/10.3969/j.issn.1008-1143.2014.08.005

2014-01-01

Abstract:The dehydration of fructose to 5-hydroxymethylfurfural is the research hotspot of the compre-hensive utilization of biomass resources. Using AlCl3 as the catalyst,the influence of reaction conditions on the dehydration of fructose to 5-hydroxymethylfurfural,especially the addition of different inorganic acids on the catalytic performance of AlCl3 was investigated. Using inorganic acid and AlCl3 as the co-catalyst, the effects of different solvents(1,4-dioxane,N,N-dimethylformamide,2-dimethyl sulfoxide),reaction temperature and the mass ratio of sulphuric acid to phosphoric acid(1: 2、2: 3、3: 2、2: 1)were tested. The results showed that 5-hydroxymethylfurfural yield of 92. 1% was attained under the condition as follows:N,N-dimethylformamide as the solvent,AlCl3 dosage 7. 5 mmol,sulphuric acid concentration 20 mmol·L -1 , phosphoric acid concentration 30 mmol·L - 1 and reaction temperature 120 ℃.
Highly Efficient and Selective Preparation of 5-Hydroxymethylfurfural from Concentrated Carbohydrates Using Deep Eutectic Solvents

Xusheng Guo,Haoxiang Zhu,Yuxi Si,Heng Ban,Xilei Lv,Youwei Cheng,Lijun Wang,Xi Li

DOI: https://doi.org/10.1021/acssuschemeng.2c04486

IF: 8.4

2022-01-01

ACS Sustainable Chemistry & Engineering

Abstract:Converting carbohydrates to 5-hydroxymethylfurfural (HMF) is an important goal for biorefinery. Although various deep eutectic solvents (DESs) have been reported for HMF production, the field lacks systematic research on the effect of cations and anions and an effective catalytic system for converting concentrated carbohydrates. Here, 12 kinds of DESs containing four cations and six anions were systematically evaluated and tetraethylammonium bromide (TEAB) was confirmed as the most effective DES, which provided HMF yields of 90 and 76% from fructose and glucose, respectively. The stable bromide-substituted intermediate may explain the positive effect of bromide based on the results of density functional theory calculation. A high concentration substrate has an adverse impact on the selectivity of HMF due to the HMF concentration caused by glucose, CrCl3.6H(2)O, and concentrated HMF. To inhibit the condensation, a biphasic system of TEAB/THF is developed to convert a highly concentrated glucose of 62.5 wt % (83.3 wt % with respect to TEAB), providing an excellent HMF yield of 72%. This study has revealed the impact of cations and anions of DESs on HMF production, which will serve as a base for designing taskspecific DESs. Moreover, an efficient catalytic system to produce HMF from concentrated glucose was also provided.
Mechanistic Understanding of Humin Formation in the Conversion of Glucose and Fructose to 5-Hydroxymethylfurfural in [bmim]cl Ionic Liquid.

Zhanwei Xu,Yiwen Yang,Peifang Yan,Zhi Xia,Xuebin Liu,Z. Conrad Zhang

DOI: https://doi.org/10.1039/d0ra05641c

IF: 4.036

2020-01-01

RSC Advances

Abstract:Humin formation is one of the key issues that hinders economical 5-HMF production from hexose sugars such as glucose and fructose. In this work, the mechanism of humin formation in glucose/fructose conversion to HMF was studied in an ionic liquid system (1-butyl-3-methylimidazolium chloride, [BMIM]Cl) with CrCl3 as the catalyst. Elemental analysis, XRD, FT-IR, and TEM were applied to study the molecular structure and morphology of the solid humins. The possible intermediates to form solid humins were investigated by HPLC-MS. We synthesized furanic model compounds that mimic the experimentally identified humin intermediates to investigate the mechanism of humin growth at an early stage. The results showed that a furan compound bearing a hydroxymethyl and an electron-donating group was unstable due to three types of reactions: (1) bimolecular ether formation reactions; (2) intermolecular addition reaction; (3) furan ring opening reaction with water. The stability of a furan compound in [BMIM]Cl was increased when the hydroxymethyl group of a furan compound was protected by a methyl group, and the stability was further enhanced with an additional electron-withdrawing group (such as an aldehyde group) on the furan ring. Protecting the hydroxymethyl group of 5-HMF with a methyl group allows easy separation of the products from the [BMIM]Cl solvent through extraction.
Selective 5-hydroxymethylfurfural production from cellulose formate in DMSO-H<sub>2</sub>O media

Caidi Jin,Ning Xiang,Xiao Zhu,E. Shuang,Kuichuan Sheng,Ximing Zhang

DOI: https://doi.org/10.1016/j.apcatb.2020.119799

2021-01-01

Abstract:5-hydroxymethylfurfural (HMF) can be widely converted into value-added chemicals and fuels production. Herein, we reported a sustainable and efficient approach for synthesizing HMF directly from cellulose. Facile formylation of cellulose with green and recyclable formic acid was developed for cellulose formate (CF) production. CF with special net-like structure and high degree of formyl substitution was prepared. The resultant CF exhibited excellent catalytic conversion and selectivity for HMF production comparable to monomeric glucose as reactant in dimethyl sulfoxide (DMSO)-H2O media. In our work, we presented molecular dynamics simulations to elaborate the preferential coordination of DMSO around formyl group, which promoted the solvation of formylated substrate in DMSO-H2O mixture, and the HMF yielded could be protected by DMSO without further degradation to levulinic acid or humins.
Highly Efficient Production of 5-Methoxymethylfurfural from Fructose in Dimethyl Sulfoxide/Amberlyst-15 Catalytic System

Hui Yang,Feng Zhou,Hao Chen,Jing Li,Huixia Ma,Kequan Chen,Xiuyang Lu,Pingkai Ouyang,Jie Fu

DOI: https://doi.org/10.1021/acs.iecr.9b06392

2020-01-01

Industrial & Engineering Chemistry Research

Abstract:With the dwindling availability of fossil fuel resources and the dramatic increase in demand, 5-methoxymethylfurfural (MMF) obtained from renewable biomass resources has great potential as a fossil fuel alternative. In this work, a high yield (80.5%) of MMF was obtained from fructose catalyzed by Amberlyst-15 with the assistance of dimethyl sulfoxide (DMSO) in methanol at 100 degrees C for 10 h. Based on a detailed investigation of the reaction mechanism through the effects of DMSO, Amberlyst-15, reaction time, and reaction temperature on MMF yield and the existence of intermediates proved by FTIR, a two-step pathway was proposed: (1) DMSO and H ion on Amberlyst-15 act as a joint-catalyst [DMSOH](+), facilitating the dehydration of fructose into 5-hydroxymethylfurfural (HMF), and (2) [DMSOH](+) assists the etherification of HMF with methanol into MMF, which is the rate-determining step. This finding expands the concept of biomass conversion into biomass fuels and plays a vital role in catalyst screen and design, reaction medium selection, and industrial applications.
Dehydration of Fructose to 5-Hydroxymethylfurfural over a Mesoporous Sulfonated High-Crosslinked Polymer in Different Solvents

Boyong Ye,Wenyang Zhang,Ruru Zhou,Yuanyuan Jiang,Zixin Zhong,Zhaoyin Hou

DOI: https://doi.org/10.2139/ssrn.3954422

2021-01-01

Abstract:SHCP was active and stable for dehydration of fructose to 5-HMF in DIO/H 2 O as H 2 O depressed oligomerization of 5-HMF.
5-Hydroxymethylfurfural and levulinic acid derived from monosaccharides dehydration promoted by InCl3 in aqueous medium

Yue Shen,Jiankui Sun,Yuxuan Yi,Bo Wang,Feng Xu,Runcang Sun

DOI: https://doi.org/10.1016/j.molcata.2014.07.007

2014-01-01

Abstract:•InCl3 presented a remarkable catalytic effect on the dehydration of monosaccharides into 5-HMF and LA.•Fructose has the faster conversion to 5-HMF, and relatively more LA was obtained using glucose.•The isomerization from glucose to fructose was easier than the reversible process.
Preparation of 5-Hydroxymethylfurfural by Dehydration of Carbohydrates

Li Yan,Wei Zuojun,Chen Chuanjie,Liu Yingxin

2010-01-01

Progress in chemistry

Abstract:In this article, the recent research progress in the dehydration of carbohydrates for preparation of 5-hydroxymethylfurfural (5-HMF) is summarized, including dehydration mechanism and product distribution, catalysts and solvents used, the separation of 5-HMF, as well as a brief prospective on this research field. At present, the most effective catalyst is CrCl2/[EMIM] system, but separation of the 5-HMF product is worthy to be concerned, especially the separation of 5-HMF from ionic liquid medium to make the latter reused.
Superior Salting‐Out of MgSO4 to Improve the Synthesis of 5‐Hydroxymethylfurfural

Zhi Cao,Chao Liu,Haitao Cao,Zhongxiang Fan,Yixiang Shi,Tao Shen

DOI: https://doi.org/10.1002/slct.202403221

2024-12-05

ChemistrySelect

Abstract:In this publication, MgSO4 is first used as a salt additive to promote HMF production. An unprecedented salting‐out effect of MgSO4 on HMF is achieved in MgSO4‐H2O/THF (R = 30.48) and MgSO4‐ChCl‐H2O/THF (R = 10.84). An optimum HMF yield of 78.1% is produced from glucose, and higher than 95.0% HMF produced is partitioned into the THF phase since the strong salting‐out effect of MgSO4. The effect of salts on the 5‐hydroxymethylfurfural (HMF) synthesis over the catalyst of AlCl3‐HCl was investigated. An unprecedented R (distribution coefficient) value of 30.48 was achieved in the H2O/THF system when MgSO4 was used as a salting‐out agent. Results indicated that the excellent salting‐out effect of MgSO4 on HMF was attributed to the synergistic effect of Mg2+ and SO42−. MgSO4 showed more efficiency on the HMF synthesis than other salts in the ChCl‐H2O/THF biphasic system. A 78.1% yield of HMF was achieved from glucose under optimal conditions, and higher than 95.0% of the produced HMF was partitioned into the organic phase due to the excellent salting‐out effect of MgSO4. During the recyclability of the aqueous phase, a remarkably high yield of HMF (78.0%) and conversion of glucose (93.8%) were achieved even after 10 cycles. The MgSO4 also showed efficiency to improve the synthesis of HMF from other sugars. Finally, the salting‐out effect of MgSO4 on sugar dehydration was investigated in other biphasic systems, and the yield of HMF showed an obvious increase compared with the literature reports.

chemistry, multidisciplinary
Catalytic Conversion of Fructose to 5-Hydroxymethylfurfural by a Novel Sulfonated Carbonaceous Material

Li-feng LI,Zhong-quan SHEN,Cen-yi LI,Ji-zhong CHEN

DOI: https://doi.org/10.3969/j.issn.1003-9015.2016.06.015

2016-01-01

Abstract:A novel sulfonated carbonaceous material was prepared through carbonization and sulfonation of a melamine formaldehyde resin, which was characterized by Fourier transform infrared spectroscopy (FTIR), Scanning electron microscope (SEM), BET, Thermogravimetric analysis (TGA), elemental analysis and acidity measurement. The prepared sulfonated carbonaceous material was used to catalyze fructose dehydration to prepare 5-hydroxymethylfurfural (5-HMF), and the effects of solvents, catalyst dosage, reaction temperature, reaction time and fructose concentration on 5-HMF yield were investigated. The results show that 5-HMF yield of 79.8%could be obtained in dimethyl sulfoxide (DMSO) under the following optimum reaction conditions:the catalyst dosage is 5% of fructose input, reaction temperature 180℃, reaction time 30 min and fructose concentration 0.025 g×mL-1. 5-HMF yield only decreased 7.1% after the catalyst was reused for five times, which indicates good reusability of the catalyst.
Coordination of Acidic Deep Eutectic Solvent–Chromium Trichloride Catalytic System for Efficient Synthesis of Fructose to 5-Hydroxymethylfurfual

Qingyin Li,Kai Sun,Yuewen Shao,Shu Zhang,Zifeng Yan,Lijun Zhang,Qing Liu,Yi Wang,Xun Hu

DOI: https://doi.org/10.1021/acs.iecr.0c01218

2020-01-01

Industrial & Engineering Chemistry Research

Abstract:Development of an eco-friendly and effective reaction system for production of platform chemicals like 5-hydroxymethylfurfural (HMF) has always been a hot topic in biorefineries. In this study, the acidic deep eutectic solvents (DESs) coupled with chromium chloride (CrCl3) have been developed for effective conversion of fructose to HMF under a microwave-assisted manner. The acidic DES was composed of an organic acid and choline chloride (ChCl). Among the organic acids screened, the ChCl-HCOOH system was found to be the most effective medium for the HMF production, which was attributed to the smaller molecular structure and stronger acidity. Such an observation was also consistent with the larger interaction potential energy between fructose and ChCl-HCOOH obtained from the Monte Carlo simulation. In addition, a synergistic effect achieved from the ChCl-HCOOH/CrCl3 mixture played a vital role on the formation of HMF. The ChCl-HCOOH/CrCl3 system could be reutilized without remarkable change in HMF yield, indicating the advantages of ease of recovery and high catalytic stability.
Conversion of Glucose into 5-Hydroxymethylfurfural Catalyzed by Acid–base Bifunctional Heteropolyacid-Based Ionic Hybrids

Pingping Zhao,Yunyun Zhang,Yong Wang,Hongyou Cui,Feng Song,Xiuyu Sun,Lipeng Zhang

DOI: https://doi.org/10.1039/c7gc03821f

IF: 9.8

2018-01-01

Green Chemistry

Abstract:Acid–base bifunctional ionic hybrids were employed as catalysts for glucose dehydration to HMF via a unique sequential hydrogen transfer route.
Conversion of Glucose to 5-Hydroxymethylfurfural at High Substrate Loading: Effect of Catalyst and Solvent on the Stability of 5-Hydroxymethylfurfural

Chuanyunlong Bai,Qidong Hou,Xinyu Bai,Yifan Nie,Hengli Qan,Meinan Zhen,Meiting Ju

DOI: https://doi.org/10.1021/acs.energyfuels.0c03078

IF: 4.6541

2020-01-01

Energy & Fuels

Abstract:Reaction efficiencies of biorefinery processes are universally low because of the severe side reactions at high substrate loading. Here, we show that the use of Sn-modified Al2O3 catalyst in ionic liquid EMIMBr enables the efficient conversion of glucose to 5-hydroxymethylfurfural (HMF) at substrate loading up to 35 wt %, with the HMF production rate exceeding that of the previous reported catalytic systems. The introduction of a small quantity of Sn species to Al2O3 could improve their Lewis acid amount and surface area but not result in the increase of Brmnsted acid and base density, beneficial for the glucose isomerization into fructose with reduced degradation of HMF catalyzed by Bronsted acid. Moreover, the ionic liquid EMIMBr and the deposition of humins on the catalyst play important roles for the stabilization of HMF under the evaluated temperature. The superior reaction efficiency is attributed to the cooperation action of the heterogenous catalyst with EMIMBr.

Sugar Dehydration to 5-Hydroxymethylfurfural in Mixtures of Water/[bmim]cl Catalyzed by Iron Sulfate

Experiments and Kinetic Modeling of Fructose Dehydration to 5-Hydroxymethylfurfural with Hydrochloric Acid in Acetone-Water Solvent

A novel route towards high yield 5-hydroxymethylfurfural from fructose catalyzed by a mixture of Lewis and Brönsted acids

Novel Dehydration of Carbohydrates to 5-Hydroxymethylfurfural Catalyzed by Ir and Au Chlorides in Ionic Liquids

Conversion of Glucose to 5-Hydroxymethylfurfural in Deep Eutectic Solvent of Choline Chloride–Chromium Chloride

Ultra-Dilute SnCl4-Catalyzed Conversion of Concentrated Glucose to 5-Hydroxymethylfurfural in Aqueous Deep Eutectic Solvent.

Insight into the dehydration of high-concentration fructose to 5-hydroxymethylfurfural in oxygen-containing polar aprotic solvents

Insights into Pathways and Solvent Effects of Fructose Dehydration to 5-Hydroxymethylfurfural in Acetone–water Solvent

Influence of inorganic acids on the dehydration of fructose to 5-hydroxymethylfurfural over AlCl3 catalyst

Highly Efficient and Selective Preparation of 5-Hydroxymethylfurfural from Concentrated Carbohydrates Using Deep Eutectic Solvents

Mechanistic Understanding of Humin Formation in the Conversion of Glucose and Fructose to 5-Hydroxymethylfurfural in [bmim]cl Ionic Liquid.

Selective 5-hydroxymethylfurfural production from cellulose formate in DMSO-H<sub>2</sub>O media

Highly Efficient Production of 5-Methoxymethylfurfural from Fructose in Dimethyl Sulfoxide/Amberlyst-15 Catalytic System

Dehydration of Fructose to 5-Hydroxymethylfurfural over a Mesoporous Sulfonated High-Crosslinked Polymer in Different Solvents

5-Hydroxymethylfurfural and levulinic acid derived from monosaccharides dehydration promoted by InCl3 in aqueous medium

Preparation of 5-Hydroxymethylfurfural by Dehydration of Carbohydrates

Superior Salting‐Out of MgSO4 to Improve the Synthesis of 5‐Hydroxymethylfurfural

Catalytic Conversion of Fructose to 5-Hydroxymethylfurfural by a Novel Sulfonated Carbonaceous Material

Coordination of Acidic Deep Eutectic Solvent–Chromium Trichloride Catalytic System for Efficient Synthesis of Fructose to 5-Hydroxymethylfurfual

Conversion of Glucose into 5-Hydroxymethylfurfural Catalyzed by Acid–base Bifunctional Heteropolyacid-Based Ionic Hybrids

Conversion of Glucose to 5-Hydroxymethylfurfural at High Substrate Loading: Effect of Catalyst and Solvent on the Stability of 5-Hydroxymethylfurfural