Abstract:A Taylor–Couette (TC) reactor has been considered as a promising technology to produce uniform ultra-fine particles with controlled morphology and size because of its rather narrow shear rate distribution in comparison to a conventional stirred tank. However, small particles in the TC reactor are likely entrapped by the Taylor vortices and concentrated more in the core of the vortices, thus having an adverse or a positive impact on producing the uniformly fine particles. To mitigate this disadvantage, one approach is to adopt an inner cylinder with a variable cross-section through the proper design to obtain a non-constant gap between the inner and outer cylinders in the TC reactor. This study investigates the use of specific profiles of the cross section for the inner cylinder to deform the Taylor vortices, effectively reducing the regions of low velocity and shear rate in the TC reactor. The profiles are composed of a series of curves. The flow patterns and shear rate distributions in the modified TC reactors were investigated using CFD modelling. The sliding mesh method and the Reynolds stress model were employed in the simulation to account for highly turbulent rotating flows. The simulated results compared with those for the classical TC reactor clearly indicate that the regions of low shear rate are effectively reduced in the modified TC reactors because the Taylor vortices occurring in the gap becomes temporal-periodic with respect to the stationary outer cylinder. The obtained shear rate distributions are remarkably narrower than those of the classical TC reactor. It was revealed that the curvature of curves for the cross-section profiles can significantly affect the shear rate distributions, and there exists an optimal profile for the inner cylinder cross-section.

Experimental and Computational Investigation of Mixing and Separation Performance in a Liquid–Liquid Cyclone Reactor

Hydrodynamics in a Novel Gas-Liquid Cocurrent Bubble Reactor and its CFD Simulation

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

Effect of hydrodynamic heterogeneity on particle dispersion in a Taylor-Couette flow reactor with variable configurations of inner cylinder

Computational Fluid Dynamics Simulations and Experimental Validation of Macromixing and Flow Characteristics in Low-Density Polyethylene Autoclave Reactors

Effect of Hydrodynamic Heterogeneity on Micromixing Intensification in a Taylor–Couette Flow Reactor with Variable Configurations of Inner Cylinder

CFD Simulation of Shear Flow and Mixing in a Taylor–Couette Reactor with Variable Cross-Section Inner Cylinders

Using CFD and Machine Learning to Explore Chaotic Mixing in Laminar Diameter-Transformed Stirred Tanks

Experimental and Numerical Study on Flow Resistance and Bubble Transport in a Helical Static Mixer

Cold model investigation of mixing-separation time distribution in a multi-element process coupled cyclone reactor for ionic liquid-catalyzed isobutane/butene alkylation

Oil/Water Separation in a Liquid-Liquid Cylindrical Cyclone

Experimental investigation on separation characteristics of axial cyclone separator

Numerical analysis of a novel cascading gas-liquid cyclone separator

Experimental Approaches for Understanding Mixing Performance of A Minireactor

Design and simulation of an efficient gas-liquid separation device for component regulation of zeotropic mixtures

Hydrodynamics and mass transfer in a slurry external airlift loop reactor integrating mixing and separation

Investigation of hydrodynamics and mass transfer in an internal loop airlift slurry reactor integrating mixing and separation

Gas-liquid Mixing Performance, Power Consumption, and Local Void Fraction Distribution in Stirred Tank Reactors with a Rigid-Flexile Impeller

Impacts of solid physical properties on the performances of a slurry external airlift loop reactor integrating mixing and separation

Numerical investigation of separation efficiency of the cyclone with supercritical fluid–solid flow