Abstract:Low-temperature-initiated cracking technology has significant potential to develop new hydrocarbon pyrolysis with better atomic economy and higher yields of light olefins. The impacts of three representative initiators, triethylamine (TEA), nitromethane (NM), and di-tert-butyl peroxide (DTBP), were compared. Sufficiently detailed co-cracking reaction networks of three initiators with n-hexane were obtained through an automatic reaction network generator RMG, and the corresponding steam cracking tubular reactor simulation was performed. The results showed that the initiator with a lower cracking temperature brought about a more noticeable decrease in the cracking temperature of n-hexane. Both TEA and NM increased the carbon atom conversion from n-hexane to ethylene and propylene, especially propylene. NM was more significant, while DTBP was almost ineffective. Through kinetic parameter analysis, it was found that the temperature dependence of the key reaction caused different initiator performance. NM completely cracked at an appropriate temperature where the rate constants of the hydrogen abstraction and ethylene generation had reached a high level, and the released free radicals were effective. Visual reaction network analysis revealed that NM had a strong ability to release free radicals, and these free radicals significantly adjusted the competitive reaction path to produce ethylene and propylene, resulting in the most obvious effect on improving the conversion of n-hexane and the yield of propylene. The action laws of NM described above under hydrocarbon pyrolysis conditions indicate that NM may be the most suitable initiator for low-temperature-initiated cracking of hydrocarbons among these three initiator types.

Study on Thermodynamics of Butene Catalytic Cracking to Propene and Ethene

Low-Temperature-Initiated Cracking of Hydrocarbons to Produce Olefins: Simulation and Comparison of Different Initiators

Study on Production of Propylene from C4 Olefins by Catalytic Cracking

Catalytic conversion of C4 fraction for the production of light olefins and aromatics

The Mechanism and Kinetic Analysis of C4h4 + C4h4 (But-1-ene-3-yne) Reaction with Features of H-Transfer in Combustion

THERMODYNAMICS ANALYSIS AND REACTION PERFORMANCE OF THE PRODUCTION OF PROPYLENE AND ETHYLENE FROM C4OLEFINS CRACKING

THERMODYNAMICS ON COUPLED CONVERSION OF BUTENE AND METHANOL TO ETHYLENE AND PROPYLENE

Kinetics of Coupling Cracking of Butene and Pentene on Modified HZSM-5 Catalyst

Catalytic Cracking of Butene to Ethylene and Propylene over SAPO 34 Molecular Sieves

Catalytic Cracking of 1-Butene to Propylene by Ag Modified HZSM-5

A Two-Layer ONIOM Study on Initial Reactions of Catalytic Cracking of 1-Butene To Produce Propene and Ethene over HZSM-5 and HFAU Zeolites

Effects of operational conditions on butene oligomerization over HZSM-5

Effect of Different Ligands on the Preparation of Pt-xMn@HZSM-5 and Their Catalytic Performance for Iso-Butane Catalytic Cracking

Effects of post treatment of HZSM-5 zeolites on catalytic cracking of butene

High Selectivity Production of Propylene from N -Butene: Thermodynamic and Experimental Study Using a Shape Selective Zeolite Catalyst

Effects of Steam Treatment on Acidity of Zsm-5 and Its Catalytic Performance in Butene Cracking

Catalytic cracking of C4 alkenes to propene and ethene: Influences of zeolites pore structures and Si/Al2 ratios

Study on Catalytic Cracking Reaction of Alkanes with Different Structures

Catalytic cracking of 1-butene to propene and ethene on MCM-22 zeolite

Insight into Reaction Path and Mechanism of Catalytic Cracking of N-Hexane in HZSM-5 Zeolites

Kinetics of Liquid-Phase 1-Butene Hydroisomerization over Pd/Al2O3 Catalysts