Abstract:The use of nanoscale heterostructures is an effective approach for developing catalysts that are free of precious metals for sustainable energy conversion. In this study, a sequenced successive ionic layer adsorption and reaction (sequenced-SILAR) method was developed for the fabrication of Ni(OH)2/FeOOH heterostructures. In this method, the order of the deposition cycles of individual Ni(OH)2 and FeOOH layers was programmed to control the thickness and stacking order of these layers in the heterostructure. The sequenced-SILAR process using an Fe2+ solution as the iron source produced dense heterojunctions offering overpotentials of 330 and 234 mV at 10 mA cm–2 for an oxygen evolution reaction (OER) on a flat, conducting oxide substrate and porous Ni foam, respectively. Investigation of the deposition-sequence-dependent OER activity indicated that the Ni(OH)2/FeOOH coupling effects may extend to the Ni2+ active sites located about 10 nm from the heterointerface. When an Fe3+ precursor was employed in the sequenced-SILAR process, dense heterojunctions were not produced because of the formation of isolated FeOOH particles. As a result, an excellent overpotential was not obtained. In principle, the sequenced-SILAR method can be extended to the fabrication of various types of heterostructures. However, the deposition conditions must be carefully designed to offer strong interfacial coupling effects.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01505.Additional experimental results, including XRD, AFM, XPS, and OER-polarization data, photographs of SILAR-derived films, and overpotential values summarized based on the current and previous studies (PDF)This article has not yet been cited by other publications.

Preparation of Perovskite Type Lanthanum Niobates Catalyst with Porous Layers

The preparation of an elastomer/silicate layer nanocompound with an exfoliated structure and a strong ionic interfacial interaction by utilizing an elastomer latex containing pyridine groups.

A Very Thin Layer of NiO, Ni(OH)2 Nanosheets Arrays with Organic Functional Modification of Polyaniline

Synthesis and characterization of titania-pillared layered HLaNb2O7 with high specific surface area

Preparation and characterization of a silica-pillared layered lanthanum titanate

Modification of the interlayer in K[Ca2Nan−3NbnO3n+1] and their photocatalytic performance for water cleavage

Synthesis Of Titania-Pillared Layered Niobic Acid With A High Specific Surface Area By Using Sol-Intercalation Method

Synthesis and Characterization of Porous Chromia-Pillared Layered Lanthanum Niobic Acid

First Synthesis of Zirconia-pillared Layered Lanthanum Niobate

Preparation and Conducting Performance of Lanio3 Thin Film on Si Substrate

Preparation and characterization of silica-pillared layered titanate

Constructing LaNiO3/NiO heterostructure via selective dissolution of A-site cations from La1−xSrxNiO3 for promoting oxygen evolution reaction

Properties and Bifunctional Catalytic Activity of Niobium-Doped Silica-Titania: Effect of Phosphoric Acid Treatment

Perovskite Hollow Nanospheres for the Catalytic Wet Air Oxidation of Lignin

In Situ Growth Synthesis of Heterostructured LnPO4–SiO2 (ln = La, Ce, and Eu) Mesoporous Materials As Supports for Small Gold Particles Used in Catalytic CO Oxidation

Preparation Of Thermostable Silica-Pillared Layered Niobic Acids With Different Interlayer Distance, Surface Area And Pore Size

The First Silica-Pillared Layered Niobate

Sequenced Successive Ionic Layer Adsorption and Reaction for Rational Design of Ni(OH) 2 /FeOOH Heterostructures with Tailored Catalytic Properties

Preparation and Characterization of Tio2-Pillared Layered Hnb3o8

Preparation and characterization of lanthanum-doped pillared clays

Controlling the Cation Exsolution of Perovskite to Customize Heterostructure Active Site for Oxygen Evolution Reaction.