Abstract:The all-inorganic cesium lead bromide (CsPbBr3) perovskite solar cells (PSCs) have attracted considerable interest because of their outstanding environmental stability and low manufacturing cost. However, the state-of-the-art mesoscopic titanium dioxide (TiO2) electron-transporting layers (ETLs) always present low electron mobility, are destructive to perovskites under ultraviolet light illumination, as well as possess high sintering temperature. Nanostructured tin dioxide (SnO2) is a promising electron-transporting material for high-efficiency PSCs due to matching energy-level alignment with the perovskite layer, improved optical transparency, high electron mobility, excellent photostability, and low-temperature processing. Furthermore, rapid but poorly controlled perovskite crystallization makes it difficult to scale up planar PSCs for industrial applications. To address this issue, we adopt a dimensional SnO2 ETL to change the surface wettability for uniform perovskite coverage over large areas and the growth of large-sized CsPbBr3 grains, resulting in a maximum grain size of 1.65 μm. Moreover, the dimensional SnO2 ETL could increase the interfacial contact area between the CsPbBr3 layer and the ETL and enhance the electronic contact for efficient electron extraction to suppress or to eliminate the notorious hysteresis behavior. As expected, a power conversion efficiency (PCE) of 9.51% with an almost hysteresis-free phenomenon is achieved through dimensionality control of SnO2 films attributed to the remarkably enhanced light harvesting, accelerated electron extraction, diminished defect density, and reduced charge recombination. Upon further interfacial modification with graphene quantum dots (GQDs), the PSC based on the two-dimensional SnO2 ETL achieves a champion PCE of 10.34% due to the improved energy-level alignment at the device interface. Moreover, the best all-inorganic CsPbBr3 PSC free of encapsulation retains 93% of initial efficiency over 10 days at 80% relative humidity. This work provides an effective dimensionality control strategy for optimized charge transportation and enlarged perovskite grain size to make stable and efficient all-inorganic CsPbBr3 PSCs.

A universal method for hysteresis-free and stable perovskite solar cells using water pre-treatment

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

Water-Soluble Polymeric Interfacial Material for Planar Perovskite Solar Cells.

Simultaneous Passivation of the SnO2/Perovskite Interface and Perovskite Absorber Layer in Perovskite Solar Cells Using KF Surface Treatment

Controlling Water for Enhanced Homogeneities in Perovskite Solar Cells with Remarkable Reproducibility

High-effective SnO2-based perovskite solar cells by multifunctional molecular additive engineering

Electrochemical Reduction and Ion Injection of Annealing‐Free SnO2 for High Performance Perovskite Solar Cells

Improved SnO2 Electron Transport Layers Solution‐Deposited at Near Room Temperature for Rigid or Flexible Perovskite Solar Cells with High Efficiencies

Carboxymethyldextran sodium-modified SnO2 enables highly efficient and stable perovskite solar cells with a high fill factor of 84.89%

Polyelectrolyte-Doped SnO<sub>2</sub> as a Tunable Electron Transport Layer for High-Efficiency and Stable Perovskite Solar Cells

Simultaneous Passivation of the SnO 2 /Perovskite Interface and Perovskite Absorber Layer in Perovskite Solar Cells Using KF Surface Treatment

Synergistic Passivation Strategies for Enhancing Efficiency and Stability of Perovskite Solar Cells

Precisely Controlled Hydration Water for Performance Improvement of Organic–Inorganic Perovskite Solar Cells

High-Performance Perovskite Solar Cells with Low Open-Circuit Voltage Loss and Excellent Stability after p-F-PEAI Posttreatment

Dimensionality Control of SnO2 Films for Hysteresis-Free, All-Inorganic CsPbBr3 Perovskite Solar Cells with Efficiency Exceeding 10

Antisolvents Treatment of Cs 0.15 FA 0.85 PbI 3 Boosting Efficiency for Perovskite Solar Cells

Tuning Perovskite Surface Polarity via Dipole Moment Engineering for Efficient Hole-Transport-Layer-Free Sn-Pb Mixed-Perovskite Solar Cells

Interfacial Dipole Poly(2-ethyl-2-oxazoline) Modification Triggers Simultaneous Band Alignment and Passivation for Air-Stable Perovskite Solar Cells

Ethyl Thioglycolate Assisted Multifunctional Surface Modulation for Efficient and Stable Inverted Perovskite Solar Cells

Improving Crystallization and Stability of Perovskite Solar Cells Using a Low-Temperature Treated A-Site Cation Solution in the Sequential Deposition

The Stable Perovskite Solar Cell Prepared by Rapidly Annealing Perovskite Film with Water Additive in Ambient Air