Abstract:The effect of heat treatments on bulk poly-crystalline La 0.67 Ca 0.33 MnO 3 perovskite manganite is presented, to explore the possible enhancement in magnetocaloric performance. Samples were prepared via conventional solid-state reaction route with annealing and sintering at various temperatures. Detailed measurements of temperature-dependent and field-dependent magnetization were carried out to estimate the Curie point and order of magnetic transition. The increased sintering temperature results in a steep transition near the T C , and establishes the magnetic sensitivity as well as the active zone for substantial magnetocaloric performance, at about 168.2% for the LCM9 (sintered at 900 °C) sample. The cause for the significant improvement in the magnetic and magnetocaloric response is brought to light using detailed X-ray photoelectron spectroscopy (XPS) analysis, highlighting the role of oxygen in modifying the Mn 3+ /Mn 4+ charge ratio. The maximum value of the isothermal magnetic entropy change for the optimized sample is found to be 6.4 J kg −1 K −1 , achieved at 269 K, while temperature-averaged entropy change (TEC) values, TEC(Δ T H–C = 3 K) and TEC(Δ T H–C = 5 K), of 6 J kg −1 K −1 and 5.2 J kg −1 K −1 , respectively, were obtained with a low magnetic field change of 20 kOe. The obtained isothermal entropy change at low field for the optimized La 0.67 Ca 0.33 MnO 3 sample is higher than that of pure Gd and most oxide-based materials. The relative cooling power (RCP) value is around 93 J kg −1 (Δ H = 20 kOe). The order of the phase transition is examined with universal scaling; the scaled entropy change curves confirm the collapse onto a single curve for LCM9, asserting second-order character, whereas the breakdown of the curve with a dispersion relation ( d ) of 101.1% at Θ = −5 confirms the onset of intrinsic first-order nature in the case of the high-temperature-sintered samples. Calorimetry measurements show thermal hysteresis of 2.4 K and 7.1 K for LCM11 (sintered at 1100 °C) at ramp rates of 5 K min −1 and 10 K min −1 , respectively, confirming the first-order nature of the magnetic transition.

Effect of Sintering Temperature on Structural and Electrical Transport Properties of La0.7Ca0.28K0.02MnO3 Ceramics

Improvement of Electromagnetic Properties at Room Temperature in La0.625Ca0.375-Sr MnO3:Ag0.2 (x = 0.09–0.15) Ceramics by Sr Doping

Improvement in electronic and magnetic transport of La0.67Ca0.33MnO3 manganites by optimizing sintering temperature

Obtained Large Room-Temperature TCR of La0.67Ca0.25Sr0.08MnO3 Ceramics by Optimizing Sintering Temperature

Optimization of the electrical transport properties of La0.7Ca0.3MnO3 films by sintering temperature adjustment

TCR and MR room-temperature enhancing mechanism of La0.7K0.3−Sr MnO3 ceramics for uncooling infrared bolometers and magnetic sensor devices

Optimized electrical transport properties of La0.7Ca0.18Sr0.12MnO3 film by adjusting sintering temperature

HE ELECTICAL-RANSPORT PROPERTIES OF THE MO-DOPING La0.7Ca0.2Ba0.1Mn1-xMoxO3

A-site K-doping to enhance room-temperature TCR of polycrystalline La0.8Sr0.2-K MnO3 ceramics

Effect of Sintering Process on the Physical Properties of La_(0. 67)Ca_(0. 33)MnO_3 Polycrystal

Changing the Ca2+ ion ratio to modulate the temperature coefficient of resistivity (TCR) of La1-Ca MnO3 films prepared by the sol-gel spin coating method

Structural, magnetic, magnetocaloric, investigations on La0.8−xKxSr0.2Mn0.95Ni0.05O3 (x = 0.05, 0.10 and 0.15) at room temperature

Bivalent Sr2+ doping to improve room-temperature TCR of La0.8-Sr Ag0.2MnO3 polycrystalline ceramics

Influence of Preparation on Structure and Properties of La0.67ca0.33mno3 Bulk Material

Enhancement of temperature coefficient of resistivity in La 0.67Ca0.33MnO3 polycrystalline ceramics

A-site mixed-valence co-doping to optimize room-temperature TCR of polycrystalline La0.8K0.04Ca0.16-Sr MnO3 ceramics

Temperature coefficient of resistance improvement in La0.67Ca0.33MnO3 polycrystalline ceramics with vanadium addition

Adjusting the K-doping of La1-K MnO3 (0.1 ≤ x ≤ 0.35) films to obtain high TCR and LFMR at room-temperature

Refined Sr ion ratio to improve room-temperature TCR of La1-xSrxMnO3 (0.175 ≤ x ≤ 0.235) polycrystalline ceramics

Improved room-temperature TCR of La0.7Ag0.125K0.175MnO3 films by optimizing sintering temperatures

Influence of heat sintering on the physical properties of bulk La 0.67 Ca 0.33 MnO 3 perovskite manganite: role of oxygen in tuning the magnetocaloric response