Abstract:The effect of heat treatments on bulk poly-crystalline La 0.67 Ca 0.33 MnO 3 perovskite manganite is presented, to explore the possible enhancement in magnetocaloric performance. Samples were prepared via conventional solid-state reaction route with annealing and sintering at various temperatures. Detailed measurements of temperature-dependent and field-dependent magnetization were carried out to estimate the Curie point and order of magnetic transition. The increased sintering temperature results in a steep transition near the T C , and establishes the magnetic sensitivity as well as the active zone for substantial magnetocaloric performance, at about 168.2% for the LCM9 (sintered at 900 °C) sample. The cause for the significant improvement in the magnetic and magnetocaloric response is brought to light using detailed X-ray photoelectron spectroscopy (XPS) analysis, highlighting the role of oxygen in modifying the Mn 3+ /Mn 4+ charge ratio. The maximum value of the isothermal magnetic entropy change for the optimized sample is found to be 6.4 J kg −1 K −1 , achieved at 269 K, while temperature-averaged entropy change (TEC) values, TEC(Δ T H–C = 3 K) and TEC(Δ T H–C = 5 K), of 6 J kg −1 K −1 and 5.2 J kg −1 K −1 , respectively, were obtained with a low magnetic field change of 20 kOe. The obtained isothermal entropy change at low field for the optimized La 0.67 Ca 0.33 MnO 3 sample is higher than that of pure Gd and most oxide-based materials. The relative cooling power (RCP) value is around 93 J kg −1 (Δ H = 20 kOe). The order of the phase transition is examined with universal scaling; the scaled entropy change curves confirm the collapse onto a single curve for LCM9, asserting second-order character, whereas the breakdown of the curve with a dispersion relation ( d ) of 101.1% at Θ = −5 confirms the onset of intrinsic first-order nature in the case of the high-temperature-sintered samples. Calorimetry measurements show thermal hysteresis of 2.4 K and 7.1 K for LCM11 (sintered at 1100 °C) at ramp rates of 5 K min −1 and 10 K min −1 , respectively, confirming the first-order nature of the magnetic transition.

Improvement in electronic and magnetic transport of La0.67Ca0.33MnO3 manganites by optimizing sintering temperature

Improvement of Electromagnetic Properties at Room Temperature in La0.625Ca0.375-Sr MnO3:Ag0.2 (x = 0.09–0.15) Ceramics by Sr Doping

Optimization of the electrical transport properties of La0.7Ca0.3MnO3 films by sintering temperature adjustment

Influence of Preparation on Structure and Properties of La0.67ca0.33mno3 Bulk Material

Effect of Sintering Temperature on Magneto-Transport Properties of La0.67Ba0.33MnO3/Ba0.7Sr0.3TiO3 Composites

Enhanced Room Temperature Magnetoresistance and Cluster Spin Glass Behavior in Mo Doping La0.67Sr0.33MnO3

Enhancement of temperature coefficient of resistivity in La 0.67Ca0.33MnO3 polycrystalline ceramics

New Synthesis of Polycrystalline La0.7(SrxCa1−x)0.3MnO3 by Mechanical Alloying

Influence of heat sintering on the physical properties of bulk La 0.67 Ca 0.33 MnO 3 perovskite manganite: role of oxygen in tuning the magnetocaloric response

Magnetically and Electrically Tunable Transport Property of the Heterojunction Composed of La0.9Ca0.1MnO3+δand Nb-doped SrTiO3

Effect of Sintering Process on the Physical Properties of La_(0. 67)Ca_(0. 33)MnO_3 Polycrystal

Insulator–metal Transition and Magnetoresistance of La0.5Ca0.5MnOy Induced by Tuning the Oxygen Content

Optimized electrical transport properties of La0.7Ca0.18Sr0.12MnO3 film by adjusting sintering temperature

The Magnetic and Transport Properties of Fe Doped La0.5ca0.5mno3

Electrical Transport And Magnetic Properties Of La0.5ca0.5mno3-Y With Varying Oxygen Content

Magneto-transport and specific heat behavior of Cd-doped LaCaMnO

Structural, morphological, magnetic and electrical properties of La0.8Na0.2- x □ x MnO3 (0.00 ≤ x ≤ 0.15) manganites

Changing the Ca2+ ion ratio to modulate the temperature coefficient of resistivity (TCR) of La1-Ca MnO3 films prepared by the sol-gel spin coating method

Effect of Ca Content on the Structure and Transport Properties in La0.7ca0.3-Xmno3 Manganites

Curie Temperature and Magnetocaloric Effect of Polycrystalline La0.8-Xca0.2mno3

Magnetic and Transport Properties of Bi0.5Ca0.5–xLaxFe0.3Mn0.7O3(x=0, 0.05, 0.10, 0.15, 0.20, 0.25) Prepared by Molten Salt Method