Abstract:Coagulation has been the most successful pretreatment for the mitigation of membrane fouling, the improvement of permeate quality, and the extension of membrane service life. Membrane coagulation reactor (MCR), which is a coupled coagulation and membrane filtration process, is a promising technology for surface water purification. In order to decrease footprint, promote flocculation efficiency, and mitigate efficiently membrane fouling, a submerged internal loop MCR with in-line coagulation, sludge thickening, and air sparging was developed. In the MCR, the internal loop flow induced by air lift through a flocculation region can cause a continuous flocculation of raw water and consequently avoid the accumulation of fine flocs prone to blocking membrane pores and forming a compact cake layer. Furthermore, the flocs with a large size and a fast settling velocity can consecutively settle into the sludge thickening region and then are discharged for controlling sludge concentration. The MCR with hollow fiber microfiltration membranes and with polyaluminium chloride (PACl) as coagulant exhibited excellent performance in removing the turbidity, total organic carbon (TOC), and dissolved organic carbon (DOC) of surface water at bench-scale test. The turbidity and TOC of the permeate met the needs of centralized water supply set by Standards for Drinking Water Quality (GB 5749-2006) of China, below 1NTU and 5mg/L, respectively. The water flux above 55L/(m(2)h) was achieved at the transmembrane pressure of 0.025MPa. Air sparging could effectively control membrane fouling of the MCR and continuous air sparging was more favorable than intermittent air sparging. The observations by scanning electron microscope showed that the cake layer on membrane surface was loose and irregular and easily cleaned by air sparging, but CaCO3 was difficult to be removed compared to other precipitates, such as those of Al, Si, and Fe. The experimental results indicated that the MCR has a promising application in treating surface water for drinking.

Backpulsing Technology Applied in MF and UF Processes for Membrane Fouling Mitigation: A Review

Hydraulic backwashing for low-pressure membranes in drinking water treatment: A review

Enhanced anti-fouling of forward osmosis membrane by pulsatile flow operation in textile wastewater treatment

Developments of electrospinning technology in membrane bioreactor: A review

In-situ monitoring techniques for membrane fouling and local filtration characteristics in hollow fiber membrane processes: A critical review

Patterned membranes for improving hydrodynamic properties and mitigating membrane fouling in water treatment: A review.

Review of New Approaches for Fouling Mitigation in Membrane Separation Processes in Water Treatment Applications

Temporal Dynamic of Biofouling on the Ultrafiltration Membrane for Wastewater Reclamation and Strategy for Biofouling Pertinence Mitigation

A review of recent advance in fouling mitigation of NF/RO membranes in water treatment: pretreatment, membrane modification, and chemical cleaning

Optimizing Flux Capacity of Dead-end Filtration Membranes by Controlling Flow with Pulse Width Modulated Periodic Backflush

Fouling and Cleaning of Microfiltration Membrane in Municipal Wastewater Reclamation.

Progresses of advanced anti-fouling membrane and membrane processes for high salinity wastewater treatment

Optimization of surface water microfiltration with hydraulic and chemically enhanced backwashing

Utilizing Ultrasonic vibrations to mitigate membrane fouling in domestic wastewater membrane bioreactors: A mini review

A study on enhancing physical cleaning effectiveness in microfiltration membrane system

Membrane filtration enhanced by ultrasound: a review

A review of CFD simulation in pressure driven membrane with fouling model and anti-fouling strategy

Fouling control strategy for submerged membrane bioreactor filtration processes using aeration airflow, backwash, and relaxation: a review

Pulsed Hydraulic-Pressure-responsive Self-Cleaning Membrane

Principles and Performance of A Submerged Internal-Circulation Membrane Coagulation Reactor

Assessment of combination of pressure-relief pulsation flow and diatomite filter-aid in membrane fouling control