Abstract:The China initiative Accelerator Driven System (CiADS) is a 10 MW Lead-Bismuth-Eutectic (LBE) cooled sub-critical Fast Reactor (LFR) driven by a superconducting Linac coupling with a LBE spallation target. To operate CiADS from low power to full thermal power in 10 MW, it is necessary to develop a wide-range neutron flux monitor (NFM) for power monitoring. To cover over 7 order neutron flux, a fission chamber (FC) would be the best choice. This work focuses on the in-core neutron monitoring by using U-235 micro fission chamber (MFC) for study on local power variation. In addition, in-core fission rate can be obtained with MFC neutron measurement. CiADS-like core of LFR is built with a measurement channel to place MFC in the response simulations. The core k eff is changed within 100 pcm with a measurement channel moving from center to outward reflector in different assembly circles. Neutron proportions in three energy regions, mean neutron energy, and fission/capture reaction rate and their ratios are almost the flat in the axial distribution of fuel assemblies. There is a peak of mean neutron energy and high energy neutron component around target in the axial distribution of the first LBE assembly which is between target and fuel assembly. Radial distributions of high and intermediate energy neutron proportions are almost flat, but that of low energy neutron proportions is changed over 5 times. Neutron sensitivities of different detectors are calculated by using 3 groups neutron to fit the thermal neutron sensitivity provided by different manufacturers. Radial distributions of neutron responses are almost flat in the axial center positions of each assembly, but changed observably in outward axial positions. According to the simulations of in-core neutron response, it is demonstrated that detectors can work on the Pulse mode and Campbell mode to cover dynamic range from 1 mW to 20 MW in the neutron monitoring of CiADS-like core.

Dynamic Linear Calibration Method for A Wide Range Neutron Flux Monitor System in Iter

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

Development of a Wide-Range Neutron Flux Monitoring System in EAST

Study of No-liquid Calibration Technique for the Medium-and-large Diameter Electromagnetic Flowmeter

Condition Monitoring for Nuclear Turbines with Improved Dynamic Partial Least Squares and Local Information Increment

Fast Calibration Methods Using Cosmic Rays for a Neutron Detection Array

A Method to Calibrate the N-Γ Discrimination Property of Scintillators in Low Energy Region

Simulation of in-core neutron monitoring with U-235 micro fission chamber for CiADS-like LFR

A Method to Calibrate Beam Position Monitor at HLS 200 MeV Linac

Calibration Method for Electrical Capacitance Tomography Syem and It's Parameters Readjust

A linear calibration method on DNL error for energy spectrum

Analysis of the standard calibration methods for neutron monitors

A dynamic method for online measurement and calibrating with Lorentz force velocimetry

Cumulative Error Calibration of Fluxgate Sensor Considering Temperature Effects

Research on Nonlinearity in In situ Calibration of Permanent Magnet Sodium Flowmeter Without Bluff Body

Performance Calibration Using Cosmic Rays for the Multi-Neutron Correlation Spectrometer

Simulation and calibration of radiation monitoring of nuclear power plant containment sump waste liquid

Experimental characterization of a long counter for neutron fluence measurement

Neutron Multiplicity Counter Design and Calibration

A novel nuclear recoil calibration for liquid helium detectors

Digitalization of the Ex-Core Neutron Flux Monitoring System for APR1400 Nuclear Power Plant