Abstract:As increasing fiber hydrophobicity can significantly improve the paper dewatering process, we found that replacing SBKP and HBKP with 0.5% superhydrophobic CPGMA can significantly improve the dewatering of paper sheets. Therefore, it can be concluded that if CPGMA has little effect on paper properties, it will have potential industrial value in the papermaking industry. Consequently, it is necessary to further study the effect of the CPGMAs@CPAM/SiO2/APAM system on paper properties. To evaluate the application potential of the system in the papermaking industry, we investigated the effects of CPGMAs, which replaced the fibers in the stocks, on the paper properties in the CPAM/SiO2/APAM system. The findings demonstrate that as the CPGMA replacement increased, the paper's tensile strength, bursting strength, tear resistance, and folding endurance all declined. The trend can be segmented into two phases: a rapid decrease for substitution amounts below 0.5% and a gradual decline for substitution amounts exceeding 0.5%. When replaced with a small amount of CPGMAs, there was a negligible effect on these properties. Second, the paper air permeability increased with the CPGMA substitution amount in the stock. Furthermore, the trend of paper air permeability can be divided into two stages—a rapid stage with a substitution amount of 0.5%. A small amount of CPGMAs could distinctly improve the paper's air permeability. Third, CPGMAs, which replaced fibers in the stock, minutely affected the paper formation. A small amount of CPGMAs substantially boosted the efficacy of the process of paper manufacture and certain characteristics of the paper, and it had a negligible impact on the strength of paper. The CPGMAs@CPAM/SiO2/APAM technology has the potential to improve the retention and filtration performance of CPAM/SiO2/APAM.

Effects of the Polymeric Additives on the Stickies Formation in Recycled Fibers Based Papermaking Process

Effect of Fixing Agent Dosage on the Mechanism of Colloidal Substances Retention Onto Pulp

Effect of Different Chemical Treatments on the Dispersion Properties of Carbon Fiber and Paper Properties

Chemical Treatment of Carbon Fibers and the Development of Functional Paper

Study of Sizing with Anionic Rosin Emulsion of the Recycled Paper Pulp

Effect of Sheet Properties of Cellulosic Polyglycidyl Methacrylate-Grafted Fibers in a Cationic Polyacrylamide/SiO2/Anionic Polyacrylamide Retention Aid System

Study on the interactions between dissolved and colloidal substances under the treatment of fixing agents in papermaking

Preparation and Application of Cationic Modified Cellulose Fibrils as a Papermaking Additive

Recycling Paper Mill Sludge with Modified Bentonite

Microstickies Controlling And Paper Strengthening Effects Of Highly Cationic Starches With Different Branching Degrees And Molecular Weights

Using Fixing Agents To Improve Adsorption Of Wet End Chemicals Onto A Bleached Chemithermo- Mechanical Pulp

EFFECT OF FIXING AGENTS ON THE AMOUNT OF WET END CHEMICALS ADSORBED ONTO A BLEACHED CHEMITHERMOMECHANICAL PULP

The Application of Polysaccharides and Their Derivatives in Pigment, Barrier, and Functional Paper Coatings

THE ADHESIVE CAPACITY OF STARCH GRAFT COPOLYMERS TO POLYESTER / COTTON FIBER

Synthesis of an Eco-friendly Bamboo Cellulose-grafted-ployacrylamide Flocculant and Its Flocculation Performance on Papermaking Wastewater

Binary additives of polyamide epichlorohydrin-nanocellulose for effective valorization of used paper

Application of CPAM/Sepiolite Velvet Retention System in Base Paper of Paper-Based Friction Material

Behavior of Polyamine Fixing Agents on Agglomeration of Dissolved and Colloidal Substances in Papermaking

Effect of chitosan and cationic polyacrylamide on optical and mechanical properties of paper made from chemi-mechanical pulps

Influence of density and chemical additives on paper mechanical properties

Effects of xylan-modified precipitated calcium carbonate filler on the properties of paper