Abstract:We discuss here a solution-processed thin film of antimony trisulphide (Sb2S3; band gap ≈ 1.7 eV; electronic configuration: ns2np0) for applications in planar heterojunction (PHJ) solar cells. An alternative solution processing method involving a single-metal organic precursor, viz., metal-butyldithiocarbamic acid complex, is used to grow the thin films of Sb2S3. Because of excess sulphide in the metal complex, the formation of any oxide is nearly retarded. Sb2S3 additionally displays structural anisotropy with a ribbon-like structure along the [001] direction. These ribbon-like structures, if optimally oriented with respect to the electron transport layer (ETL)/glass substrate, can be beneficial for light-harvesting and charge-transport properties. A PHJ solar cell is fabricated comprising Sb2S3 as the light absorber and CdS as an ETL coated on to FTO. With varying film sintering temperature and thickness, the typical ribbon-like structures predominantly with planes hkl: l = 0 stacked horizontally along with respect to CdS/FTO are obtained. The morphology of the films is observed to be a function of the sintering temperature, with higher sintering temperatures yielding compact and smooth films with large-sized grains. Maximum photon to electricity efficiency of 2.38 is obtained for PHJ solar cells comprising 480 nm thick films of Sb2S3 sintered at 350 °C having a grain size of few micrometers (>5 μm). The study convincingly shows that improper grain orientation, which may lead to nonoptimal alignments of the intrinsic structure with regard to the ETL/glass substrate, is not the sole parameter for determining photovoltaics performance. Other solution-processing parameters can still be suitably chosen to generate films with optimum morphology, leading to high photon to electricity efficiency.

Preferentially Oriented Large Antimony Trisulfide Single-Crystalline Cuboids Grown on Polycrystalline Titania Film for Solar Cells

Solution‐Processed Compact Sb2S3 Thin Films by a Facile One‐Step Deposition Method for Efficient Solar Cells

Solution‐Processed Compact Sb 2 S 3 Thin Films by a Facile One‐Step Deposition Method for Efficient Solar Cells

Self-assembled growth of quasi-vertically oriented Sb2S3 thin films for substrate structured solar cells

Oriented Organization of Poly(3-Hexylthiophene)for Efficient and Stable Antimony Sulfide Solar Cells

Quasi-Vertically-Orientated Antimony Sulfide Inorganic Thin-Film Solar Cells Achieved by Vapor Transport Deposition.

Quasiepitaxy Strategy for Efficient Full‐Inorganic Sb2S3 Solar Cells

Orientation control of close-spaced sublimation processed Sb2S3 thin films for efficient and stable planar solar cells

Solution Processed AgSbS2 Film for Efficient Planar Heterojunction Solar Cells

Quasiepitaxy Strategy for Efficient Full‐Inorganic Sb <sub>2</sub> S <sub>3</sub> Solar Cells

All-Vacuum-Processed Sb-2(S,Se)(3) Thin Film Photovoltaic Devices via Controllable Tuning Seed Orientation

All-Vacuum-Processed Sb<sub>2</sub>(S,Se)<sub>3</sub> Thin Film Photovoltaic Devices via Controllable Tuning Seed Orientation

Self‐Regulated Growth of Large‐Grain Sb2S3 Thin Films for High‐Efficiency Solar Cells

Solution-Processed in Situ Growth of CuInS2 Nanoparticle Films for Efficient Planar Heterojunction Solar Cells with a Dual Nature of Charge Generation

Solution‐Processed Sb2(S, Se)3 Seeds‐Assisted Sb2Se3 Thin Film Growth for High Efficiency Solar Cell

Sb2s3 Seed-Mediated Growth Of Low-Defect Sb2s3 On A Tio2 Substrate For Efficient Solar Cells

Surface Treatment Processed Electron Transport Layers for Efficient Sb2S3 Solar Cells

Vertically Aligned One-Dimensional Crystal-Structured Sb2Se3 for High-Efficiency Flexible Solar Cells Via Regulating Selenization Kinetics

Heterogeneous Nucleation Regulation Amends Unfavorable Crystallization Orientation and Defect Features of Antimony Selenosulfide Film for High‐Efficient Planar Solar Cells

Reactive Ion Etching Activating TiO2 Substrate for Planar Heterojunction Sb2S3 Solar Cells with 6.06% Efficiency

Planar Heterojunction Solar Cell Employing a Single-Source Precursor Solution-Processed Sb2S3 Thin Film as the Light Absorber