Abstract:Wire arc additive manufacturing (WAAM) offers a viable solution for fabricating large-scale metallic parts, which contain various forms of inclined thick-walled structure. Due to the variety of heat dissipation conditions at different positions, the inclined thick-walled structure is a major challenge in fabrication that may produce collapses and defects. However, there is a lack of effective sensing method for acquiring the forming appearance of individual beads in the structure. This paper proposes a novel approach for extracting individual bead profiles during the WAAM process. The approach utilizes a structured-laser sensor to capture the morphology of the surface before and after deposition, thereby enabling an accurate acquisition of the bead profile by integrating the laser stripes. Utilizing the proposed approach, the research investigated the forming mechanism of beads in inclined thick-walled components that were fabricated by various deposition parameters. The width of the overlapping area at the overhanging feature decreased as the layer number increased, while the height of the same area increased. The height of the overlapping area in each layer increased with an increase in deposition current and decreased when the deposition speed was increased. These phenomena suggest that the heat input is a major factor that influences the formation of the overhanging feature. Both the deposition current and deposition velocity influence heat input, and thereby have an effect in enhancing the geometrical accuracy of an overhanging feature. The experimental results indicate that the proposed approach facilitates morphology change investigation, providing a sufficient reference for optimizing deposition parameters.

Morphology Analysis Of A Multilayer Single Pass Via Novel Metal Thin-Wall Coating Forming

Morphology Analysis and Process Research on Novel Metal Fused-coating Additive Manufacturing

Forming Characteristics of Thin-Walled Samples by Metal Fused-Coating Additive Manufacturing

Experimental Analysis of Component Morphology by Fused Coating Process

Research on width control of Metal Fused-coating Additive Manufacturing based on active control

Evaluation of material extrusion and laser-assisted in situ consolidation integrated additive manufacturing for multi-material components

Numerical Simulation and Analysis of Metal Fused Coating Forming

Understanding Internal Defects in Mo Fabricated by Wire Arc Additive Manufacturing Through 3D Computed Tomography

Research on Interlayer Remelting Process of Multi-Layer Forming by Metal Fused-Coating Additive Manufacturing

A Net Shape Profile Extraction Approach for Exploring the Forming Appearance of Inclined Thick-Walled Structures by Wire Arc Additive Manufacturing

Quantification of Interdependent Dynamics during Laser Additive Manufacturing Using X‐Ray Imaging Informed Multi‐Physics and Multiphase Simulation

Macroscopic and Microstructural Features of Metal Thin-Wall Fabricated by Laser Material Deposition: A Review

An Investigation on Effects of Process Parameters in Fused-Coating Based Metal Additive Manufacturing

Numerical Analysis of Fused-Coating Metal Additive Manufacturing

Fabricating Inner Channels in Laser Additive Manufacturing Process Via Thin-Plate-Preplacing Method.

Ultrasonic-assisted preparation-forming-curing process for ultra-thin micro-fiber metal laminates: Deformation characteristics

A Novel High-Efficiency Methodology for Metal Additive Manufacturing

Mechanical Characterization of Multifunctional Metal-Coated Polymer Lattice Structures

The Effect of Laser Remelting on the Microstructure and Mechanical Properties of the Bonding Interface in a Hybrid Metal Additive Manufacturing Process

Forming Metal Components Through a Novel Fused-Coating Based Additive Manufacturing

An Investigation into the Forming of Fiber Metal Laminates with Different Thickness Metal Skins Using Hydromechanical Deep Drawing