Abstract:Recently, molybdenum (Mo) has been recognized a promising biodegradable metal, however, it is difficult to be processed through traditional deformation or machining due to its high strength & hardness. Additive manufacturing is a good way to get rid of this dilemma. Here, Mo components were directly fabricated with fine Mo powder through selective laser melting (SLM). Microstructure, in-vitro corrosion behaviors and biocompatibility of the as-obtained Mo were thoroughly investigated. Compared to Mo fabricated through rotary swaging (RS), ineluctable hot cracks were found in SLMed bulk Mo, and those defects accelerated the initial ion release rate (1.31 μg·mL−1·d−1 during the first week, one order of magnitude higher than that of RSed Mo). The unique SLMed microstructure resulted in different surface chemical components, constituent phases and corrosion layer structures, thus leading to a different corrosion mode and corrosion evolution along with time. SLMed Mo exhibited good hemocompatibility, and mouse/rat-derived mesenchymal stem cells have certain tolerance to soluble Mo in the sample extracts. However, the deteriorative surface condition on SLMed Mo impaired its biocompatibility to directly attached cells. Cells could adhere onto SLMed Mo, however their proliferation and spreading were impaired along with further corrosion. Additive manufacturing is a powerful tool to fabricate Mo based structural parts, however, the issue of microstructural defects should be well resolved. Close attention should be paid to the hot-cracks and accompanied fast & non-uniform corrosion. Statement of Significance Additive manufacturing is a good way to fabricate implants based on refractory and un-processable biodegradable metals. Here, Mo components were directly fabricated with Mo powder through selective laser melting (SLM). Microstructure, in-vitro corrosion behaviors and biocompatibility of the as-obtained Mo were thoroughly investigated. Compared to Mo fabricated through traditional rotary swaging (RS), the unique SLMed microstructure resulted in different corrosion mode and corrosion evolution along with time. Localized corrosion appeared at the micro-cracks in SLMed samples, thus leading to a 10-fold ion release at week 1. Cells could adhere onto SLMed Mo, however their proliferation and spreading were impaired along with further corrosion. Close attention should be paid to the hot-cracks and accompanied fast & non-uniform corrosion.

Understanding Internal Defects in Mo Fabricated by Wire Arc Additive Manufacturing Through 3D Computed Tomography

Microstructure, Compressive Performance and Wear Resistance of Pure Molybdenum Additively Manufactured Via Laser Powder Bed Fusion

Microstructure and Mechanical Properties of Unalloyed Molybdenum Fabricated Via Wire Arc Additive Manufacturing

Investigation of the Effect of Artificial Internal Defects on the Tensile Behavior of Laser Powder Bed Fusion 17–4 Stainless Steel Samples: Simultaneous Tensile Testing and X-Ray Computed Tomography

In Situ Monitoring of Internal Defects by a Laser Sensor for CMT Based Wire-Arc Additive Manufacturing Parts

3D-imaging of selective laser melting defects in a Co-Cr-Mo alloy by synchrotron radiation micro-CT

Research on Mechanisms and Controlling Methods of Macro Defects in TC4 Alloy Fabricated by Wire Additive Manufacturing

Dislocation Evolution During Additive Manufacturing of Tungsten

Defects in Metal Additive Manufacturing Processes

In-vitro Corrosion and Biocompatibility of Additively Manufactured Biodegradable Molybdenum

Regionalization of microstructure and mechanical properties of Ti6Al4V transition area fabricated by WAAM-LMD hybrid additive manufacturing

From process to property: multi-physics modeling of dislocation dynamics and microscale damage in metal additive manufacturing

Research about the Microcrack Mechanisms in Molybdenum and Corresponding Suppression Strategies During Laser Additive Manufacturing Process

Discovering the role of the defect morphology and microstructure on the deformation behavior of additive manufactured Ti–6Al–4V

Defect-correlated fatigue resistance of additively manufactured Al-Mg4.5Mn alloy with in situ micro-rolling

Investigation of Microstructure and Mechanical properties of Al-Si alloy Thin Walled cylindrical part fabricated by CMT based WAAM Process

Investigation of Surface Residual Stress, Mechanical Properties, and Metallurgical Characterization of Inconel 625 Multilayer Thin-Wall Component Using Cold Metal Transfer Technique

Understanding the strain localization in additively manufactured materials: Micro-scale tensile tests and crystal plasticity modeling

Microstructure characteristics under varying solidification parameters in different zones during CMT arc additive manufacturing process of 2319 aluminum alloy

Crystal Plasticity Analysis of the Evolutions of Temperature, Stress and Dislocation in Additively Manufactured Tungsten

Characterization of 5356 Aluminum Walls Produced by Wire Arc Additive Manufacturing (WAAM)