Abstract:In this study, we develop a roasting method for removing arsenic from sulfide copper-arsenic-containing materials. The object of the study was fine dust from copper smelting production of the following composition (wt%): 34.89 – Zn; 20.02 – Cu; 17.74 – Pb; 17.07 – Fe; 7.12 – As; 0.92 – Sb; 0.69 – Sn; 0.63 – Ca; 0.42 – Mo; and 0.34 – K. The chemical composition of the materials was analyzed using an SHIMADZU EDX-7000 energy dispersive X-ray fluorescence spectrometer and a Bruker D8 Advance diffractometer. The roasting process was carried out in a laboratory tube furnace at a temperature of 550–800°C for 60–120 minutes with the addition of 25–50% of FeS 2 to the charge. Optimal conditions for reducing residual arsenic in the calcine to less than 0.3 wt% were identified: a temperature of 750–800°C, a duration of 1.5–2.0 h (in an inert atmosphere), and the use of 30 wt% of pyrite concentrate in the charge. Arsenic removal to the gas phase reached 91–96%. It is shown that in order to reduce the processing temperature to 600°C, it is necessary to add a reducing agent (coke fines) to the mixture of copper smelting dust with pyrite or increase the proportion of pyrite in the test charge to 50 wt% and hold the mixture for 1.5–2.0 h under inert atmosphere (argon and nitrogen) or low-oxygen blast. Arsenic removal to the gas phase reached 97%. X-ray spectral analysis of the residue deposited on the cooled ends of quartz tubes following the release of gases formed during roasting revealed that this material is predominantly (up to 93%) composed of arsenic. The resulting calcine contained 94 wt% of iron, zinc, copper and lead compounds. Therefore, the calcine obtained during the roasting of fine dust from copper smelting production is suitable for returning to the copper production process.

Extraction Of Metal Arsenic From Waste Sodium Arsenate By Roasting With Charcoal Powder

Removal of arsenic and recovery of tin from arsenic-containing multi-metallic materials by vacuum reduction roasting

Co-treatment of copper smelting flue dust and arsenic sulfide residue by a pyrometallurgical approach for simultaneous removal and recovery of arsenic

An all-in-one strategy for resource recovery and immobilization of arsenic from arsenic-bearing gypsum sludge

Reaction Mechanism and Technical Application of Recovery FeAs, Sb, and Na2CO3 from Arsenic-Alkali Residue

A novel method for dearsenization from arsenic-bearing waste slag by selective chlorination and low-temperature volatilization

Effective Removal of Arsenic from Copper Matte by Sodium Carbonate

Process and Mechanism Investigation on Comprehensive Utilization of Arsenic-Alkali Residue

Innovative methodology for comprehensive utilization of arsenic-bearing neutralization sludge

Enhanced As (V) Removal from Aqueous Solution by Biochar Prepared from Iron-Impregnated Corn Straw

Recovery of alkali, selenium and arsenic from antimony smelting arsenic-alkali residue

Synergy of directional oxidation and vacuum gasification for green recovery of As2O3 from arsenic-containing hazardous secondary resources

Removal of Arsenic During Iron Extraction from Waste Copper Slag

Arsenic Removal and Iron Recovery from Arsenic-Bearing Iron Ores by Calcification-Magnetic Roasting and Magnetic Separation Process

Effect of roasting parameters on arsenic removal from copper smelting dust

Transformation of Arsenic During Realgar Tailings Stabilization Using Ferrous Sulfate in a Pilot-Scale Treatment.

Purification of crude As2O3 recovered from antimony smelting arsenic-alkali residue

A novel scheme for safe disposal and resource utilization of arsenic-alkali slag

In situ mechanochemical activation of reduced iron powder for arsenic stabilization in high content arsenic sulfide sludge

Selective removal of arsenic from arsenic-containing copper dust by low-temperature carbothermal reduction

Mechanism and kinetics for the carbothermal reduction of arsenic-alkali mixed salt produced from treatment of arsenic-alkali residue