Abstract:In the present paper, multi-response mathematical model is established for prediction of weld bead geometry in cold metal transfer (CMT), MIG pulse synergic (MIG P), and MIG manual (MIG M) welding of AA6061-T6 using ER4043 (AlSi5%) as a filler material. Central composite face-centered design under response surface methodology is employed to develop the design matrix for conducting the experiments. The developed model is employed in finding the optimal process parameters for good weld bead aesthetics. Current (<i>I</i>) and welding speed (<i>S</i>) are opted as input process parameters for response output such as penetration, dilution, and heat input. This model is proficient to forecast the main effects and interactive effects of two factors of the opted welding process parameters. Results show that higher current values with low welding speeds result in deeper penetration, high amount of dilution with higher heat input, and vice versa. With lower heat input, CMT has high dilution and penetration with respect to MIG pulse synergic and standard MIG welding. Repeatability of CMT process is much higher as compared to the other two processes. The optimal process parameters are 92.518 A and 7.50 mm/s for CMT, 109.418 A and 10.873 mm/s for MIG P, and 110.847 A and 11.527 mm/s for MIG M with 61.11%, 68.80%, and 72.6% desirability, respectively. Predicted output values generated from regression model equation obtained from welding process parameters are very close and sometimes overlaid on actual output that obviously demonstrates the suitability of the second-order regression equations. A good amount of penetration and dilution with low heat input is required for better joint efficiency.

Mathematical Model for Prediction and Optimization of Weld Bead Geometry in All-Position Automatic Welding of Pipes

The mathematical model for the prediction and optimization of weld bead geometry in all-position low-power pulsed laser-MAG hybrid welding

Prediction and Optimization of Weld Bead Geometry in Oscillating Arc Narrow Gap All-Position GMA Welding

Simulation and prediction for welding deformation on welding procedure of hand pallet truck

Numerical Prediction and Control of Deformation and Residual Stress in Double-Sided Arc Welding of Large Pressure Hull

Multi-response Mathematical Modeling for Prediction of Weld Bead Geometry of AA6061-T6 Using Response Surface Methodology

Multi-response mathematical modelling, optimization and prediction of weld bead geometry in gas tungsten constricted arc welding (GTCAW) of Inconel 718 alloy sheets for aero-engine components

A Comprehensive Prediction Model of Bead Geometry in Wire and Arc Additive Manufacturing

Multi-objective Prediction and Optimization of X70 Pipeline Steel Welding Morphology in Overhead Laser-Mag Hybrid Welding Based on RSM-NSGA-II

Prediction and optimization method for welding quality of components in ship construction

Sensitivity Model for Prediction of Bead Geometry in Underwater Wet Flux Cored Arc Welding

Achieving Optimal Weld Bead Geometry and Dilution Ratio in Tungsten Inert Gas–Metal Inert Gas Hybrid Welding through ANN-TLBO Algorithmic Optimization

Accurate Prediction of the Weld Bead Characteristic in Laser Keyhole Welding Based on the Stochastic Kriging Model

Prediction and Optimization of Tensile Properties of 2219-T8 Aluminum Alloy TIG Welding Joint by Machine Learning

Bead geometry prediction based on SVM

Backside Weld Bead Shape Modeling Using Support Vector Machine

Modeling and numerical study of the molten pool dynamics during scanning electron beam welding of aluminum alloys: Physical mechanism, prediction and parameter selection

Predicting Characteristic Performance for Arc Welding Process

Prediction of Bead Geometry with Changing Welding Speed Using Artificial Neural Network

Real time welding parameter prediction for desired character performance.

Investigation, Modeling and Optimization of Abnormal Areas of Weld Beads in Wire and Arc Additive Manufacturing