Abstract:Skilled human welders can control the weld joint penetration through observing the molten pool. This suggests that a model may be developed to predict the backside bead width, that quantitively measures the weld joint penetration, from the weld pool surface. However, the weld pool surface is specular and subject to the radiation of the arc such that its measurement is challenging. At the University of Kentucky, the weld pool surface is measured using an innovative a 3-D vision sensor that can overcome the challenges caused by the specular nature and arc radiation; and the measured surface is characterized by three parameters. Because of the lack of physics based model, neural networks would typically be used to approximate the unknown correction, which is nonlinear in general, between the backside bead width and the characteristics parameters. Unfortunately, neural networks require large amount of data to train for adequate model accuracy. While the weld pool surface can be measured using the innovative 3D sensor, the ground truth for the backside bead width needs to be measured offline after the experiment and to this end the work-work needs to appropriately cleaned/processed. Large amount of training data needed may not be easily obtained. To improve the critical ability to accurately predict the backside bead width, models need to be established from relatively small amount of training data. To this end, the authors propose to use the support vector regression (SVR) method and hypothesize that a SVR model trained using the small amount of the training data available would perform better than that a multi-layer perceptron (MLP) artificial neural network model trained using the same data. Modeling results show that for the relatively small training data available, the optimized SVR model provides a more accurate prediction to the backside bead width. As such, the authors systematically advanced the ability to accurately predict the weld joint penetration. The use of the innovative 3D sensor to obtain the 3D weld pool surface and the proposed use of the support vector method to address the small data issue played crucial roles.

Backside Weld Bead Shape Modeling Using Support Vector Machine

Predicting Characteristic Performance for Arc Welding Process

A study of welding process modeling based on Support Vector Machines

Dynamic Modeling of Weld Bead Geometry Features in Thick Plate GMAW Based on Machine Vision and Learning

Investigation, Modeling and Optimization of Abnormal Areas of Weld Beads in Wire and Arc Additive Manufacturing

A complementary approach to experimental modeling and analysis of welding processes: dimensional analysis

Using support vector machine for modeling of pulsed GTAW process

Modeling of bead section profile and overlapping beads with experimental validation for robotic GMAW-based rapid manufacturing

SVM-based Fuzzy Modeling for the Arc Welding Process

Study on the Weld Profile Model Function of Multi-Layer Single-Pass Deposition in Wire and Arc Additive Manufacturing

Intelligent Methodology for Sensing, Modeling, and Control of Weld Penetration in Robotic Welding System.

Mathematical Model for Prediction and Optimization of Weld Bead Geometry in All-Position Automatic Welding of Pipes

Modelling and optimization of weld bead geometry in robotic gas metal arc-based additive manufacturing using machine learning, finite-element modelling and graph theory and matrix approach

Modeling and numerical study of the molten pool dynamics during scanning electron beam welding of aluminum alloys: Physical mechanism, prediction and parameter selection

A Generalized Rough Set Modeling Method for Welding Process

Bead geometry prediction based on SVM

Machine Learning of Weld Joint Penetration from Weld Pool Surface Using Support Vector Regression

Application of RVM for prediction of bead shape in underwater rotating arc welding

Predicting the Backside Width of Weld Pool During Pulsed Gtaw Process Based on A Neural Network Model

Prediction and Optimization of Weld Bead Geometry in Oscillating Arc Narrow Gap All-Position GMA Welding

Modeling Of Underwater Wet Welding Process Based On Visual And Arc Sensor