Microstructure Evolution of a High Nb Containing TiAl Alloy with (alpha(2) + gamma ) Microstructure during Elevated Temperature Deformation

Yudong Chu,Jinshan Li,Lei Zhu,Yan Liu,Bin Tang,Hongchao Kou

DOI: https://doi.org/10.3390/met8110916

IF: 2.695

2018-01-01

Metals

Abstract:In order to verify the correctness of the transition of deformation mechanism with the change in deformation parameters and to reveal the types and mechanism of dynamic recrystallization of gamma grains during compression deformation, microstructure characterization of Ti-43.5Al-8Nb-0.2W-0.2B (at. %) alloy after isothermal compression deformation were performed. When the alloy was deformed at 1000 degrees C/10(-2) s(-1), the initial gamma grains are elongated and significantly refined and the fraction of low angle grain boundaries (LAGB) of gamma grains is obviously increased and the texture intensity remains unchanged, which indicates that the compression deformation in dislocation creep region is dominated by intragranular deformation and dynamic recrystallization (DRX) of gamma grains. Besides, the lattice rotation at grain boundary serrations may be responsible for the nucleation of new recrystallized gamma grains, and the following growth process may be achieved by the migration of gamma grain boundaries. However, when the alloy deformed at 1050 degrees C/10(-4) s(-1) and 1000 degrees C/10(-4) s(-1), the gamma grains maintain equiaxed shapes and distribute more uniformly and the fraction of LAGB of gamma grains is slightly raised and the texture sharpness decreases, which indicates that the compression deformation in grain boundary sliding (GBS) region is mainly controlled by GBS of gamma grains and DRX occurs simultaneously within some coarse gamma grains.