Abstract:Due to its multi-principal component characteristics, high-entropy alloys exhibit excellent comprehensive mechanical properties and become a new generation of engineering structure alternative materials. At present, a single constitutive model is used to describe the change of flow stress in the study of hot deformation behavior of high-entropy alloys, and there are some problems such as inaccurate prediction accuracy or inapplicability of the model in some hot processing intervals. In this paper, three different constitutive models are combined to fully consider the applicability of the model in different temperature ranges, and the change of flow stress behavior is accurately described, which is of great significance for subsequent deformation mechanism research, hot processing process optimization, numerical simulation and so on. Thermal compression experiments on cast Ni 28.5 Co 18.6 Fe 18.2 Al 16.3 Cr 10.5 Mo 4 Ti 2.3 Nb 0.6 W 0.9 C 0.2 high-entropy alloy were carried out using a Gleeble-3800 thermal simulation tester with deformation temperatures in the range from 900 °C to 1150 °C and strain rates from 0.001 s -1 to 1 s -1 . The constitutive relationships between true stress and strain, temperature and strain rate were established, while the heat deformation process of this alloy under different deformation conditions by Arrhennius, Modified Johnson-Cook and Modified Fields-Backofen models were characterized. The results indicate that Arrenius model describe the rheological behavior of the alloy better in a wider temperature range and at a wider strain rate range. Comparatively, the model shows the highest prediction accuracy in the high-temperature region and slightly lower accuracy in the mesothermal and low-temperature regions. The modified J-C and F-B models have better prediction accuracy in the low-temperature and medium-temperature regions, respectively. Due to the different deformation conditions, dislocation configurations such as dislocation tangles, dislocation networks, and subcrystalline junctions can be observed in the plastic deformation region. The dislocation density of this alloy increases with increasing strain rate and decreasing deformation temperature after deformation.

Constitutive modeling and strain hardening of CoCrFeNiAlx high-entropy alloys

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

A multi-scale constitutive model for analyzing the tensile deformation of eutectic high-entropy alloys

Microstructural Evolution and Mechanical Properties of Al0.3CoCrFeNiSix. High-Entropy Alloys Containing Coherent Nanometer-Scaled Precipitates

Investigation of mechanical behavior, constitutive modeling, and fracture criteria for as-cast Al0.3CoCrFeNi high entropy alloy

Constitutive modeling of deformation behavior of high-entropy alloys with face-centered cubic crystal structure

Enhancing the Strength of AlCrFeNi HEAs Via Tailoring Aluminum Content and Optimal Aging Treatment

Microstructural evolution and mechanical properties of FeCoCrNiCu high entropy alloys: a microstructure-based constitutive model and a molecular dynamics simulation study

Molecular simulation of microstructure evolution and plastic deformation of nanocrystalline CoCrFeMnNi high-entropy alloy under tension and compression

Study on thermal deformation constitutive model of NiCoFeAlCrMo high-entropy alloy with FCC / L12 coherent structure

Dynamic deformation behaviors and mechanisms of CoCrFeNi high-entropy alloys

Tensile properties and strengthening mechanisms of eutectic high-entropy alloys induced by heterostructure

Dynamic Mechanical Behavior and Microstructure of the Al 0.1 CoCrFeNiTi x High‐Entropy Alloys

High-temperature tensile behavior and constitutive model in Co-free Fe40Mn20Cr20Ni20 high-entropy alloy

Cyclic plasticity of an interstitial high-entropy alloy: experiments, crystal plasticity modeling, and simulations

Markovian Spatial Properties of a Random Field Describing a Stochastic Neural Network: Sequential of Parallel Implementation?

The influence of heat treatment on microstructure and mechanical response of a newly developed non-equimolar AlCrCuFeNi high-entropy alloy: Experiments and numerical modeling

Plasticity Improvement in a Co-Rich Co<sub>40</sub>Fe<sub>25</sub>Cr<sub>20</sub>Ni<sub>15</sub> High-Entropy Alloy via Al Alloying

In-situ study of room temperature tensile deformation of a CrMnFeCoNi high-entropy alloy

Multiscale-phase-driven strength-ductility synergy in Fe3Cr2CoNiAlx high entropy alloys

Constitutive equation and microstructure analysis of Al0.6CoCrFeNi high entropy alloy during hot deformation