Abstract:Hard chromium coatings electrodeposited are highly valued in multiple industries for their excellent mechanical characteristics and resistance to corrosion. The general process for preparing these coatings includes Cr6+ and Cr3+ process, the Cr6+ process is highly toxic and strictly regulated. The Cr3+ process is less hazardous but can produce coatings with defects. We propose an alternative process of electroplating nanocrystalline Cr-Al alloy coating with high hardness by using anhydrous Cr2+ electrolyte. The impact of current density on mechanical properties (i.e., hardness H, elastic modulus E, fracture toughness H/E and resistance to plastic deformation H-3/E-2) and coating defects has been systematically investigated. As current density increases from 1 mA/cm(2) to 5 mA/cm(2), the coating surface morphology changes from polyhedral to nodular clusters with grain size decreasing from a few microns to several nanometers. The nanoindentation test was performed on the cross-section of the coating. The nanohardness H of the coating reaches a high of 8.26 GPa, attributed to both solid solution strengthening and grain refinement. A significant decrease in elastic modulus E of the coating compared to bulk Cr is observed and can be explained by the grain boundary mediated process and a grain coalescence model. High values H/E and H-3/E-2 indicate improved fracture toughness and resistance to plastic deformation of the coating. As current density exceeding 5 mA/cm(2), laminar cracks develop due to co-deposition of CrCl2 particles. This is attributed to the electrolyte acidity transition, caused by depletion of Al2Cl7- at the interface. This work provides a deeper understanding of the microstructural evolution, mechanical properties and defects of Cr-Al alloy coatings and also provides a new method to fabricate high-quality coatings with enhanced properties. The defect-free coatings achieved in this study have great potential for practical applications in various fields such as tribological and corrosion resistance coatings.

The effects of main salt concentrations and deposition voltages on the structures and properties of cathode plasma electrolytic deposited Cr2O3 coatings

EIS Investigation of the Deposition of Trivalent Chromium Coatings on Al 6063 Alloy

Improved electrochemical performance of trivalent-chrome coating on Al 6063 alloy via urea and thiourea addition

Investigation of the trivalent-chrome coating on 6063 aluminum alloy

Preparation of Al-Cr-Fe Coatings by Heat Treatment of Electrodeposited Cr/Al Composite Coatings

Effect of Voltage and Duty Cycle on Microstructure and Corrosion Resistance of ZrO2 Coating by Cathode Plasma Electrolytic Deposition

Influence of Cr Nanoparticles on Plasma Electrolytic Oxidation Coatings on AM50 Mg Alloy

Microstructure and corrosion behavior of Cr and Cr–P alloy coatings electrodeposited from a Cr(III) deep eutectic solvent

The effect of electric conductivity on the structure of ceramic coatings prepared by cathode plasma electrolytic deposition

Effects of Heat Treatment on Structure Transformation of Cr/Al Composite Coatings

Electrodeposition of High-Quality Cr Coatings with Solid Solution Al from Cr2+ Electrolyte

Structure Analysis and Formation Mechanism of Ce Doped Al2O3 Coatings Prepared by Cathode Plasma Electrolytic Deposition

The Effect of Chromium on the Gamma to Alpha Phase Transition of Alumina Coating Formed on 316L SS by a Cathodic Micro Arc Deposition (CMAD) Process

Improvement of Structures and Properties of Al2O3 Coating Prepared by Cathode Plasma Electrolytic Deposition by Incorporating SiC Nanoparticles

Effect of Current Density on the Mechanical Properties and Defects of Nanocrystalline Cr-Al Solid Solution Alloy Coatings

Initial microstructure and composition evolution of Al 2 O 3 coatings fabricated by cathode plasma electrolytic deposition under constant voltage

Mechanical and high-temperature steam oxidation properties of Cr coatings deposited via high-power impulse magnetron sputtering

Effects Of Chromium On The Oxidation Performance Of Beta-Fealcr Coatings

Effects of Cr3 C2 on Microstructure and Wear Resistance of Cobalt-Base Alloy Coating Deposited by Plasma Transferred Arc Surfacing

Effect of Na3AlF6 on the Structure and Mechanical Properties of Plasma Electrolytic Oxidation Coatings on 6061 Al Alloy

Effect of suspension plasma spraying power on the microstructure and properties of Cr 2 AlC coatings