Abstract:Background With the current rapid economic growth, demands for energy are progressively increasing. Energy shortages have attracted significant attention due to the shrinking availability of non-renewable resources. Therefore, thermal energy storage is one of the solutions that lead to saving of fossil fuels and make systems more cost-effective by the storage of wasted thermal energy. In particular, the application of phase change materials (PCMs) is considered as an effective and efficient approach to thermal energy storage because of the high latent heat storage capacity at small temperature intervals. Nevertheless, leakage problems and low thermal conductivity limit the practical applications of PCMs. Therefore, form-stable phase change materials with high thermal conductivity are urgently needed. Results A novel form-stable composite phase change material was prepared by incorporating PEG into waste sawdust with 5% EG. In the composites, PEG served as a phase change material, while waste sawdust acted as a carrier matrix. EG was added to help increase the thermal conductivity of the composites. The melting temperature of CPCMs-4 with 5% EG was found to be 58.6 °C with a phase change enthalpy of 145.3 kJ/kg, while the solidifying temperature was 48.5 °C with a phase change enthalpy of 131.4 kJ/kg. The thermal conductivity of CPCMs-4 with 5% EG increased by 23.8% compared with that of CPCMs-4. Moreover, no obvious changes in melting, solidifying temperature, or latent heat after 200 heating–cooling cycles were detected. The supercooling extent of CPCMs-4 with 5% EG decreased by 19.2% compared with PEG. The volume change properties and wettability properties of CPCMs-4 with 5% EG are suitable for thermal energy in terms of practical application. Conclusions The prepared composites have excellent thermal and form-stable properties and they can be recognized as potential candidates for thermal energy storage as form-stable composite phase change materials. Using simple impregnation techniques with waste sawdust as a supporting material, this study demonstrates an innovative technology for practically and markedly enhancing the adsorption capacity of phase change materials.

Hierarchically Channel-Guided Porous Wood-Derived Shape-Stabilized Thermal Regulated Materials with Enhanced Thermal Conductivity for Thermal Energy Storage

Thermally Conductive and Shape‐Stabilized Polyethylene Glycol/Carbon Foam Phase‐Change Composites for Thermal Energy Storage

Shape-stable composite phase change materials encapsulated by bio-based balsa wood for thermal energy storage

Porous Carbonated Wood/polyethylene Glycol/mxene Phase Change Composites: Preparation, Structure and Performances

Composite phase change materials of ultra-high molecular weight polyethylene/paraffin wax/carbon nanotubes with high performance and excellent shape stability for energy storage

Honeycomb-like structured biological porous carbon encapsulating PEG: A shape-stable phase change material with enhanced thermal conductivity for thermal energy storage

Enhanced thermal conductivity of waste sawdust-based composite phase change materials with expanded graphite for thermal energy storage

High interface compatibility and phase change enthalpy of heat storage wood plastic composites as bio-based building materials for energy saving

Polyethylene Glycol–Calcium Chloride Phase Change Materials with High Thermal Conductivity and Excellent Shape Stability by Introducing Three-Dimensional Carbon/Carbon Fiber Felt

Shape-stable composite phase change materials encapsulated by lignin-based ordered porous carbon for thermal energy storage

Thermal Behavior of Composite Phase Change Materials Based on Polyethylene Glycol and Expanded Vermiculite with Modified Porous Carbon Layer

High Thermally Conductive Shape-Stabilized Phase Change Composites with Dual-Aligned Carbon Nanofiber Scaffolds

Preparation and thermal properties of shape-stabilized composite phase change materials based on polyethylene glycol and porous carbon prepared from potato

Enhanced Thermal Conductivity of Composite Phase Change Materials Based on Carbon Modified Expanded Perlite

Preparation and characteristic of wood-based inorganic composite phase change material with effective anisotropic thermal conductivity for thermal energy storage

Polyethylene Glycol/Expanded Vermiculite Shape-Stabilized Composite Phase Change Materials for Thermal Energy Storage

A novel composite phase change material of high-density polyethylene/d-mannitol/expanded graphite for medium-temperature thermal energy storage: Characterization and thermal properties

Bio-based Poly (lactic Acid) Shaped Wood-Plastic Phase Change Composites for Thermal Energy Storage Featuring Favorable Reprocessability and Mechanical Properties

Shape-stable phase change composites based on carbonized waste pomelo peel for low-grade thermal energy storage

A Unique Strategy for Polyethylene Glycol/Hybrid Carbon Foam Phase Change Materials: Morphologies, Thermal Properties, and Energy Storage Behavior

Highly Thermal Conductive Phase Change Materials Enabled by CNTs-modified PVA Aerogel for Solar Energy Storage and Thermal Management of Electronic Components