Abstract:The form-stable paraffin/high-density polyethylene/expanded graphite/epoxy resin composite phase change materials (CPCMs), exhibiting suitable thermal properties, including low melting temperature, high conductivity and high phase change enthalpy, was developed in this work. Herein, paraffin (PA) was utilized as a core PCM. High-density polyethylene (HDPE) was utilized for the shape stabilization and preventing the PCMs leakage. Expanded graphite (EG) was used to increase its thermal conductivity and act also in the porous supporting material. Epoxy resin (ER) was used to provide flexible encapsulated scaffold morphology and keep a highly tight network structure of the PCMs. However, the physical architecture, the chemical architecture and thermal behavior properties of specimens were investigated by using the spectroscopy and calorimetry techniques. The scanning electron microscope (SEM), X-ray diffraction (XRD) and fourier transform infrared spectrometer FTIR tests have shown good uniformity structure and good compatibility of components. In addition, the thermal conductivity tests revealed that the thermal conductivity of PA, initially 0.31 W/(m·K) improved up to 1.9 times by adding the 6 wt% mass fraction of EG in composite PCMs. Furthermore, the differential scanning calorimeter (DSC) measurements indicated that PA melting enthalpy, initially 231 J/g decreased up to 125 J/g with the increase of the amount of HDPE which was due to the limitation caused by the atomic network constructed by the base material. The thermogravimetric analyzer (TGA) and leakage-proof revealed the enhancement of the degradation of PA with the raise of amount of the HDPE into the CPCMs. Therefore, the proposed form-stable CPCMs are a great candidate for the thermal regulation and thermal energy storage employment.

Enhanced Thermal Conductivity of Composite Phase Change Materials Based on Carbon Modified Expanded Perlite

Polyethylene Glycol–Calcium Chloride Phase Change Materials with High Thermal Conductivity and Excellent Shape Stability by Introducing Three-Dimensional Carbon/Carbon Fiber Felt

Enhanced thermal conductivity of form-stable composite phase-change materials with graphite hybridizing expanded perlite/paraffin

Synergistic phase change and heat conduction of low melting-point alloy microparticle additives in expanded graphite shape-stabilized organic phase change materials

Porous carbon network-based composite phase change materials with heat storage capacity and thermal management functions

Enhancement of Thermo-Physical Properties of Expanded Vermiculite-Based Organic Composite Phase Change Materials for Improving the Thermal Energy Storage Efficiency

Form-Stable Phase Change Materials with Enhanced Thermal Conductivity Based on Binary Capric-Palmitic Acid and Graphite Carbon In Situ Modified Expanded Perlite

Preparation and Thermal Properties of Propyl Palmitate-Based Phase Change Composites with Enhanced Thermal Conductivity for Thermal Energy Storage

Polypyrrole coated carbon nanotube aerogel composite phase change materials with enhanced thermal conductivity, high solar-/electro- thermal energy conversion and storage

Structure, Characterization and Thermal Properties of the Form-Stable Paraffin/High-Density Polyethylene/Expanded Graphite/Epoxy Resin Composite PCMs for Thermal Energy Storage

Improvement in thermal properties of PCM/Expanded vermiculite/expanded graphite shape stabilized composite PCM for building energy applications

Form-Stable phase change composites based on porous carbon derived from polyacrylonitrile hydrogel

Enhancing the solar absorption capacity of expanded graphite-paraffin wax composite phase change materials by introducing carbon nanotubes additives

Ti3C2Tx@Polyvinyl alcohol foam-Supported Phase Change Materials with Simultaneous Enhanced Thermal Conductivity and Solar-Thermal Conversion Performance

Preparation and characterization of paraffin/expanded graphite composite phase change materials with high thermal conductivity

Thermally-induced flexible composite phase change material with enhanced thermal conductivity

Fabrication and comprehensive analysis of expanded perlite impregnated with myristic acid-based phase change materials as composite materials for building thermal management

Carbon nanotubes modified graphene hybrid Aerogel-based composite phase change materials for efficient thermal storage

Constructing heat conduction path and flexible support skeleton for PEG-based phase change composites through salt template method

Thermal Comfort and Flame Retardant Performance of Novel Temperature-Control Coatings with Modified Phase Change Material Microcapsules

Carbon dots efficiently enhance photothermal conversion and storage of organic phase change materials through interfacial interaction