Abstract:With the rapid development of modern electronic technology, addressing the heat dissipation problem of devices has become more and more urgent. Herein, the effects of molybdenum disulfide (MoS2) and hybrid hexagonal boron nitride (h-BN)/MoS2 fillers on the thermal conductivity of polydimethylsiloxane (PDMS) were investigated by reverse non-equilibrium molecular dynamics (RNEMD) simulation with fully atomistic model. Firstly, we simulated the thermal conductivity of MoS2 and BN fillers. It was found that the thermal conductivity of the two fillers enhanced with the increase of their sizes. The intrinsic thermal conductivity of MoS2 and BN obtained via the extrapolation were 52 W/(m·K) and 606 W/(m·K) separately. For 1-5 layers, the number of layers has almost no effect on the thermal conductivity of MoS2, but as the number of layers increase, the thermal conductivity of BN first decreases and then reaches a plateau. Then, we studied the thermal conductivity of the PDMS-based composites. Due to the existence of holes in the PDMS/MoS2 system, the thermal conductivity of PDMS/MoS2 composites is not much improved compared with that of PDMS. Therefore, we then introduced a hybrid BN/MoS2 filler into the composite to solve the void problem in the system. The results proved that this method was effective. The introduction of the hybrid BN/MoS2 filler effectively promoted the dispersion of the two fillers in the PDMS matrix and greatly reduced the holes in the composites. Compared with the composites filled with only one kind of filler, PDMS/BN/MoS2 composites possess better thermal conductivity. The most surprising finding is that there exists an optimal loading ratio of the two fillers, and the thermal conductivity of the composite reached the maximum when the mass ratio of the two fillers is approximately 1:1, attributed to the change of the volume fraction of holes(<math>Φ</math>). In addition, with the increase of hybrid BN/MoS2 filler content, the thermal conductivity of the composites is also increasing. The oscillating shear can also promote the orientation of the filler along the shear direction and improve the thermal conductivity of composites along that direction. Therefore, composites based on hybrid BN/MoS2 nano-fillers can be used to improve the thermal conductivity of insulating polymer materials. The findings should shed some light on the design and preparation of polymer composites with excellent thermal conductivity and electrical insulation properties.

Synergistic Construction of Thermally Conductive Network in Polybenzoxazine with Boron Nitride Hybrid Fillers

Improving Thermal Conductivity of Epoxy Resin by Filling Boron Nitride Nanomaterials: A Molecular Dynamics Investigation

Achieving a 3D Thermally Conductive while Electrically Insulating Network in Polybenzoxazine with a Novel Hybrid Filler Composed of Boron Nitride and Carbon Nanotubes

Mille-Feuille Inspired Thermally Conductive Polymer Nanocomposites with Overlapping BN Nanosheets for Thermal Management Applications.

Synergetic enhancement of thermal conductivity by constructing BN and AlN hybrid network in epoxy matrix

A Green and Facile Method to Fabricate Multifunctional and Highly Thermally Conductive Boron Nitride‐based Polymer Composites

Highly Multifunctional and Thermoconductive Performances of Densely Filled Boron Nitride Nanosheets/Epoxy Resin Bulk Composites

Designing high thermal conductivity of polydimethylsiloxane filled with hybrid h-BN/MoS2 via molecular dynamics simulation

Enhanced the Thermal Conductivity of Polydimethylsiloxane via a Three-Dimensional Hybrid Boron Nitride@Silver Nanowires Thermal Network Filler

Synergistic effect of h-BN on thermal conductivity of polymer composites

Synergistic Improvement in the Thermal Conductivity of Hybrid Boron Nitride Nanotube/Nanosheet Epoxy Composites

Construction of 3D interconnected boron nitride/carbon nanofiber hybrid network within polymer composite for thermal conductivity improvement

Construction of three-dimensional network using boron nitride microspheres and the thermal conductivity/stability of epoxy resin composites

Enhanced Thermal Conductivity of High-Density Polyethylene Composites with Hybrid Fillers of Flaky and Spherical Boron Nitride Particles

Enhanced thermal conductivity and stability of boron nitride/phenyl silicone rubber composites via surface modification and grain alignment

Thermal Conductive Composites Reinforced Via Advanced Boron Nitride Nanomaterials

Enhancement of thermal conductivity of BN-Ni/epoxy resin composites through the orientation of BN-Ni fillers by magnetic field and hot-pressing

Anchoring Carbon Nanotubes to Boron Nitride Microrods for Enhancing the Thermal Conductivity of Polystyrene

Enhanced Thermal Conductivity and Mechanical Properties of BN@polymethylacrylimide/epoxy Composites with Self-Assembled Stable 3D Network

Constructing Heterostructured MWCNT-BN Hybrid Fillers in Electrospun TPU Films to Achieve Superior Thermal Conductivity and Electrical Insulation Properties

Enhanced thermal conductivity in boron nitride incorporated polyethylene/polymethyl methacrylate composites via double percolation structure