Abstract:Low carbon steel plays an important role in many applications due to its high strength. Its high strength comes from the strengthening effect of nano-Cu-rich phase precipitates. In order to effectively adjust the microstructure of Cu-rich phase precipitates and obtain Fe-Cu-based steel with the best properties by adding different alloying elements (Mn, Al), it is necessary to understand the precipitation process of Cu particles. In this paper, based on the Ginzburg-Landau theory, the previous phase field model is modified, and the continuous phase field method is used to simulate the precipitation mechanism of nanometer Cu-rich precipitates and the inhibiting of the effect of Al content on Cu-rich precipitates of Fe-15%Cu-3%Mn- x Al ( x = 1%, 3%, 5% mass fraction) alloy at 873 K isothermal aging. Combining with the free energy derived from thermodynamics database, the microstructure evolution corresponds to the real alloy system. By calculating the composition field variables and structural order parameters, the evolution of phase separation and precipitated phase morphology in aging process are simulated. Moreover, the influence law of morphology, quantity density, average particle radius, growth and coarsening of Cu-rich precipitated phase are discussed. The results show that in the early stage of aging process, the nano-Cu-rich phase precipitates through the spinodal decomposition mechanism, and is randomly distributed in the iron matrix. Furthermore, due to the difference in atomic diffusion rate, the core-shell structure with Cu-rich phase as a core is formed. With the aging time extending, the structure of Cu-rich phase precipitates changes from bcc to fcc. Because of the synergistic effect between Al and Cu, the diffusion of Cu is slowed down. Besides, with the Al and Mn atoms precipitating, Al/Mn clusters are segregated around the Cu-rich precipitates, forming the Al/Mn intermetallic core-shell structure, and gradually wrapping the Cu-rich phase uniformly. During the evolution of the precipitation stage, the Al/Mn clusters are isolated around the Cu-rich precipitation phase, forming a gradually uniform Al/Mn intermetallic phase core shell structure covering the Cu-rich phase, which is to hinder the buffer layer from forming in the precipitation stage of the reservoir. In addition, with the Al content increasing, the Al/Mn intermetallic phase promotes the growth of the buffer layer and hinders the Cu-rich precipitate phase from growing and coarsening.

Metastable Bcc-Cu Precipitation Behavior and Its Effect on Microstructure and Strengthening of As-Cast Fe–B Alloy Containing 3 Wt% Copper Content

The Effect of A Small Amount of Tungsten on the Microstructure of Mechanically Alloyed Ag37cu63

Effects of Al on the precipitation of B2 Cu-rich particles in Fe–Cu ferritic alloy: Experimental and theoretical study

Evolution and strengthening mechanism of metastable precipitates in Cu-2.0 wt% Be alloy

Influence of particulate B4C with high weight fraction on microstructure and mechanical behavior of an Al-based metal matrix composite

Phase field study of effect of Al on Cu-rich precipitates in Fe-Cu-Mn-Al alloys

Microstructure evolution and magnetic properties of metastable immiscible Cu-Fe alloy with micro-alloying B element

Effect of Cu on Nanoscale Precipitation Evolution and Mechanical Properties of a Fe-NiAl Alloy.

Effect of Cu Content on the Precipitation Behaviors, Mechanical and Corrosion Properties of As-Cast Ti-Cu Alloys

Co-precipitated Ni/Mn Shell Coated Nano Cu-rich Core Structure: A Phase-Field Study

Strengthening Effect of Ag Precipitates in Cu–Ag Alloys: A Quantitative Approach

Nanoscale Cu particle evolution and its impact on the mechanical properties and strengthening mechanism in precipitation-hardening stainless steel

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Effect of Accelerated Fe-Rich Precipitation Induced by Ag Addition on the Microstructure and Comprehensive Properties of Cu–10 Wt Pct Fe Alloys

Microstructure Evolution and Mechanical Property of Cu-Bearing High-Strength Steel Produced by Simulated Strip Casting

Co-precipitation mechanism of Cu-rich phase and κ-carbide precipitates in Fe-28Mn-10Al-1C-3Cu austenitic low-density steel

Microstructural stability and mechanical properties of BCC-based Fe3.5Cr1.5NiAl0.8 multicomponent alloy

Study of the precipitate evolution mechanism in an Al-Mg-Si-Cu alloy with Si-rich and low Cu composition

Precipitation Characteristics of the Metastable γ″ Phase in a Cu-Ni-Be Alloy

Suppression of discontinuous precipitation by Fe addition in Cu–Ti alloys

Strengthening of Ni-Mn-Cu-Al-Co steel by nanoscale Cu and β-NiAl co-precipitated couples