Abstract:The asphalt mixture designed with the Marshall mix design method has stable quality and convenient technical management, but the design range of the asphalt-aggregate ratio is small and difficult to adjust, and is therefore difficult to adapt to the design of functional pavement materials with different requirements. In order to solve these problems, the asphalt-filler volume equivalent substitution method (the volume equivalent substitution method) has been proposed. Based on the optimum asphalt-aggregate ratio of the Marshall method, the asphalt-aggregate ratio in the mixture is increased by the equal volume substitution of asphalt and filler. The increase in the asphalt volume is equal to the decrease in the filler volume, and vice versa. With the condition of constant aggregate gradation, the modified asphalt of asphalt mixtures with filler contents of 6.0%, 4.5%, 3.0%, 1.5%, and 0% is designed based on the AC-13 gradation. Based on this, a high-temperature stability test, a low-temperature crack resistance test, a four-point bending fatigue test, and other tests are carried out for the asphalt mixtures. The results show that the dynamic stability of each mix proportion designed with the volume equivalent substitution method is 4924 times/mm even under the most unfavorable conditions (the filler dose is 0%). The maximum bending tensile strain of the specimen with a 0% filler dosage can reach 9667 μ, which is more than twice that of the specimen with a 6% filler dosage. The fatigue test shows that increasing the asphalt content in the mixture is beneficial for improving fatigue durability. The research results show that the material designed by the volume equivalent substitution method has excellent road performance in each proportion. This paper provides a method for the flexible adjustment of the asphalt-aggregate ratio and the asphalt mixture comprehensive road performance. Using this method, the optimum asphalt-aggregate ratio needs to be determined comprehensively according to the stress characteristics and functional requirements of the pavement and the pavement performance index of the mixture, and further research is still needed.

The Design of Superpave Compared with Marshall Design Method

Analysis on gradation of AC-16 asphalt mix with Superpave design method

Study on Low Noise Asphalt Pavement Mixture Design

Experimental Study on Pavement Performances of SBP Modified Asphalt

Structural Mechanics Analysis of Asphalt Pavement Using Large Stone Asphalt Mixture As Base

Principle analysis of the mix design and performance evaluation of the asphalt-filler volume equivalent substitution method

Evaluation and Analysis of Asphalt Concrete Density Based on Core Samples

Determination method of optimum asphalt content in asphalt mixture under considering homogeneity

Comparative Study on Laboratory Performance of Hot- and Warm-mix Asphalt Mixtures

Design Process of Asphalt Mixture Incorporating Compaction-Effort Variable

Research of the Computing Methods of the Theoretical Maximum Specific Gravity of Bituminous Mixtures

Research on Influence of Aggregate Gradation on the Performance of Porous Asphalt Pavement

Gradation Design and Parameter Determination of Warm-Mix-Agent-Modified Asphalt Mixture

Influence of gradation on volume characteristics and engineering performance of asphalt mixture

Experimental Research on Gradation Range and Performance of SMAC13

Mix Design of Sup-13 Mixed with TOR and Crumb Rubber Using Dry Process

Study on the Design Parameter of Graded Macadam Base

Brief Analysis of Microsurfacing Mixture Ratio Design

Comparative Study on the Performance of Asphalt Binder Based on the Penetration and PG

Study on Compaction Properties and Skeleton Structural Characteristics of Porous Asphalt Mixture

Determination method of optimum asphalt content of SMA mixture considering homogeneity