Selection of Optimal Warm-Mix Additive for Recycled Crumb-Rubber Modified Asphalt Binder Based on Rheological Tests and Viscoelastic Models
Wanmei Gui,Li Liang,Lan Wang
DOI: https://doi.org/10.1061/(asce)mt.1943-5533.0004734
IF: 3.2
2023-05-01
Journal of Materials in Civil Engineering
Abstract:Low-carbon environmental protection and reduction of pollution have become development goals for asphalt pavement. Crumb-rubber modified asphalt binder (CRAB) made from recycled scrap tires provides an economical and practical way to salvage the natural raw materials but results in carbon and toxic emissions. Warm-mix technology has been applied to recycled CRABs, forming warm-mixed crumb-rubber asphalt binders (W-CRABs) as effective and efficient green materials to reduce energy consumption and mitigate environmental pollution. In addition, the type and dosage of warm-mix additives are key factors affecting rutting and cracking pavement distress. This study aims to correlate Superpave protocol results with those of fractional viscoelastic models to estimate the high- and low-temperature properties of W-CRABs, including recycled crumb rubber, viscosity reducer (1%, 2%, 3%), and surfactant (0.4%, 0.6%, 0.8%). Bending beam rheometer and dynamic shear rheometer tests were performed to determine experimental parameters such as complex modulus, phase angle, and the ratio of creep rate to creep stiffness (m/S). The fractional derivative model (a connection composed of one spring, one linear dashpot, and two Abel dashpots in series) and the generalized fractional viscoelastic model (a combination of two spring-spot fractional elements in series) were developed to investigate viscoelasticity of W-CRABs. In conclusion, by experimental and modeling methods, this study recommends that, for northwest China with significant temperature differences, the optimal resistance to cracking and rutting can be achieved by mixing 0.6% surfactant and CRABs.
construction & building technology,materials science, multidisciplinary,engineering, civil