Abstract:A TiCl4/AlCl3/MgCl2 (Cat-B) catalyst containing 5.2wt.% Al was prepared by the reaction of TiCl4 with ethanol adduct of AlCl3/MgCl2 mixture. A TiCl4/MgCl2 catalyst (Cat-A) without doped AlCl3 was also prepared by the same method. Ethylene-1-hexene copolymerization catalyzed by Cat-B in the presence of hydrogen showed slightly higher efficiency and higher 1-hexene incorporation than Cat-A. Comonomer incorporation was markedly increased when the cocatalyst AlEt3 was replaced by Al(i-Bu)3. Adding Ph2Si(OMe)2 as external donor in the catalyst system caused decrease in polymerization activity and 1-hexene incorporation. Each copolymer sample was fractionated into three fractions: n-heptane insoluble fraction (fraction A), n-heptane soluble and n-hexane insoluble fraction (fraction B) and n-hexane soluble fraction (fraction C). In most cases the amount of intermediate fraction (fraction B) was smaller than the other fractions and did not increase as the total 1-hexene content increase, indicating the presence of two classes of copolymer fractions with greatly different comonomer content and clear bimodality of the copolymer composition distribution. Doping AlCl3 in the catalyst, changing cocatalyst and adding external donor mainly changed the weight ratio of fraction A to fraction C, but exerted little influences on their composition. According to the sequence distribution data of the fractions, doping AlCl3 in the catalyst resulted in slight decrease of product of reactivity ratios (r1r2) in both fraction A and fraction C.

COPOLYMERIZATION OF PROPENE WITH 1-ALKENES USING A MGCL2/TICL4 CATALYST

Copolymerization of Propene with 1‐alkenes Using a MgCl2/TiCl4 Catalyst

Effects of Precomplexation on Activity of TiCl4/SiO2-MgCl2Catalyst in Propylene Polymerization and Polymer Particle Morphology

Copolymerization of propene with high‐1‐olefin using a MgCl2/TiCl4 catalyst

High temperature polymerization of propylene catalyzed by MgCl2-supported Ziegler–Natta catalyst with various cocatalysts

Highly active Ziegler-Natta Catalysts for propylene polymerization (2) effects of Al/Ti ratio and polymerization temperature

Study on the kinetics of supported catalysts for propylene polymerization in slurry

Ethylene/1-hexene Copolymerization with TiCl4/MgCl2/AlCl3 Catalyst in the Presence of Hydrogen

Alkene Polymerization with Catalysts Containing Ionic Complexes [2L·M@dibenzo-18-crown-6]+[TiCl5·L]– (L = CH3CN, M = Li+, K+)

Influence of Cocatalyst on High Temperature Polymerization of Propylene Catalyzed by Ziegler-Natta Catalyst

Copolymerization of Ethylene and 1-Hexene with TiCl 4 /mgcl 2 Catalysts Modified by 2,6-Diisopropylphenol

COMPOSITION AND TACTICITY DISTRIBUTION OF PROPYLENE BUTENE COPOLYMER

Ethylene/1-Octadecene Copolymerization Using [Eta(5):Eta(1)-C5me4-4-R-1-6-R-C6h2o]Ticl2 Catalysts

Studies on Vocl3/Mgcl2/Nay/Al(2)Et(3)Cl(3) Complex Support Catalysts for the Copolymerization of Ethylene and Propylene

Enhancing Stereoselectivity of Propylene Polymerization with MgCl2-supported Ziegler-Natta Catalysts by Electron Donor: Strong Effects of Titanium Dispersion State

Copolymerization of Propylene and Long-Chain Unsaturated Aromatic Esters with Big Steric Hindrance over TiCl4/MgCl2/AlEt3

With different structure ligands heterogeneous Ziegler–Natta catalysts for the preparation of copolymer of ethylene and 1-octene with high comonomer incorporation

Ethylene/1‐hexene Copolymerization with Supported Ziegler–Natta Catalysts Prepared by Immobilizing TiCl3(OAr) Onto MgCl2

Study on Ethylene-α-Olefin Copolymerization Catalyzed by the MgCl2-Supported and Low Ti-Loading Ziegler–Natta Catalyst

Copolymerization of ethylene and 1-octene catalyzed by a modified Ziegler-Natta catalyst

Effect of Alkylaluminum Cocatalyst on Ethylene/1-Hexene Copolymerization and Active Center Distribution of MgCl2-supported Ziegler-Natta Catalyst