The thermal conductivity measurement for aerogel composite insulation materials by the step-wise transient method in temperature range from 25 to 1200 degrees C

Fan Yu
IF: 1.082
2015-01-01
High Temperatures-High Pressures
Abstract:An experimental system for the thermal conductivity and diffusivity measurement by the step-wise transient method in high temperatures is established, the effective measurement range of thermal conductivity is from 0 to 2.5 W/(m.K), and the highest working temperature is 1250 degrees C. Verification of apparatus was achieved by undertaking measurements on standard reference materials, the relative deviations for the thermal conductivity are within 5% at room temperature compared with the recommended values. The thermal conductivities and diffusivities for silica aerogel composite insulation material in temperature range 25-800 degrees C, and for alumina aerogel composite material in temperature range 25-1200 degrees C are measured in the pressure range 10-101300 Pa. The preliminary uncertainty analyses are performed for alumina aerogel composite material, the values of the overall uncertainties estimated are 3.57% for the thermal conductivity and 6.43% for thermal diffusivity at 25 degrees C, and 5.15% for the thermal conductivity and 8.56% for thermal diffusivity at 1200 degrees C, respectively.
What problem does this paper attempt to address?