Abstract:(Cu50Zr50)(x)(Cu73Ti27)(100-x) (x = 0.63-0.75 at.%) alloys are designed using the proportional mixing of Cu(50)Zr(50 )and Cu73Ti27 binary alloys. Their thermal, mechanical and corrosive properties as well as the glass forming ability (GFA) are systematically investigated. The results show that the studied Cu-based glass forming alloys are bulk metallic glass composites (BMGCs) with off-eutectic compositions and display work-hardening behavior. The glass transition temperature and the reduced glass transition temperature increase and then decrease with increasing x when x >= 0.74 atop, while on the contrary for the critical cooling rate and supercooled liquid region. Both yield strength and fracture strength firstly increase and then decrease with decreasing x when x <= 0.71 at%. The plastic strain of (Cu50Zr50)(0.)(75)(Cu73Ti27)(0.)(25) BMGC is the largest among the studied Cu-based BMGCs. Potentiodynamic polarization measurements show that all studied BMGCs exhibit a step-like anodic polarization behavior, indicating two competitive procedures of pitting corrosion and self-passivization. The corrosion behavior gradually transforms from predominant self-passivization to the pitting corrosion with decreasing x. Both corrosion current density and onset passive current density of (Cu50Zr50)(0.)(75)(Cu73Ti27)(0.)(25) BMGCs are two orders of magnitude lower than those of the other Cu-based BMGCs. The mechanisms for the GFA and the corrosion are also discussed. The present work would shed light on how to design and develop BMGCs with superior comprehensive performances.

A New Cu-Based Metallic Glass Composite with Excellent Mechanical Properties

Fabrication and Mechanical Properties of Cu‐Based Bulk Metallic Glass and Composites

High Tensile Plasticity and Strength of a CuZr-based Bulk Metallic Glass Composite

New Class of Plastic Bulk Metallic Glass.

Mg-based Bulk Metallic Glass Composites with Plasticity and High Strength

Deformation Micromechanisms of a Ti-Based Metallic Glass Composite with Excellent Mechanical Properties

Fe-Based Bulk Metallic Glass with High Plasticity

Fe-based bulk metallic glass matrix composite with large plasticity

Mg-Cu-Zn-Y-Zr Bulk Metallic Glassy Composite with High Strength and Plasticity

A CuZr-based Bulk Metallic Glass Composite with Excellent Mechanical Properties by Optimizing Microstructure

Designing Plastic Cu-based Bulk Metallic Glass Via Minor Addition of Nickel

Microstructure Evolution and Mechanical Properties of A Ti-Based Bulk Metallic Glass Composite

New type of Zr-Al-Ni-Cu bulk metallic glass with high plasticity at room temperature

A Plastic FeNi-based Bulk Metallic Glass and Its Deformation Behavior

Microalloying and Microstructures of Cu-Based Bulk Metallic Glasses & Composites and Relevant Mechanical Properties

Microstructural heterogeneities governing the deformation of Cu47.5Zr47.5Al5 bulk metallic glass composites

Concurrently achieving strength-ductility combination and robust anti-wear performance in an in-situ high-entropy bulk metallic glass composite

Martensitic Transformation and Plastic Deformation of TiCuNiZr-Based Bulk Metallic Glass Composites

Ultrahigh Strength Binary Ni–Nb Bulk Glassy Alloy Composite with Good Ductility

Al-based bulk metallic glass with large plasticity and ultrahigh strength

Composition Design and Properties of Cu–Zr–Ti Bulk Metallic Glass Composites