Abstract:Post-drilling wireline acoustic single-well imaging technology can now detect geological structures tens of meters away from boreholes. Further development of this single-well imaging technology in the logging-while-drilling (LWD) environment will have significant values in real-time applications such as geosteering and reservoir navigation. Based on the wireline imaging application, we propose a new method for the LWD application. In wireline imaging, the four-component (4C) dipole acoustic data are azimuthally rotated to scan the reflectors around the borehole. In LWD, azimuthal scanning is achieved by drilling rotation such that the 4C dipole system in the wireline is replaced by a one-dipole-source and two-receiver LWD system, where the two receivers are mounted on opposite sides of the drill collar. For the LWD application, we first developed the theory for LWD dipole shear-wave reflection imaging and validated the theory using 3D finite-difference waveform modeling. Using the analytical solution, we analyzed the far-field radiation directivity of an acoustic LWD dipole source and the effect of drilling rotation on the shear-wave reflection imaging using the LWD acoustic system. The LWD analysis results show that, for fast formations, the SH-wave is the dominant component for imaging, whereas for slow formations, the P-wave becomes important and can be used for imaging. Our results also indicate that the reflection data acquired by the system are affected by the speed of drilling rotation. The take-off azimuth at the wave radiation may be different from the incident azimuth at the wave reception. Knowing the rotation speed, this azimuth difference can be corrected. A further advantage of using the oppositely mounted receivers is that the reflected wave arrives earlier (later) at the front (back)-side receiver; thus, the arrival time difference between the receivers can be used to eliminate the 180°-azimuth ambiguity of dipole acoustic imaging. For reflection imaging, using the proposed LWD system configuration, we tested its azimuth sensitivity and validated its 180°-ambiguity solution using synthetic LWD and field wireline dipole data. The results of this work, therefore, provide a theoretical foundation for the development of the LWD acoustic reflection imaging system.

Fast Multiple Parameter Inversion of Azimuthal LWD Electromagnetic Measurement

The Resistivity Imaging LWD Method Suitable for Oil-Based Drilling Fluid

A Novel Lateral Resistivity Logging-While-drilling (LWD) Method in Oil-Based Drilling Fluid

Detection performance of azimuthal electromagnetic logging while drilling tool in anisotropic media

An Intelligent Inversion Method for Azimuth Electromagnetic Logging While Drilling Measurements

Inversion Methods Study of Azimuthal EM LWD Tool and Its Applications in Horizontal Well

Real-time forward modeling and inversion of logging-while-drilling electromagnetic measurements in horizontal wells

Numerical simulation and dimension reduction analysis of electromagnetic logging while drilling of horizontal wells in complex structures

2D lateral imaging inversion for directional electromagnetic logging-while-drilling measurements

Parameter Inversion Based on Levenberg-Marquardt Algorithm for Layered Formation Using Electromagnetic Wave Resistivity Tool

Signal detection of lateral resistivity LWD based on C4D technique with oil-based drilling fluid

The Data Supplement Method of Azimuthal EM LWD Based on Deep Learning

Adaptive Global Optimization of Real-Time Boundary Detection From the LWD Azimuthal Electromagnetic Measurements in Layered TI Formation With Arbitrarily Deviated Borehole

Self-adaptive inversion method of electromagnetic-propagation resistivity logging while drilling data

3D inversion of electromagnetic logging-while-drilling data

Coil optimization of ultra-deep azimuthal electromagnetic resistivity logging while drilling tool based on numerical simulation

A Supervised Descent Learning Technique for Solving Directional Electromagnetic Logging-While-Drilling Inverse Problems

A theoretical analysis of the logging-while-drilling dipole acoustic reflection measurement

A Novel Approach for Electromagnetic Logging While Drilling Data Processing

Modeling and Inversions of Acoustic Reflection Logging Imaging Using the Combined Monopole–dipole Measurement Mode

Inversion of Anisotropic Resistivity in Three-dimensional Asymmetric Media and Its Application