Abstract:Surface contact disinfecting technique is a newly developed method for water sterilization. To prepare the antibacterial material having special ability and deeply study the antibacterial process and mechanism of surface contact disinfectant containing quaternary ammonium salts, the antibacterial and temperature responsive functional copolymer (poly (DMAE-BC-co-NIPAAm)) was introduced onto the surface of polyethylene (PE) films by UV-induced photo-grafting method. IR showed that the copolymer of DMAE-BC and NIPAArn were successfully grafted onto the film. The surface of photo-grafted films was investigated through water contact angle (CA) measurements. It was found that the hydrophobicity of the co-grafted film increased with the temperature increasing from 20 degrees C to 40 degrees C. The antibacterial properties of the co-grafted film were mainly investigated using Escherichia coli (E. coli), a kind of gram-negative bacteria, as model bacterium. First, the desorption of bacteria cells adsorbed on the surface co-grafted films was measured. In the 1 mol/L NaCl solution I lower than 35 % bacteria cells was rinsed out from grafted films because the positive change on the antibacterial film surface was shielded, and the desorption rate of E. coli cells decreased with increasing temperature from 20 degrees C to 40 degrees C. The cell-lysis action to bacteria cell was further investigated by measuring the activity of beta-galactosidase. The antibacterial film was put into the cell suspension containing O-nitraphenyl beta-D-galactopyranoside (ONPG) and the changes of absorption at 400 nm with time were measured. The fact indicated that the co-grafted film disrupted the cell inner membrane, and the destroying action to the cell increased with increasing temperature from 20 degrees C to 40 degrees C. The co-grafted film was believed to have both the antibacterial ability and temperature sensitivity, and the antibacterial ability changed with the temperature. The experimental results clearly showed the hydrophobic action played an important effect in both the desorption and cell-lysis steps.

Antimicrobial Expanded Polytetrafluoroethylene Film Prepared by Γ-Ray Radiation Induced Grafting of Poly(acrylic Acid)

Improving the Hydrophilicity of Poly(vinylidene Fluoride) Porous Membranes by Electron Beam Initiated Surface Grafting of AA/SSS Binary Monomers

Surface modification of poly(ethylene terephthalate) (PET) film by gamma-ray induced grafting of poly(acrylic acid) and its application in antibacterial hybrid film

Preparation of Silicon-Modified Antimicrobial Polyethylene Endotracheal Tubes

Controlled Grafting of Comb Copolymer Brushes on Poly(tetrafluoroethylene) Films by Surface-Initiated Living Radical Polymerizations.

Surface Modification of Poly(tetrafluoroethylene) Films Via Plasma Treatment and Graft Copolymerization of Acrylic Acid

PREPARATION AND ANTIBACTERIAL FUNCTION OF PE FILMS CO-GRAFTED WITH DMAE-BC AND NIPAAM

Antibacterial Coatings of Biomedical Surfaces by Polydextran Aldehyde/Polyethylenimine Nanofibers.

Reliability, validity, and responsiveness of the daily sleep interference scale among diabetic peripheral neuropathy and postherpetic neuralgia patients.

Surface modification of low temperature plasma-pretreated ePTFE film by AAc graft copolymerization

Surface Modification and Adhesion Improvement of Expanded Poly(tetrafluoroethylene) Films by Plasma Graft Polymerization

Perfluorinated polymer film with functional group prepared by radiation-induced grafting

Preparation and Properties of Antimicrobial Poly(butylene Adipate-Co-terephthalate)/tio2 Nanocomposites Films

Thermal imidization of poly(amic acid) precursors on surface-modified poly(tetrafluoroethylene) films via graft copolymerization with glycidyl methacrylate

Biocompatible and antibacterial poly(lactic acid)/cellulose nanofiber‐silver nanoparticle biocomposites prepared via Pickering emulsion method

Enhancing gamma irradiation resistance by a‐C film treatment on polytetrafluoroethylene (PTFE) surface

A comparison of genomic selection models across time in interior spruce (Picea engelmannii × glauca) using unordered SNP imputation methods

Effects of Polymer Architecture and Composition on the Adhesion of Poly(tetrafluoroethylene)

Layer-by-layer Assembled Microgel Films Containing Silver Nanoparticles as Antimicrobial Coatings on Plastics

Gelatin‐g‐poly(methyl Methacrylate)/silver Nanoparticle Hybrid Films and the Evaluation of Their Antibacterial Activity

Hydrophilic and antimicrobial properties of acrylic acid and chitosan bigrafted polypropylene melt-blown nonwoven membrane immobilized with silver nanoparticles