Abstract:The polypropylene melt-blown nonwoven membrane (PPM) is widely used in healthcare; however, the highly hydrophobic nature of the PPM readily adsorbs proteins and polysaccharides, which are conducive to bacteria being retained in the network, resulting in biofouling. Therefore, to improve the hydrophilic and antimicrobial properties of PPM, acrylic acid (AA) was first graft-polymerized on PPM (PPM- g-AA) by ultraviolet (UV)-induced photo-grafting polymerization. Chitosan (CS) was then covalently grafted onto PPM- g-AA to obtain the bigrafted PPM (PPM- g-AA- g-CS). Finally, silver (Ag) nanoparticles were immobilized onto PPM- g-AA- g-CS to create the hydrophilic and antibacterial PPM. The surface chemical composition and morphology of the samples were characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy. The hydrophilic and antimicrobial properties of the modified PPM were assessed using static water contact angle measurements, wetting time, and bacteria colony-counting assays. The results show that PPM- g-AA- g-CS with immobilized Ag nanoparticles has excellent antibacterial and hydrophilic properties.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to improve the hydrophilicity and antibacterial properties of polypropylene melt - blown non - woven membrane (PPM). Specifically: - **Background problem**: Polypropylene melt - blown non - woven membrane is widely used in medical devices, such as surgical gowns, coverings and medical packaging, etc., due to its porous structure, high thermal and chemical stability and low cost. However, its surface is highly hydrophobic and easily adsorbs proteins and polysaccharides, which provides conditions for the retention of bacteria in the material network, resulting in biofouling. This surface property limits its application on the surface of biocompatible materials, especially in inhibiting protein adsorption. - **Research objective**: In order to improve the hydrophilicity and antibacterial properties of polypropylene melt - blown non - woven membrane, the researchers adopted the following steps: 1. Use ultraviolet (UV) - induced photo - graft polymerization technology to graft acrylic acid (AA) onto polypropylene melt - blown non - woven membrane (PPM - g - AA) to improve its hydrophilicity and introduce carboxyl groups. 2. Then covalently graft chitosan (CS) onto PPM - g - AA through a carbodiimide coupling agent to obtain double - grafted PPM (PPM - g - AA - g - CS). 3. Finally, immerse the prepared PPM - g - AA - g - CS in silver nitrate (AgNO₃) solution, and fix silver nanoparticles through chelation and reduction processes to further enhance its antibacterial properties. Through these modification steps, the researchers aim to develop a polypropylene melt - blown non - woven membrane with excellent hydrophilicity and antibacterial properties, thereby reducing the risk of biofouling and increasing its application value in the medical and health fields.

Hydrophilic and antimicrobial properties of acrylic acid and chitosan bigrafted polypropylene melt-blown nonwoven membrane immobilized with silver nanoparticles

Immobilization of Silver in Polypropylene Membrane for Anti-Biofouling Performance

Surface immobilization of polymer brushes onto porous poly(vinylidene fluoride) membrane by electron beam to improve the hydrophilicity and fouling resistance

Preparation of Polyacrylonitrile-Based Fibres with Chelated Ag Ions for Antibacterial Applications.

Improving the Hydrophilicity of Poly(vinylidene Fluoride) Porous Membranes by Electron Beam Initiated Surface Grafting of AA/SSS Binary Monomers

Achieving highly effective non-biofouling performance for polypropylene membranes modified by UV-induced surface graft polymerization of two oppositely charged monomers.

Surface Hydrophilization of Microporous Polypropylene Membrane by Grafting Zwitterionic Polymer for Anti-Biofouling

A sulfonated polymer membrane with Ag-based graft: morphology, characterization, antimicrobial activity and interception ability

Antibacterial Coatings of Biomedical Surfaces by Polydextran Aldehyde/Polyethylenimine Nanofibers.

Surface Modification of Electrospun Polyethylenimine/Polyvinyl Alcohol Nanofibers Immobilized with Silver Nanoparticles for Potential Antibacterial Applications

Hemocompatible, antioxidative and antibacterial polypropylene prepared by attaching silver nanoparticles capped with TPGS

Facile synthesis of Ag nanoparticles-loaded chitosan antibacterial nanocomposite and its application in polypropylene

Smart and In-Situ Formation Electrospun Fibrous Membrane for the Control of Antimicrobial Efficacy

Membrane Surface with Antibacterial Property by Grafting Polycation

Preparation and characterization of a permanently antimicrobial polymeric material by covalent bonding

Safe and Effective Ag Nanoparticles Immobilized Antimicrobial Nanononwovens

Highly Potent Silver-Organoalkoxysilane Antimicrobial Porous Nanomembrane

Preparation and characterization of N-isopropyl acrylamide grafted polyvinyl alcohol and chitosan blend films with hydrophobic and antibacterial properties

Bactericidal and antifouling electrospun PVA nanofibers modified with a quaternary ammonium salt and zwitterionic sulfopropylbetaine

Polyurethane Surface with Antibacterial and Antifouling Properties Enabled Via Surface Grafting of Imidazolium Salt Chitosan Graft-Polyzwitterionic Copolymer

Biodegradable nanocomposites prepared from poly(butylene adipate terephthalate) and silver nanoparticles for applications as disposable medical equipments