Abstract:Concerning the environmental hazards owing to the chemical-based synthesis of silver nanoparticles (AgNPs), this study aimed to investigate the possibility of synthesizing AgNPs on the surface polyacrylonitrile (PAN) nanofibers utilizing biomacromolecule lignin. SEM observations revealed that the average diameters of the produced nanofibers were slightly increased from ~512 nm to ~673 nm due to several factors like-swellings that happened during the salt treatment process, surface-bound lignin, and the presence of AgNPs. The presence of AgNPs was validated by transmission electron microscope (TEM) and X-ray photoelectron spectroscopy (XPS) analysis. The amount of synthesized AgNPs on PAN nanofibers was found to be dependent on both precursor silver salt and reductant lignin concentration. Fourier transform infrared-attenuated total reflectance (FTIR-ATR) spectra confirm the presence of lignin on PAN nanofibers. Although the X-ray diffraction pattern did not show any AgNPs band, the reduced intensity of the stabilized PAN characteristics bands at 2θ = 17.28° and 29.38° demonstrated some misalignment of PAN polymeric chains. The water contact angle (WCA) of hydrophobic PAN nanofibers was reduced from 112.6 ± 4.16° to 21.4 ± 5.03° for the maximum AgNPs coated specimen. The prepared membranes exhibited low thermal stability and good swelling capacity up to 20.1 ± 0.92 g/g and 18.05 ± 0.68 g/g in distilled water and 0.9 wt% NaCl solution, respectively. Coated lignin imparts antioxidant activity up to 78.37 ± 0.12% at 12 h of incubation. The resultant nanofibrous membranes showed a proportional increase in antibacterial efficacy with the rise in AgNPs loading against both Gram-positive S. aureus and Gram-negative E. coli bacterial strains by disc diffusion test (AATCC 147-1998). Halos for maximum AgNPs loading was calculated to 18.89 ± 0.15 mm for S. aureus and 21.38 ± 0.17 mm for E. coli. An initial burst release of silver elements within 24 h was observed in the inductively coupled plasma-atomic emission spectrometry (ICP-AES) test, and the release amounts were proportionally expansive with the increase in Ag contents. Our results demonstrated that such types of composite nanofibers have a strong potential to be used in biomedicine.

Surface Modification of Electrospun Polyethylenimine/Polyvinyl Alcohol Nanofibers Immobilized with Silver Nanoparticles for Potential Antibacterial Applications

In-situ synthesis and immobilization of silver nanoparticles on microfibrillated cellulose for long-term antibacterial applications

Anchoring Silver Nanoparticles on Nanofibers by Thermal Bonding to Construct Functional Surface

Electrospinning of Ag Nanowires/polyvinyl Alcohol Hybrid Nanofibers for Their Antibacterial Properties

Safe and Effective Ag Nanoparticles Immobilized Antimicrobial Nanononwovens

Antibacterial Coatings of Biomedical Surfaces by Polydextran Aldehyde/Polyethylenimine Nanofibers.

Electrospun PVA Nanofibrous Membranes Reinforced with Silver Nanoparticles Impregnated Cellulosic Fibers: Morphology and Antibacterial Property

Electrospinning Silk-Fibroin-Based Fibrous Membranes with AgNPs for Antimicrobial Application

Innovative Electrospun Nanofiber Mats Based on Polylactic Acid Composited with Silver Nanoparticles for Medical Applications

Silver nanoparticles in Electrospun Ethyl Hydroxy Ethyl Cellulose-PVA Nanofiber: Synthesis, Characterization and Wound Dressing Applications

Fabrication of Silver Nanoparticles Embedded into Polyvinyl Alcohol (ag/pva) Composite Nanofibrous Films Through Electrospinning for Antibacterial and Surface-Enhanced Raman Scattering (SERS) Activities.

Nanodecoration of electrospun polymeric fibers with nanostructured silver coatings by ionized jet deposition for antibacterial tissues

A Facile Method for the Fabrication of Silver Nanoparticles Surface Decorated Polyvinyl Alcohol Electrospun Nanofibers and Controllable Antibacterial Activities

Fabricating Antibacterial and Antioxidant Electrospun Hydrophilic Polyacrylonitrile Nanofibers Loaded with AgNPs by Lignin-Induced In-Situ Method

Stable and Efficient Loading of Silver Nanoparticles in Spherical Polyelectrolyte Brushes and the Antibacterial Effects

Antimicrobial electrospun nanofiber mats of NaOH-hydrolyzed chitosan (HCS)/PVP/PVA incorporated with in-situ synthesized AgNPs: Fabrication, characterization, and antibacterial activity

Bactericidal and antifouling electrospun PVA nanofibers modified with a quaternary ammonium salt and zwitterionic sulfopropylbetaine

Effects of solvents on electrospun fibers and the biological application of different hydrophilic electrospun mats

A Facile Method for Electrospinning of Ag Nanoparticles/Poly (vinyl Alcohol)/Carboxymethyl-Chitosan Nanofibers

In-Situ and Green Synthesis of Silk Fibroin-Silver Nanoparticles Composite Microfibers for Enhanced Antibacterial Applications

Antibacterial Potential and Biocompatibility of Chitosan/Polycaprolactone Nanofibrous Membranes Incorporated with Silver Nanoparticles