Abstract:Abstract pH is one of the most important parameters for evaluating the scale and corrosion potential of the water during oil and gas production. The effectiveness of chemical treatment can also be influenced by pH in the production tubing and reservoir. Unfortunately, pH is not a conservative parameter that can be determined independently. pH changes from reservoir to surface facilities due to changes in temperature and pressure of the production system and the corresponding G/O/W phase changes. Measured pH value of a produced water sample is often unreliable and influenced by temperature and ionic strength of the solution, degree of degassing and sample preservation. Measuring pH in line or with downhole probe at real field condition can be expensive and difficult. pH can be predicted theoretically from charge balance equations more economically and reliably by assuming a good knowledge of thermodynamic equilibrium constants, activity coefficients, G/O/W flow rates, temperature, pressure, and reliable produced water composition. The author's research group recently developed a new automatic titration method to simultaneously measure total alkalinity and weak organic acids concentrations of brine. The carbonate thermodynamics were evaluated with calcite solubility studies at ultra-high temperature and pressure. The newly developed thermodynamic data and method enable accurate prediction of produced water pH at temperature and pressure typically encountered in deep water production. In this paper, the influences of water chemistry parameters on pH are reviewed. The newly developed automatic alkalinity titration method is discussed. pH calculated by the recently validated thermodynamic constants and activity coefficients are compared with live water pH measurements.

A Ph Model for Calculating the Ph Value of Mixed-Acid-Base Equilibria of Overhead Condensing Systems in Crude Distillation

Calculation model of ammonia desulphurization detergent pH

Relationship Between pH Value and Ions Concentration of Ammonia Desulphuring Cleaning Solution

Phase behavior and pH modelling for ammonia-MEA-water mixtures for corrosion control in water utility applications

Interrelationship of CO2, Weak Acids, Bases, and Ph in Scale Prediction and Control

OPTIMIZING CORROSION INHIBITOR PACKAGE FOR THE CRUDE DISTILLATION OVERHEAD

Mitigation of the ammonium salts corrosion in overhead condensing system of crude tower

A Simple Model for Predicting the Ph Values of Acidic Natural Waters

Investigation of Ph Evolution with Cr(VI) Removal in Electrocoagulation Process: Proposing a Real-Time Control Strategy

A Model to Predict Phase Equilibrium of CH4 and CO2 Clathrate Hydrate in Aqueous Electrolyte Solutions

Inverse Control of pH Process Based on Mechanism Model

pH optimization and control in iron removal process of multi-reactor cascade

Applying a Chemical Equilibrium Model for Optimizing Struvite Precipitation for Ammonium Recovery from Anaerobic Digester Effluent

Measurements and Modeling of the Hydrate Phase Equilibrium Condition of Sour Gas Mixtures in the Presence of Salts and Alcohols

Thermodynamic model of Zn(II)-NH4Cl-NH3-H2O system using MATLAB programming

Thermodynamic analysis on system of Zn-Cl--NH 3-CO3 2--H2O

Estimation Of The Ph Values Of Acidic Surface Waters By Chemical Equilibrium Calculation

Acidification capacity model: formulation and application

Preliminary importance analyses on model for pH in the presence of organic impurities in the aqueous phase for a severe accident of a nuclear power plant

The Study about Model of Hydrochloric Acidification under the Condition of Hydraulic-pulse

Thermodynamic Model of Zn(II)-NH_4Cl-NH_3-H_2O System Using MATLAB Programming