Abstract:Acidic low-level waste radioactive waste solutions were discharged to three unlined seepage basins at the F-Area of the Department of Energy (DOE) Savannah River Site (SRS), South Carolina, USA, from 1955 through 1989. Despite many years of active remediation, the groundwater remains acidic and contaminated with significant levels of U(VI) and other radionuclides. Monitored Natural Attenuation (MNA) is a desired closure strategy for the site, based on the premise that regional flow of clean background groundwater will eventually neutralize the groundwater acidity, immobilizing U(VI) through adsorption. An in situ treatment system is currently in place to accelerate this in the downgradient portion of the plume and similar measures could be taken upgradient if necessary. Understanding the long-term pH and U(VI) adsorption behavior at the site is critical to assess feasibility of MNA along with the in-situ remediation treatments. This paper presents a reactive transport (RT) model and uncertainty quantification (UQ) analyses to explore key controls on the U(VI)-plume evolution and long-term mobility at this site. Two-dimensional numerical RT simulations are run including the saturated and unsaturated (vadose) zones, U(VI) and H(+) adsorption (surface complexation) onto sediments, dissolution and precipitation of Al and Fe minerals, and key hydrodynamic processes are considered. UQ techniques are applied using a new open-source tool that is part of the developing ASCEM reactive transport modeling and analysis framework to: (1) identify the complex physical and geochemical processes that control the U(VI) plume migration in the pH range where the plume is highly mobile, (2) evaluate those physical and geochemical parameters that are most controlling, and (3) predict the future plume evolution constrained by historical, chemical and hydrological data. The RT simulation results show a good agreement with the observed historical pH and concentrations of U(VI), nitrates and Al concentrations at multiple locations. Mineral dissolution and precipitation combined with adsorption reactions on goethite and kaolinite (the main minerals present with quartz) could buffer pH at the site for long periods of time. UQ analysis using the Morris one-at-a-time (OAT) method indicates that the model/parameter is most sensitive to the pH of the waste solution, discharge rates, and the reactive surface area available for adsorption. However, as a key finding, UQ analysis also indicates that this model (and parameters) sensitivity evolves in space and time, and its understanding could be crucial to assess the temporal efficiency of a remediation strategy in contaminated sites. Results also indicate that residual U(VI) and H(+) adsorbed in the vadose zone, as well as aquifer permeability, could have a significant impact on the acidic plume long-term mobility.

Preliminary importance analyses on model for pH in the presence of organic impurities in the aqueous phase for a severe accident of a nuclear power plant

Uncertainty and Sensitivity Analysis of Iodine Release in Severe Accidents of Advanced Pressurized Water Reactors Based on the Latin Hypercube Method and Grey Correlation Coefficients

Prediction of Groundwater Contamination with a Coupled Model in Coastal Areas: A Case Study of Benzene Leaching Accident

A Simple Model for Predicting the Ph Values of Acidic Natural Waters

Phase behavior and pH modelling for ammonia-MEA-water mixtures for corrosion control in water utility applications

Comparative Analysis of pH Prediction Routines in ADM1 and a Specialized Water Chemistry Simulator

Modeling sulfuric acid decomposition in a bayonet heat exchanger in the iodine-sulfur cycle for hydrogen production

A simplified analysis of the Chernobyl accident

Identifying key controls on the behavior of an acidic-U(VI) plume in the Savannah River Site using reactive transport modeling

Chemical Equilibrium Calculation for Evaluating the Buffering Capacity of Acidic Natural Water Equilibria with the Mineral Phase Gibbsite

Finite Element Analysis of Local pH Variations in Electrolysis with Porous Electrodes, Considering Water Self-Ionization

Linear dependence of potential drop at the passive film/solution interface on film-formation potential and pH: Combining first-principles calculations with experiments

Identification of important precursors and theoretical toxicity evaluation of byproducts driving cytotoxicity and genotoxicity in chlorination

A dynamic model to estimate the activity concentration and whole body dose rate of marine biota as consequences of a nuclear accident

Nonignorable Invo Lvement of Cl–, No3–, Co32–, and Hco3– in the Water: Reevaluation on Degradation Pathways and Toxicity Evolution of Uv-Based Aops for Pcmx Decontamination

pH-dependent bisphenol A transformation and iodine disinfection byproduct generation by peracetic acid: Kinetic and mechanistic explorations

Estimation of water quality dynamics under long-term anoxic state in organically polluted reservoir by field observations and improved ecosystem model

Role of pH on indium bioaccumulation by Chlamydomonas reinhardtii

pH-dependent sorption of sulfonamide antibiotics onto biochars: Sorption mechanisms and modeling

Comparison of numerical calculations and ALOHA modeling in consequence assessment of chlorine gas emissions from ethylene dichloride reactors

Calculation and analysis of water activation products source term in AP1000