Catalytic pyrolysis of poplar wood over transition metal oxides: Correlation of catalytic behaviors with physiochemical properties of the oxides
ChenTing Zhang,Lijun Zhang,Qingyin Li,Yi Wang,Qing Liu,Tao Wei,Dehua Dong,Saman Salavati,Mortaza Gholizadeh,Xun Hu
DOI: https://doi.org/10.1016/j.biombioe.2019.03.017
IF: 5.774
2019-05-01
Biomass and Bioenergy
Abstract:<h2>Abstract</h2><p>Metal oxides are frequently used in the formulations of the catalysts for catalytic pyrolysis of biomass. This study aims to investigate the catalytic behaviors of the transition metal oxides (CoO, Cr<sub>2</sub>O<sub>3</sub>, CuO, Fe<sub>2</sub>O<sub>3</sub>, Mn<sub>2</sub>O<sub>3</sub>, NiO, TiO<sub>2</sub> and V<sub>2</sub>O<sub>5</sub>) as well as CeO<sub>2</sub> for the catalytic pyrolysis of poplar wood. The metal oxides, especially TiO<sub>2</sub> and NiO could suppress further cracking of primary products, increasing the tar yield and simultaneously decreasing the gas yield. The V, Mn, Ti or Co-based catalyst promoted the formation of the heavy bio-oil, while the Ce, Cr, Cu or Fe-based catalysts were the opposite. The metal oxides (except Fe<sub>2</sub>O<sub>3</sub>) promoted the formation of alcohols, furan, ketones, acetic acid and phenolics in bio-oil. Fe<sub>2</sub>O<sub>3</sub> catalysts suppressed formation of the derivatives from cellulose and hemicellulose except hydroxyl acetone. Hydroxyl acetone formation was promoted by almost all the oxide catalysts while hydroxyl aldehyde formation was the opposite. Remarkable coke formed over the V, Mn, Cu and Co-based catalysts. These oxides contain multiple valences and could be partially reduced to generate oxygen vacancies, which played important roles in the polymerisation reactions. In addition, the coke species formed on the oxide catalysts were mainly polymeric with low thermal stability.</p>
energy & fuels,biotechnology & applied microbiology,agricultural engineering