Abstract:Catalytic decomposition of benzene was studied by using oxides of vanadium and tungsten supported on titanium oxide (TiO2) catalysts for effective reduction of emissions of toxic organic compounds from waste incineration. Experiments were conducted to evaluate the effects of the catalyst's composition, and operating conditions on benzene decomposition, and the relationship between molecular structures of catalysts and their activity was also investigated through replacing the conventional TiO2 catalyst support by nano-sized TiO2. Trace levels (1 and 10 ppm) of gaseous benzene were catalytically decomposed in a fixed-bed catalytic reactor with monolithic oxides of vanadium and tungsten supported on titanium oxide (V2O5-WO3/TiO2) catalysts under conditions simulating the cooling of waste incineration flue gas. On-line monitoring of trace benzene concentrations before and after the catalyst was achieved by means of resonance enhanced multiphoton ionization-time of flight mass spectrometry (REMPI-TOFMS). Catalysts were characterized by nitrogen adsorption, X-ray diffraction, energy dispersive X-ray spectroscopy, temperature-programmed reduction, and Raman spectroscopy. The effects of several parameters, including catalyst operating temperature, space velocity (SV) and initial benzene concentration, on catalytic oxidation of benzene were investigated. Experimental results indicate that reduction of the initial benzene concentration from 10 to 1 ppm either enhances or decreases the catalytic removal efficiency depending on the adsorption capability as well as the oxidation ability of the catalyst tested. The catalytic activity for benzene oxidation not simply relies on the vanadium content of the catalyst; the molecular structure of vanadium oxide, which is known to be influenced by both vanadium oxide loading and the type of support, is very important. Nano-sized TiO2 supported vanadium oxide catalyst (VWNT) with lowest V loading (0.75 wt.%) provides higher catalytic activity than those of the catalysts with higher V contents (1.31 and 2.92 wt.%) but supported by conventional TiO2 (VWT1 and VWT2). The relatively higher catalytic activity of VWNT may be attributed to: (a) the presence of monomeric VOx species, with one terminal V=O bond as indicated by Raman spectra; (b) fewer impurities confounding active catalytic constituents (V, W and Ti); (c) pure anatase phase of TiO2 rather than a mixture phase of anatase and rutile servicing as catalyst support besides its nano-scale particle size; (d) larger specific surface area, smaller average pore diameter, and narrower pore size distribution contribute higher adsorption ability for benzene. No obvious competition effect between NOx removal and benzene oxidation was observed in this study. Reaction rate constants and activation energies for benzene catalytic oxidation tested by the catalysts were calculated. Lower activation energy obtained from VWNT than those of the two catalysts further confirming the higher catalytic activity of VWNT. Published by Elsevier B.V.

Catalytic Effects of V2O5 on Oxidative Pyrolysis of Spent Cation Exchange Resin

Catalytic effect of cobalt ion on oxidative pyrolysis of cation exchange resin

Catalytic performance improvement of VOCs oxidation over MnOx and GdMnO3 composite oxides from spent lithium-ion batteries: Effect of acid treatment

VOCs degradation with non-thermal plasma and Ag-MnOx catalysis

Disposal of spent V2O5-WO3/TiO2 catalysts: A regeneration principle based on structure-activity relationships from carrier transformations

Experimental evaluation on pyrolysis and gasification characteristics of simulated waste cation exchange resin

Promoting Effect of FeOx Addition on the Mechanochemically Prepared Vanadium-Based Catalyst for Real PCDD/Fs Removal and Mechanism Insight

Preparation of Nickel-Foam-supported Pd/NiO Monolithic Catalyst and Construction of Novel Electric Heating Reactor for Catalytic Combustion of VOCs

Thermocatalytic Conversion of Automotive Shredder Waste and Formation of Nanocarbons As a Process Byproduct

Study on the Decomposition of Trace Benzene over V2O5–WO3/TiO2-based Catalysts in Simulated Flue Gas

Pyrolysis of polyester and viscose fiber over ZSM-5: synergistic effect and distribution of products

The Properties and SCR De‐nox Application of Supported V2O5/TiO2 Catalysts with Different Polymerization State of VOx Species Controlled by the Ph Value of Their Precursors

Catalytic Effects of High-Valent Transition Metal Oxides on Different Carbonization Behaviours of Polyvinyl Alcohol

Effect of multi-type oxides on the catalytic pyrolysis behaviors of 5-amino-1H-tetrazole

A promising method to recover spent V2O5–WO3/TiO2 catalyst: treatment by vanadium–titanium magnetite sintering process

New insights into the effect of polyvinyl alcohol on Co3O4 spinel oxide catalyst for N2O decomposition

PCDD/F removal at low temperatures over vanadium-based catalyst: insight into the superiority of mechanochemical method

ZSM-5@ceramic foam composite catalyst derived from spent bleaching clay for continuous pyrolysis of waste oil to produce monocyclic aromatic hydrocarbons

Coupling of Steam and CaO Derived from Oyster Shells in the Pyrolysis of Waste Poly(ethylene Terephthalate) for the Selective Production of Aromatic Hydrocarbons

Treatment of Spent Radioactive Anionic Exchange Resins Using Fenton-like Oxidation Process

Thermal decomposition and oxidation of cation exchange resins with and without Na 2 CO 3 –K 2 CO 3 salt