Abstract:In recent years, montmorillonite (Mt) has started to be used as a carrier for catalysts and widely utilized inexpensive adsorbent due to its unique structure. However, the used Mt might cause solid-waste pollution without proper dispose. In order to realize the resource utilization of solid waste, a new strategy for preparing high-performance catalysts was proposed using waste Mt-based materials as precursor, providing a new way to reuse abandoned Mt materials. In this study, the waste Mt was obtained by using iron hydroxide oxide (FeOOH) and hexadecylpyridinium chloride (CPC) to simulate the process of adsorption of contaminants (tetracycline, TC) on the montmorillonite composite. The iron oxide/Carbon-Montmorillonite (Fe/C-Mt) composite catalysts were successfully prepared at 700 °C pyrolysis temperature, reconstructing metal and carbon catalytic sites on Mt through the conversion of FeOOH to Fe3O4 and the organic precursors to graphite carbon. According to the investigation of catalytic performances, the sample after pyrolysis of montmorillonite modified by FeOOH, CPC and TC (Fe/CPC/TC-Mt-p) was determined as the optimum catalyst to activate peroxymonosulfate (PMS), and reaching the degradation efficiency of 96.2% in this oxidation system to treat target pollutants (ofloxacin, OFL). The increase of catalyst dosage and PMS concentration promoted the degradation effect of OFL, while initial pH and anionic species in the solution had little effect. Meanwhile, the synergistic effect of metal and carbon catalytic sites enables this system to have high oxidation activity. Here, Fe/CPC/TC-Mt-p/PMS system was developed with accelerating the generation of 1O2, making 1O2 the major reactive oxygen species for OFL degradation. In addition, Fe/CPC/TC-Mt-p catalyst has good stability, and could reach the initial degradation level of OFL after being regenerated by high temperature pyrolysis. This study provides a novel routine to applications of waste mineral materials and improving treatment efficiency of antibiotic wastewater through PMS activation.

Activation of Peroxymonosulfate by Calcined Electroplating Sludge for Ofloxacin Degradation.

CuFe2O4 supported on montmorillonite to activate peroxymonosulfate for efficient ofloxacin degradation

Peroxymonosulfate Activation by Co3O4/SnO2 for Efficient Degradation of Ofloxacin under Visible Light.

Activation of peroxymonosulfate by a stable Co-Mg-Al LDO heterogeneous catalyst for the efficient degradation of ofloxacin

Switching Peroxymonosulfate Activation Pathway from Free Radical to Surface-Bound Radical over MnFe2O4 for Enhanced Degradation of Ofloxacin: Key Role of Size Effect and Surface Hydroxyl Group

Efficient Degradation of Ofloxacin by Magnetic CuFe2O4 Coupled PMS System: Optimization, Degradation Pathways and Toxicity Evaluation

Unraveling the Degradation Mechanism and Interaction Mechanism of Ofloxacin Based on Reactive Oxygen Species Via Electrochemically Activating Peroxymonosulfate

Rapid Removal of Ofloxacin with Peroxymonosulfate Activation Process Mediated by Co3O4/Sludge-derived Biochar Composite: Unveiling the Enhancement of Biochar

Walnut Shell Loaded with Cobalt Ferrite as Efficient Peroxymonosulfate Activator to Degrade Ofloxacin

High Efficient PMS Activation by Synergistic Effects of Bimetallic Sulfide FeS2@MoS2 for Rapid OFX Degradation

Preparation of Fe/C-Mt composite catalyst and ofloxacin removal by peroxymonosulfate activation

Carbon Coated CoO Plates/3d Nickel Foam: an Efficient and Readily Recyclable Catalyst for Peroxymonosulfate Activation

Highly Efficient Activation of Peroxymonosulfate by Biomass Juncus Derived Carbon Decorated with Cobalt Nanoparticles for the Degradation of Ofloxacin.

Enhanced electron transfer for activation of peroxymonosulfate via MoS2 modified iron-based perovskite

Activation of Peroxymonosulfate Using Heterogeneous Fe-doped Carbon-Based Catalyst to Generate Singlet Oxygen for the Degradation of Sulfamethoxazole

Activating Peroxymonosulfate for Efficient Degradation of Oxytetracycline by Regulating the Conversion of the Metal Active Site to the Low Valence State Via Calcination

Activation of Peroxymonosulfate by Magnetic Co-Fe/SiO2 Layered Catalyst Derived from Iron Sludge for Ciprofloxacin Degradation

Facile Preparation of Fe3O4@SiO2 Derived from Iron-Rich Sludge as Magnetic Catalyst for the Degradation of Organic Contaminants by Peroxymonosulfate Activation

Activation of Peroxymonosulfate by a Floating Oxygen Vacancies - CuFe2O4 Photocatalyst under Visible Light for Efficient Degradation of Sulfamethazine

Iron Sludge-Derived Magnetic Fe0/Fe3C Catalyst for Oxidation of Ciprofloxacin Via Peroxymonosulfate Activation

Electrochemical Acceleration of Redox Reaction Cycles on the Surface of Fe2O3-MnO2 Cathode to Activate the Peroxymonosulfate for the Efficient Removal of Levofloxacin