Abstract:As society becomes smarter, advanced optical sensing and imaging technologies utilizing visible and near-infrared regions have become increasingly prevalent. Wire-grid polarizers, which are available for broadband electromagnetic waves, are effective in improving the signal-to-noise ratio of such optical systems and enabling more advanced object detection and analysis. However, to be implemented in everyday products, low-cost manufacturing methods must be developed while maintaining high-performance optical functions. To meet these requirements, we conducted an analysis of the geometry of wire-grid polarizers, and designed and developed a wire-grid polarizer with a nano-triangular wave-shaped structure that can be fabricated using general-purpose manufacturing equipment. Once the mould is prepared, this polarizer can be fabricated via nanoimprinting and metal deposition with a normal angle or electroless plating processes. The polarizer fabricated through electroless Ni plating achieves a transmittance of 40%, which is approximately 1.4 times higher than that achieved in a previous study using electroless Ni plating on a rectangular structure with the same period. In addition, the polarizer fabricated through normal angle Al deposition operates over a wide range of wavelengths from visible light to near-infrared, and achieves a polarization extinction ratio of 24 dB at a wavelength of 550 nm and a high transmittance of 81%. High-performance polarizers can be obtained through normal-angle deposition using general-purpose equipment in contrast to the oblique-angle deposition method employed in the manufacture of conventional rectangular structure-based wire-grid polarizers, thereby contributing to cost reduction and improved manufacturability.

Optimization of Bi‐layered Nano‐wire Grids As High‐efficiency Polarizers for Power Recycling in Liquid‐crystal Displays

Novel Transflective Lcd Based on Patterned Polarizer Using Photoaligrunent Technique

Further improvement of the light efficiency of LCDs via the asymmetric reflection of metallic nanowire gratings

Single Cell Gap Polymer-Stabilized Blue-Phase Transflective Lcds Using Internal Nanowire Grid Polarizer

69.2: Compact Colorfilter and Polarizer Based on Nanowire Grating for Energy Efficient Display

High-performance Nanowire-Grid Polarizers.

Feasibility study on twisted nematic liquid-crystal cell with two cross-embedded wire-grid polarizers as alignment and electrode for projection displays

Bipolar TADF Interlayer for High Performance Hybrid WOLEDs with an Ultrathin Non-Doped Emissive Layer Architecture

Fabrication and Characterization of Bilayer Metal Wire-Grid Polarizer Using Nanoimprint Lithography on Flexible Plastic Substrate

High-efficiency Integrated Polarized Backlight System for Liquid Crystal Display

Thin-film polarizing beam splitters used in liquid crystal projection display

High-Performance, Large Area, Deep Ultraviolet to Infrared Polarizers Based on 40 Nm Line/78 Nm Space Nanowire Grids

30-Nm-Wide Aluminum Nanowire Grid For Ultrahigh Contrast And Transmittance Polarizers Made By Uv-Nanoimprint Lithography

58 Nm Half-Pitch Plastic Wire-Grid Polarizer by Nanoimprint Lithography

Optical Properties of Subwavelength Wiregrid Polarizer Designed for Gan-Based Led

Broadband Vis–NIR Circular Polarizer with Cascaded Aluminum Wire‐Grid

A Quantum Dot Polarizer for Liquid Crystal Displays with Much Improved Efficiency and Viewing Angle

High-performance Large-Area Ultra-Broadband (UV to IR) Nanowire-Grid Polarizers and Polarizing Beam-Splitters

Innovative high-performance nanowire-grid polarizers and integrated isolators

Compact Transreflective Color Filters and Polarizers by Bilayer Metallic Nanowire Gratings on Flexible Substrates

Development and analysis of a nano-triangular wave-shaped polarizer