Abstract:976 nm + 1976 nm dual-wavelength pumped Er-doped ZBLAN fiber lasers are generally accepted as the preferred solution for achieving 3.5 μm lasing. However, the 2 μm band excited state absorption from the upper lasing level (4F9/2 → 4F7/2) depletes the Er ions population inversion, reducing the pump quantum efficiency and limiting the power scaling. In this work, we demonstrate that the pump quantum efficiency can be effectively improved by using a long-wavelength pump with lower excited state absorption rate. A 3.5 μm Er-doped ZBLAN fiber laser was built and its performances at different pump wavelengths were experimentally investigated in detail. A maximum output power at 3.46 μm of ~ 7.2 W with slope efficiency (with respect to absorbed 1990 nm pump power) of 41.2% was obtained with an optimized pump wavelength of 1990 nm, and the pump quantum efficiency was increased to 0.957 compared with the 0.819 for the conventional 1976 nm pumping scheme. Further power scaling was only limited by the available 1990 nm pump power. A numerical simulation was implemented to evaluate the cross section of excited state absorption via a theoretical fitting of experimental results. The potential of further power scaling was also discussed, based on the developed model.

Pulsed Fluoride Fiber Lasers at 3 Μm [Invited]

Gain-Switched Er-Doped Fluoride Fiber Laser at ~3.75 μm

Highly efficient actively Q-switched Er^3+-doped ZBLAN fiber laser operating around 2.8 μm using a La_3Ga_5SiO_14 electro-optical modulator

High-power continuous-wave mid-infrared 2.8 μm Er-doped fiber lasers: A review

High-efficiency longwave 2085 nm laser output in low-loss Ho 3+ -doped fluorotellurite glass fiber by 1976 nm in-band pumping

Recent developments in mid-infrared fiber lasers: Status and challenges

High-power Lasing at 900 Nm in Nd3+-doped Fiber: a Direct Coordination Engineering Approach to Enhance Fluorescence

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Pump quantum efficiency optimization of 3.5 μm Er-doped ZBLAN fiber laser for high-power operation

High Water-Resistant and Thermal Stable Fluoride Fibers for Mid-Infrared Laser

Efficient 2075-nm laser emission from Ho3+-doped fluorotellurite glass in a compact all-fiber structure

165?MHz highly stable femtosecond Er:ZBLAN fiber laser operating at 2.8?μm

Tunable high energy pulse generation in the range of 2.9-3.6 μm enabled by an actively Q switched Er3+/Dy3+ codoped fluoride fiber oscillator

High Power Efficient 3.81 $\mu{\rm M}$ Emission from a Fiber Laser Pumped Aperiodically Poled Cascaded Lithium Niobate

Efficient and wavelength-tunable mid-infrared fluoride fiber laser modulated by Cs x WO 3 nanocrystals

2 Mu M Femtosecond Fiber Laser Source And Its Application For Mid-Ir Supercontinuum Generation

3.46 μm Q-switched Er3+:ZBLAN fiber laser based on a semiconductor saturable absorber mirror

Watt-level dysprosium fiber laser at 3.15 μm with 73% slope efficiency

All-Fiber High-Power 3 GHz Ultrafast Laser System At 2.0 μm

Mid-infrared ultrashort pulses generated from a hybrid mode-locked Er:ZBLAN fiber laser

Versatile and widely tunable mid-infrared erbium doped ZBLAN fiber laser