Abstract:The poly(vinylidene fluoride) (PVDF) as-spun fibers with different spin-stretching ratios were fabricated via melt-spinning method using plunger spinning machine. PVDF fibers with different post-stretching ratios were subsequently obtained by post-stretching method under the thermal treatment condition. The crystal and orientation structure of the fibers were investigated by X-ray diffraction (XRD), differential scanning calorimetry (DSC), polarizing optical microscopy (POM) and so on. The results indicated the orientation of alpha crystal and macromolecular increased with the increasing spin-stretching ratio. Furthermore, as the higher spinstretching ratio increased, the degree of crystallinity of as-spun fiber was prone to perfection. Furthermore, according to the POM photomicrograph, the horizon of extinction position was almost entirely black, and the horizon of diagonal position was getting brighter, due to the increase of the anisotropy of as-spun fibers. This was attributed that the irregular fiber macromolecules were stretched to regular structure. When spin-stretching ratio was 330, the crystallinity of as-spun fiber could reach 56.38% and the orientation factor of alpha(110/200) crystal plane was up to 0.89. In terms of post-stretching technique, the stretching ratios had no significant influence on the degree of crystallinity However, the post-stretching process played a positive role in the transition of the crystal phase from alpha to beta. The molecular chains of the fibers are easier to slip and arrange regularly along the fiber axis during spin-stretching process. The conformation was easier to transfer from alpha phase to beta phase owing to the segmental motion of molecular chains during post-stretching process. Especially, the orientation of beta crystal was also improved at the same time. Specially, when the post-stretching was up to the stage of uniform reduction of fiber diameter, the orientation of beta crystal retained a high level. When post-stretching ratio was 11, the content of beta crystal could account for 82.85% and the orientation factor of beta(110/200) crystal plane was up to 0.83.

Synchrotron Wide‐angle X‐ray Diffraction of Single‐filament PPTA Fibers under Stress

Effects of stretching on crystalline phase structure and morphology of hard elastic PVDF fibers

Analysis of Stress Transfer in Two-Phase Polymer Systems Using Synchrotron Microfocus X-ray Diffraction

An Analysis of Photopolymerization Kinetics and Stress Development in Multifunctional Acrylate Coatings

Synchrotron X-ray Diffraction of a Single Filament and a Bundle of Poly (P-Phenylene Terephthalamide) Filaments

In Situ Small Angle X‐ray Scattering Study on Structural Evolution of Crosslinked Polytetrafluoroethylene During Deformation

Time-Resolved Synchrotron X-ray Scattering Study on Propylene–1-Butylene Random Copolymer Subjected to Uniaxial Stretching at High Temperatures

Stretch-Induced Reverse Brill Transition in Polyamide 46

Studies of High Performance Fibers by Atomic Force Microscopy and Molecular Simulation

Enhancement of Α to Β Phase Transformation in Poly (vinylidene Fluoride) Nanocomposites under Uni-Axial Stretch: Contribution from Restriction of Nano-Particles

Stress Transfer in Microdroplet Tensile Test: Pvc-Coated and Uncoated Kevlar-29 Single Fiber

Stress Transfer of Single Fiber/microdroplet Tensile Test Studied by Micro-Raman Spectroscopy

An Improved Method for Single Fiber Tensile Test of Natural Fibers

Micro‐FT‐IR Study of Stretching a Single Filament: Polymorphic Transition in Nylon 6

A multi-mode stretching apparatus for in situ synchrotron x-ray scattering of polymer materials

In-situ Temperature-Controllable Grazing Incidence X-ray Scattering of Semiconducting Polymer Thin Films under Stretching

Plastic deformation of the microfibrils in wet polyacrylonitrile fibers induced by the stretching field

Crystalline Structure Changes of Poly(vinylidene fluoride) Fibers during Stretching Process

Study of the Microstructure Formation Mechanisms of Poly(ether‐ether‐ketone) Monofilaments Via Melt Spinning

Investigation of Post-Spinning Stretching Process on Morphological, Structural, and Mechanical Properties of Electrospun Polyacrylonitrile Copolymer Nanofibers

The effect of stretching on polyamide – 6: assessment of crystallinity, mechanical properties, and surface roughness